







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Coral Gables, FL
Cabinet installation in Coral Gables typically runs $6,500 to $14,000 for a full set of semi-custom cabinets, and refacing an existing box averages $4,200 to $8,800 depending on door style and finish. Those numbers assume standard layouts. A galley kitchen in a 1940s Coral Gables cottage with out-of-square walls costs more to fit than a newer build off Granada Boulevard, and we tell you which you have before we quote a dollar. Bradford Remodeling Co Coral Gables installs and refaces cabinets as part of full Kitchen Remodeling work, and we put the price in writing before any tools come out of the vehicle. Call (833) 510-5367 to start.
Coral Gables is a city that takes its architecture seriously. Mediterranean Revival homes in the Coral Way corridor, mid-century ranches out toward the Riviera section, and newer construction near Ponce-Davis all have cabinet needs that don’t transfer cleanly from one to the next. Plaster walls, furring strips behind old tile, and ceilings that were never perfectly level are the norm, not the exception. We measure, we shim, we scribe, and we don’t pretend a box store cabinet will drop in like it was milled for the room. Our technicians have up to 22 years of experience and work with a documented roster of name-brand cabinetry, including KraftMaid and Wellborn, so every specification is traceable and every manufacturer warranty stays intact.

When You Need Cabinet Installation & Refacing
Most Coral Gables homeowners call us because something in the kitchen stopped working the way it used to. Here are the situations we run into most often, and each one points to a different scope of work.
- Doors that won’t stay shut. Sagging hinges, stripped screw holes, and drawers that drag on the frame are usually the first visible sign that particleboard boxes from a 1980s or 1990s install have absorbed too much humidity. South Florida’s summer air is hard on cabinet boxes, and once the substrate swells, refacing the front is often the smarter spend.
- A remodel that’s stalled out. You bought the tile and picked the countertop but the cabinet layout keeps fighting you. A galley kitchen in a Coral Gables bungalow with a load-bearing wall in the middle usually needs a different cabinet run than the one that’s there, not just new fronts.
- Out-of-square boxes and unlevel soffits. Older homes in the MacFarlane Homestead area and near the University of Miami campus often have cabinet runs that were scribed to a wall that’s moved a half inch since. New cabinets need shimming and scribing to fit, and a contractor who skips that step leaves gaps you’ll see every day.
- A cosmetic refresh before a sale or rental turnover. Refacing is a legitimate option when the boxes are solid and the layout works. It gets you new doors, drawer fronts, and veneer on the visible surfaces for roughly 40 to 60 percent of the cost of a full replacement.
- Water damage under the sink or behind the dishwasher. Slow leaks rot the cabinet bottom and back panel long before you notice a stain. If the substrate is compromised, refacing won’t hold and we’ll tell you so before you spend money on it.
- Cabinet fronts that no longer match the rest of the kitchen. You replaced the counters and backsplash two years ago and the oak fronts now look dated against them. Refacing with a painted or wood-veneer finish is a real option when the boxes are still sound.
Our Cabinet Installation & Refacing Process
Every project runs on the same sequence. It’s how The Garrison Standard works: no surprise numbers at the door, no scope changes without a signed document, and no finished job without a written guarantee in the homeowner’s hand.
- On-site measure and scope walk. We measure the room, check for out-of-square walls, and identify the soffit and rough-in conditions that affect the install. If refacing is viable, we say so. If it isn’t, we say that too. You get a written price for the scope of work, not a ballpark.
- Material and door-style selection. You choose from documented brands, including KraftMaid and Wellborn, and we confirm specifications against manufacturer requirements. If a finish or door style is back-ordered, we tell you the lead time up front instead of discovering it mid-install. Some clients ask us about prefab panelized options like Boxabl for accessory structures, but for a kitchen cabinet run, milled and scribed cabinetry is what fits Coral Gables homes.
- Demolition and substrate check. We pull the old cabinets and inspect what’s behind them. Water damage, uneven furring, and bad drywall get corrected before anything new goes in. That inspection is where most surprise costs live on kitchen work, and we build it into the price so you don’t get a call mid-job.
- Installation with shimming and scribing. Boxes get leveled, shimmed, and secured to studs. Doors and drawers are hung and adjusted so they close flush and even. For a reface, we remove the doors and drawer fronts, apply the new veneer to the face frames and visible box sides, then hang the new fronts with new hardware.
- Countertop coordination and final trim. If new counters are part of the scope, we coordinate the template and install so the cabinet run matches the measurement. Filler panels, crown, and toe kick get fitted and finished.
- Clean site and signed guarantee. We clean the space, walk the job with you, and hand you the signed 365-Day Done Right Promise. If a door sags or a drawer drags inside that year, we come back and correct it at no charge.
For a broader look at how the cabinetry fits into a full renovation, see our Kitchen Remodeling in Coral Gables page.

Cabinet Installation & Refacing Pricing in Coral Gables
These are Coral Gables market ranges for 2026, based on what the work actually costs locally. The final number depends on linear footage, door style, finish, and whether the substrate underneath is sound. You get a written price before any work starts, and it does not move at the door.
| Scope of work | Typical price range |
|---|---|
| Refacing, standard door style, 20 linear feet | $4,200 – $8,800 |
| Full cabinet replacement, semi-custom, 20 linear feet | $6,500 – $14,000 |
| Full cabinet replacement, custom, 20 linear feet | $12,000 – $22,000 |
| Substrate repair (water damage, drywall, furring) | $600 – $2,400 |
| New hardware and pulls, per kitchen | $350 – $900 |
| Countertop coordination and re-template (if included) | $500 – $1,800 |
What drives the range up in Coral Gables specifically: out-of-square plaster walls in older homes, soffit removal if you want taller uppers, and finish selection. Painted finishes in a light color tend to land near the low end; custom wood veneers and hand-finished stains move toward the high end. If your kitchen has a load-bearing soffit you want removed, that’s a structural line item and we price it separately and in writing before anyone touches it.
The Garrison Standard means the written price you receive is the price you pay for that scope. If we discover something mid-job that we should have caught during the measure walk, that’s on us, not on your budget. Estimates are free. Call (833) 510-5367 for a written number on your kitchen. Live person answers, 24 hours a day.
FAQs – Cabinet Installation & Refacing
Is it cheaper to reface or replace cabinets in Coral Gables?
Refacing is cheaper when the cabinet boxes are structurally sound and the layout works, typically running 40 to 60 percent less than a full replacement. If the boxes have water damage or the layout is wrong for the room, replacement is the honest answer, and we’ll tell you that at the measure walk instead of after demolition. Call (833) 510-5367 for a free assessment.
How long does cabinet installation take in Coral Gables?
A typical cabinet installation runs three to five working days once materials are on site, and refacing is usually two to three days. Coral Gables homes with out-of-square walls or older plumbing rough-ins behind the cabinet run can push that timeline by a day or two. Your written scope includes an expected start and finish date. Call us for a scheduling check.
What does the 365-Day Done Right Promise cover on a cabinet job?
The 365-Day Done Right Promise is a full-year written guarantee on every completed project. If a door sags, a drawer drags, a hinge fails, or the refacing veneer lifts within the year, we come back and correct it at no charge. It covers workmanship, not damage from misuse or a plumbing leak that starts later. Every homeowner gets the signed guarantee in hand at job close.
Do you install KraftMaid and Wellborn cabinets in Coral Gables?
Yes. Bradford Remodeling installs KraftMaid and Wellborn cabinetry, among other documented premium brands, along with fixtures from Kohler and Moen and surfaces from manufacturers we specify in the written scope. Every specification is traceable to the manufacturer, so the product warranty stays intact alongside our own guarantee. Call (833) 510-5367 to talk through door styles and finishes.
Talk to Bradford Remodeling Co Coral Gables
A cabinet project is a measurement problem, a materials problem, and a discipline problem. We treat all three the same way: in writing, on a schedule, with a crew that shows up on time and cleans up when the work is squared away. If you’re ready for a written price on cabinet installation or refacing in Coral Gables, call (833) 510-5367 for a free estimate. A live person answers, day or night, and your estimate is free with no pressure to commit. Learn more about our home services.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables.


