







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Coral Gables Homeowners Choose Unilock Construction
We provide independent Unilock construction service in Coral Gables for homeowners who own Unilock pavers and retaining walls and need installation, repair, or replacement done to spec. What makes our work different is that we treat Unilock as an engineered system: proper base compaction, pinned edge restraint, and the manufacturer’s recommended polymeric sand, not generic concrete-paver shortcuts. We’re Bradford Remodeling Co Coral Gables, and we are an independent Unilock service provider. We are not affiliated with, sponsored by, or authorized by Unilock. We simply know these products and how they behave in South Florida.
Coral Gables is one of the few US cities with its own full-service building department and a Board of Architects that must approve exterior work in most of the city. Even a paver driveway or a patio re-lay can run through design review, and Mediterranean-Revival-compatible materials are part of the conversation. Crews from outside the area get blindsided by this. We plan for it from the first estimate. Call (833) 510-5367 to schedule a free estimate.
Why Trust Bradford Remodeling Co Coral Gables for Your Unilock Construction?

Our technicians have up to 22 years of experience with segmental paving and retaining-wall systems, including the Unilock lines we see most around Coral Gables: Brussels Block, Beacon Hill, Umbriano, and Ledgestone. That matters because each series fails differently. Umbriano’s smooth, mottled face hides joint-sand loss until pavers start to rock. Brussels Block’s tumbled texture and open joints hold moisture and grow efflorescence. Knowing which product you have changes the diagnosis, the base repair, and the materials we bring.
We use Unilock-recommended polymeric sand and edge restraints on repairs and new installations rather than whatever’s on the shelf at a big-box store. That’s warranty-safe practice: the right components installed correctly, and the paver manufacturer’s own specifications respected. Where a manufacturer spec exists, we follow it. Everything we do is backed by our written price before work starts and the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge. As an independent Unilock service provider, we let the product’s own engineering and our written guarantee do the talking.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Coral Gables
Unilock pavers are durable systems, but the failures we see in Coral Gables tend to come from installation details and the local climate, not the paver itself. Here’s what we actually find:
- Efflorescence bloom on Brussels Block and other concrete pavers. White salt deposits appear when moisture migrates through the paver and evaporates at the surface. Coral Gables’ humidity makes it common, and improper sealing or poor drainage makes it worse. The fix is drainage, grading, and the right cleaning approach, not another sealer coat over a wet slab.
- Joint sand erosion and paver shifting on driveways and patios. Polymeric sand that was improperly installed or never refreshed lets water in and weeds out. Once the sand goes, the pavers move. Re-sanding with fresh polymeric sand at the right moisture level restores the interlock.
- Edge restraint failure. Spalling and movement at the perimeter happen when edge restraints are missing or not properly pinned. Without that pinned border, pavers spread outward under load and the whole field loosens.
- Surface scaling in low-lying areas. Freeze-thaw isn’t a South Florida problem, but repeated wetting and drying in poorly drained spots, plus an improper mix or finish during manufacture or a prior repair, can cause scaling. Correcting the grade and drainage is the real fix.
- Base failure under driveways. Coral Gables sits on limestone bedrock with a high water table. A shallow or poorly compacted base, or one that traps water, will fail regardless of how good the pavers are. Base preparation is the job.
Here’s how this usually shows up: a homeowner notices weeds pushing through the joints of a Brussels Block driveway and some pavers near the garage apron are rocking. The usual cause is failed polymeric sand and a missing or broken edge restraint that lets the pavers spread. A qualified installer pulls the affected pavers, re-compacts the base, re-sets the edge restraint, and re-sands with fresh polymeric sand, then re-levels the surface to match the existing grade.
And remember Coral Gables’ design-review layer: on exterior work, correcting drainage or rebuilding a perimeter can touch the Board of Architects review. We build that timeline into the plan instead of leaving it to surprise you mid-job.
Unilock Parts & Our Repair-vs-Replace Approach

The parts that matter most for Unilock performance aren’t the pavers themselves. They’re the polymeric sand and the edge restraints. We use Unilock-recommended products for both on repairs and new installations, because those two components are what prevent callbacks. A premium paver set on a bad base with an unpinned border will fail no matter what the surface looks like on day one.
We source the specific joint sand, restraints, and matching pavers for each job rather than claiming to keep Unilock stock on hand. That means correct color and profile matching for Brussels Block, Beacon Hill, Umbriano, or Ledgestone, and no substitutions that read wrong six months later.
On repair versus replace, we’re honest: when existing pavers are structurally sound, re-sanding and re-leveling is often the better value than tearing out a whole field. We replace only pavers that are cracked or spalled beyond repair. If we can save your field, we’ll tell you. Call (833) 510-5367 for a free estimate and a straight recommendation.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We identify the series (Brussels Block, Beacon Hill, Umbriano, Ledgestone), check the base, the edge restraint, the joint sand, and the drainage and grade. On Coral Gables lots, we look at where water actually goes.
- 2
Written scope and repair or install. You get a written price before any work starts, listing the pavers, polymeric sand, and edge restraint. Then we pull affected pavers, re-compact or rebuild the base, pin the edge restraint, and set the field to match existing grade. For new installations, base prep, compaction, and restraint go in before the first paver.
- 3
Test and verify. We check the surface for rocking, confirm joints are filled and locked, and verify water drains away from the structure rather than pooling. On new work, we confirm the scope matches what’s on the page.
- 4
Guarantee. The site is left clean and the scope is signed off in writing. Every completed project carries the 365-Day Done Right Promise: if it fails within the year, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Coral Gables
We work across the Unilock lines Coral Gables homeowners most often have in place. Brussels Block, the tumbled, classic paver we repair and re-sand frequently. Beacon Hill, for a more textured look on driveways and patios. Umbriano, the smooth, mottled-faced series popular on patios and pool surrounds. And Ledgestone, for wall and accent work. We handle repairs, re-sanding, edge-restraint correction, and full installations on these lines, including paver driveway installation, paver patio installation, and driveway replacement. We only recommend what fits your site, your grade, and Coral Gables’ design-review requirements.
We Also Service These Brands
Unilock is one focus, not our only one. Bradford Remodeling Co Coral Gables is a multi-brand contractor, and our documented material roster includes KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone surfaces, and Kohler and Moen fixtures, alongside exterior products like GAF, James Hardie, Therma-Tru, and Belgard. That breadth means every specification is traceable and quality isn’t left to guesswork, whatever the project.
FAQs – Unilock Construction Service in Coral Gables

Is Bradford Remodeling Co Coral Gables authorized by Unilock? No. We are an independent Unilock service provider and are not affiliated with, sponsored by, or authorized by Unilock. We know the products and install and repair them to the manufacturer’s specifications, and we say so plainly.
Do you use genuine Unilock or OEM parts? We use Unilock-recommended polymeric sand and edge restraints, and we source matching pavers for the specific series. We don’t substitute generic joint sand or unpinned restraints on a Unilock installation, because those are the components that cause most callbacks.
How long does Unilock service take in Coral Gables? Re-sanding and re-leveling a patio or driveway usually takes a day or two. A full paver driveway installation or driveway replacement runs longer, and exterior work in Coral Gables can add 60 to 90 days for Board of Architects review and city building approval. We build that into the schedule up front. Call (833) 510-5367 for a timeline on your job.
What Unilock models and series do you cover? Brussels Block, Beacon Hill, Umbriano, and Ledgestone are the lines we handle most. We repair, re-sand, correct edge restraint, and install across those series.
Will service void my Unilock warranty? Not when the work follows the manufacturer’s specifications. Using the recommended polymeric sand and properly pinned edge restraints is warranty-safe practice. We’re careful to work within those specs and tell you when an existing condition sits outside them.
How much does Unilock construction cost in Coral Gables? Here are the ranges we work from:
| Service | Typical Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Cost depends on square footage, the series you choose, base conditions, and whether drainage or edge restraint needs rebuilding. You get a written price before any work starts. Call (833) 510-5367 for an exact quote; estimates are free.
Book Your Unilock Service in Coral Gables, FL
If your Unilock pavers are shifting, blooming with efflorescence, or losing joint sand, we’ll diagnose the cause and give you a written price before any work starts. Bradford Remodeling Co Coral Gables covers Coral Gables with independent Unilock service backed by the 365-Day Done Right Promise. Call (833) 510-5367 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Coral Gables.












