







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Coral Gables Owner’s Guide
We install and service Unilock-compatible windows and doors in Coral Gables, and most full window replacement here lands between $4,500 and $15,000, while impact-rated installations run $8,000 to $25,000. If a single unit or sash is the problem rather than a whole wall of glass, an exact quote takes one visit and a tape measure. You’ll know the part is failing before you see it fail: the sash drags on the sill in humid weather, the crank on a casement gets stiff and then grinds, and a foggy pane means the sealed glass unit itself has lost its seal. That last one isn’t the frame at all, and it changes the price. Call (833) 510-5367 for a free estimate.
Which Unilock Models This Applies To

Unilock builds windows and doors in families: single-hung, casement, awning, and sliding glass door lines, plus fixed picture units. Each family has its own sash hardware, screen track, weatherstripping profile, and sill cap. The part that fails is almost never shared across families, which is why the model matters more than the brand. Compatibility breaks down at the series level, not the Unilock name level, and assuming otherwise is the single most common ordering mistake we see in Coral Gables.
Here’s how to identify what you have before anyone quotes you:
- Look for the manufacturer label. It’s usually on the inside top of the frame channel on a hung window, or on the side jamb of a casement, and it carries the series and the glass specs.
- Measure the glass visible area and the frame opening, not just one. Sash profile and track width are what parts get matched against, and a quarter-inch off means a return.
- Photograph the hardware. Crank mechanisms, roller assemblies, and lock sets vary by series and are the fastest way to confirm a match.
On the OEM-versus-aftermarket call: for locks, cranks, and rollers, a quality aftermarket equivalent from a supplier who confirms the series is usually fine and less expensive. For a sealed glass unit or a full sash, OEM-spec matters more, because the glazing thickness and the Low-E and impact ratings are engineered to the frame. Coral Gables sits in the High Velocity Hurricane Zone, so a replacement pane or sash that isn’t rated to the same pressure as the original quietly weakens the whole opening. We’re an independent service provider and not affiliated with Unilock; we match parts to the series, we don’t guess.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
A failing unit in South Florida usually announces itself in one of these five ways. Each one points at a different part, and naming the real cause is what keeps the repair from becoming a replacement.
- Foggy or cloudy glass between the panes. The sealed glass unit has lost its desiccant seal. This is a glazing failure, not a frame failure, and it needs a new sealed unit rather than new hardware. In Coral Gables, the daily humidity swings work seals harder than most of the country, so we see it on units under ten years old.
- A crank that grinds or feels loose. The operator mechanism or the hinge arm is worn. Left alone, a stiff crank snaps the arm and can crack the sash corner.
- The sash won’t stay up, or drops when you lift it. The balance or spiral spring inside the jamb is failing. This is the part that fails first on hung windows, and it’s a jamb repair, not a sash swap.
- Water on the interior sill after a hard rain. Worn weatherstripping, a failed sill cap, or a clogged weep channel. Coral Gables rain is heavy and sideways, so a compromised sill seal shows up fast; this one is worth stopping early because water tracking into the wall is expensive.
- The door drags, sticks, or won’t latch flush. On a sliding or hinged exterior door, this is usually worn rollers, a sagging track, or a shifting hinge, and occasionally the frame itself has moved with the house.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed window and door work in Coral Gables runs in a predictable band, and we give you the number in writing before any tool comes out. Here’s what the work costs here:
| Scope | Installed range |
|---|---|
| Window replacement (full unit) | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
What moves the number: the number of openings, the series and glazing spec (impact-rated glass costs more and is often required here), access and scaffold on second-story units, and whether the wall opening needs repair once the old frame comes out. Parts-plus-labor is quoted as a line item, so you see the part, the labor, and the disposal separately. Single-part repairs sit well below those full-install numbers, and we tell you when a repair is the honest call. Every completed job carries our 365-Day Done Right Promise: a written, full-year guarantee, and if the work fails inside that window we come back and correct it at no charge. Our technicians have up to 22 years of experience.
DIY or Call Us?
Some of this you can safely check yourself. Clean the weep channels with a soft brush, clear debris from the track, tighten a loose latch screw, and confirm the label so you know your series. Do the measuring and photography listed above. That’s real information you can hand to whoever quotes the work.
What you shouldn’t do is open a sealed glass unit, pull a sash on a second-story impact window, or reset a track on a sliding exterior door by yourself. A failed impact sash carries real weight, and a unit that’s reinstalled without a proper seal and anchor leaves the opening weaker than before in hurricane country. We’d rather you call than get hurt or void a warranty. Our phone is answered by a live person 24/7, so call (833) 510-5367 and we’ll book your free estimate.
FAQs

A well-built frame can hold for 20 years or more here, but the smaller parts age faster: crank operators, rollers, and balances wear out in 8 to 12 years under heavy use, and sealed glass units often fail earlier in our humidity and salt air. The frame usually outlasts the parts inside it, which is why part-by-part repair makes sense first. Call (833) 510-5367 and we’ll tell you what’s worth repairing and what’s worth replacing.
Yes, in most cases. A failed balance, a worn crank, a set of rollers, or worn weatherstripping is a repair, and often a same-visit one. Foggy glass is the exception that pulls you toward a new sealed unit or full replacement, depending on the frame’s condition. Call (833) 510-5367 for a free estimate and a straight answer on repair versus replace.
A hardware repair or part swap is typically a single visit; a full unit or window replacement depends on how many openings and whether the wall opening needs repair, and we put that schedule in writing with the price. You’ll know the timeline before work begins. Call (833) 510-5367 to schedule.
We identify your series from the label and measurements, then source the OEM-spec part or a quality aftermarket equivalent from a supplier who confirms the match, and tell you which one you’re getting and why. We keep no parts stock of our own; every part is ordered to your unit. For wider remodeling, we also work with a documented roster of name-brand materials including KraftMaid, Cambria, and Silestone. Call (833) 510-5367 for a free estimate.
Bradford Remodeling Co Coral Gables is an independently owned and operated member of the Garrison Partners family, held to The Garrison Standard, and is not affiliated with Unilock. We give you a written price before any work starts, our technicians are background-checked and uniformed, and a live person answers the phone 24/7. Call (833) 510-5367 today for your free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












