







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The Coral Gables Owner’s Guide
Replacing roofing that mates with Tremron profile systems in Coral Gables typically runs $8,000 – $20,000 for a full roof replacement, or $400 – $1,800 for a targeted repair, and we install Tremron-compatible roofing to manufacturer specifications. “Tremron-compatible” is the honest phrase: Bradford Remodeling Co Coral Gables is an independent service provider, not affiliated with Tremron, so we match your profiles and specs rather than selling under a brand banner. Owners usually catch the failure the same way: a water stain blooms on a ceiling in the weeks after a wet June, or a tile slides out of line and the underlayment beneath it is already chalky and cracked.
South Florida doesn’t forgive slow weatherproofing. Between the UV load, the salt air pushed inland from Biscayne Bay, and the afternoon downpours that stack water on a low-slope section for an hour at a time, a roofing joint that’s a season past its service life becomes a ceiling repair and a mold inspection. Coral Gables homes built in the 1920s through the 1960s tend to carry the oldest fasteners and the least ventilation, and those two details together decide whether a roofing system lasts 25 years or 12.
Key Takeaways
- Full replacement in Coral Gables: $8,000 – $20,000. Targeted repair: $400 – $1,800. Tile-specific repair: $600 – $2,500.
- Spec match is the whole job. Wrong profile or wrong fastener length means a callback within a season.
- Written price before any tool comes out. Every project carries the 365-Day Done Right Promise.
- Some of this work is genuinely dangerous. We’ll tell you which parts, plainly, below.
Which Tremron Models This Applies To

Tremron makes a broad family of concrete roof tile profiles, and the practical question is never the brand name on the box – it’s the profile, the dimensions, and the fixing method. You need three measurements before anyone can match your roof: the tile’s exposed length (nose to nose of adjacent courses), its width, and the profile shape (barrel, S-tile, flat, low-profile). Pull a single broken tile off the roof edge, measure it flat on the ground, and photograph the underside – the headlap marking and the fastener holes tell the rest of the story. Loose or missing field tiles from a Tremron system are usually a profile-and-fastener problem, not a color problem.
OEM versus aftermarket is a real decision here, and we’ll give you the straight version. Original matching tiles are worth chasing for visible slopes where color and profile must line up with what’s already up there – fading on a 15-year-old concrete tile is real, and a fresh batch will read lighter for a couple of seasons. For non-visible work, a quality aftermarket equivalent that hits the same dimensions and meets Florida product approval for wind uplift does the job and costs less. Either way, the fasteners must be specified for concrete tile and for the wind zone. A common Coral Gables mistake is reusing standard roofing nails in a high-velocity zone; the tile goes back fine and then lifts at the next named storm.
If you also have KraftMaid, Cambria or Silestone work in the house, that’s a separate conversation and we handle those brands too.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Roofing Is Failing
- Interior ceiling stains after heavy rain. Water reaching the drywall usually means the underlayment under the tile has failed or water is tracking down a valley or a penetration. The tile itself can look perfectly fine from the ground while the barrier beneath it is finished.
- Tiles slid out of course or lifted at the hip and ridge. This is a fastener problem: corroded or undersized fixings losing grip on the batten. Wind-driven rain enters through the gap before you ever see a stain.
- Chalky, cracked or torn underlayment visible at an edge. UV exposure breaks down the barrier over time, and any tear becomes a direct path to the deck. This is the failure most owners never see, and the one that ends in deck repair.
- Granules in the gutters or at the drip edge. Concrete tile surface degradation sheds material, and while some loss is normal, steady shedding usually points to age plus the sun load on an unshaded south or west slope in Coral Gables.
- Sagging deck or a soft spot underfoot. This is beyond roofing: water has reached the sheathing and possibly the framing. Stop waiting at this symptom; a repair budget becomes a structural one quickly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what roofing work runs in Coral Gables, priced to cover parts and labor together so you’re not chasing a separate tile invoice:
| Work | Installed Price Range |
|---|---|
| Roof repair (targeted, limited area) | $400 – $1,800 |
| Tile roof repair (profile matching, resetting, flashing) | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
What moves you up the range: how many tiles need matching, whether the underlayment or decking is sound, pitch and access, and whether a second story or a tight lot slows the crew. The lower end is a straightforward repair where the profile is available and the deck is dry. The upper end is where underlayment replacement turns into deck repair and a full lift-and-relay.
You get a written price before any work starts, itemized so you can see parts and labor. No numbers that shift at the door. And every completed project is covered by the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge, in writing.
DIY or Call Us?
To be clear and honest: roofing work belongs to the dangerous category. Climbing a wet, pitched roof to reset tile or check a valley is where people get seriously hurt, and the risk isn’t the job, it’s the fall. We don’t recommend a homeowner get up there to diagnose beyond a visual check from the ground with binoculars.
What you can do safely: note the stain locations, photograph the roof from the yard, check the attic for daylight and damp staining, and confirm whether the issue is one isolated spot or spreading. Take those notes and call us. Our technicians have up to 22 years of experience, and they’ll scope the work and give you a written price. Call (833) 510-5367 and we’ll get the facts before anyone gets on the roof.
FAQs

How long does Tremron roofing last in Coral Gables? A well-installed system with sound underlayment typically runs 20 to 30 years in this climate, but the underlayment is the real clock, not the tile. South Florida’s sun and wet-season rain wear the barrier faster than the tile surface, so an underlayment replacement can be needed well before the tiles look old. Call (833) 510-5367 for an inspection and written estimate.
Can it be repaired instead of replaced? Yes, in most cases. A targeted repair with matched tiles and proper flashing starts at $400 and often holds for years if the deck and underlayment are sound. Replacement only makes sense when the barrier or decking has failed across a large area. Call (833) 510-5367 to find out which one you actually need.
How long does the swap take? A localized repair is usually a single day. A full lift-and-relay or replacement on a typical Coral Gables home runs several days to a couple of weeks depending on square footage, weather windows, and whether decking needs work. We give you the schedule in writing up front, then we stick to it.
How do you source the part? We match your profile, exposed length, and width, then confirm Florida product approval and wind rating before ordering. Where OEM match matters we source the original; where an approved aftermarket equivalent hits spec, we use it and tell you why. Everything is written into the scope. Call (833) 510-5367 and we’ll walk you through the match.
If Tremron roofing is failing on your Coral Gables home, the fix is a spec match and a written price – not guesswork at the door. Bradford Remodeling Co Coral Gables is part of the Garrison Partners family, held to The Garrison Standard: background-checked, uniformed technicians, a live person answering the phone at (833) 510-5367 around the clock, and the 365-Day Done Right Promise on every completed project. Call (833) 510-5367 for your free estimate and get the price in writing before any tool comes out.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












