







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Home Additions & ADU: The Coral Gables Owner’s Guide
Home additions and ADU projects in Coral Gables that are planned around Toto plumbing specifications typically run $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU, depending on footprint, permit scope, and finish level. We’re an independent contractor, not affiliated with Toto, but we plan Toto rough-ins and fixture placement into every addition we build. Most Coral Gables owners we meet discover a problem only after a Toto toilet or fixture has been specified into a plan and the rough-in dimensions don’t line up with the existing drain and supply layout – a mismatch that surfaces at the framing or plumbing-rough inspection, not at the drawing stage.
Key Takeaways
- Addition pricing in Coral Gables: $45,000 – $130,000. ADU pricing: $90,000 – $220,000.
- Toto fixtures require specific rough-in measurements that must be confirmed before the slab or framing is set.
- We’re independent of Toto – we plan to the spec, source documented fixtures, and put the price in writing before work begins.
- Every finished project carries the 365-Day Done Right Promise.
Which Toto Models This Applies To

Toto makes several lines that show up in Coral Gables addition and ADU plans: the Drake and Eco Drake (close-coupled, common in value-focused builds), the Aquia (dual-flush, popular in water-conscious ADUs), the Carlyle and Guinevere (one-piece), and the high-end Neorest and Washlet-integrated toilets. Each line carries a different rough-in distance – the measurement from the finished back wall to the center of the drain. The Drake and Eco Drake come in 12-inch and 10-inch rough-in versions, and getting the wrong one means the tank sits away from the wall or the bowl won’t seat against it. That’s the gotcha that trips up plans that never confirm the model number up front.
To identify the right configuration, read the model and rough-in label under the tank lid, then measure from the finished wall to the closet flange center. For an addition, that finished wall doesn’t exist yet – which is exactly why the fixture has to be chosen before the plumbing rough goes in. On the OEM-versus-aftermarket decision: for a new-build spec, use the genuine Toto fill and flush valve assemblies. Aftermarket equivalents exist and can work, but Toto’s own parts match the manufacturer’s tolerances, and in a five-figure addition the few dollars saved isn’t worth the callbacks. We also work with documented lines like KraftMaid, Cambria, and Silestone for the surrounding finishes so the whole scope is traceable.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Home Additions & ADU Is Failing
“Failing” on an addition or ADU usually means the plumbing or fixture plan for the Toto install is going sideways. Here’s what we see:
- The toilet rocks or sits proud of the wall. The rough-in distance was measured off the framing instead of the finished wall, so the flange center is off by half an inch or more. It shows up the day the toilet is set.
- A slow, recurring drain backup in the new bath. The drain slope on the branch line fell short of the required quarter-inch-per-foot fall, which pools waste and clogs. Correcting it after the slab is poured means breaking concrete.
- Condensation on the tank or bowl in summer. South Florida’s humidity makes a cold tank sweat, and a poorly ventilated new bath keeps the moisture trapped. The fix is ventilation and sometimes a mixing valve, not the toilet itself.
- A supply line that won’t reach the new shutoff. The stop valve location was set for a different fixture style than the Toto model chosen, so the braided supply is short or kinked behind the bowl.
- The fixture spec changes mid-build. A Toto model swapped after rough-in almost always conflicts with the drain position, forcing a re-do of the flange and floor patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Coral Gables, a home addition runs $45,000 – $130,000 and ADU construction runs $90,000 – $220,000. A garage conversion lands in the $30,000 – $80,000 range. Those figures are installed, and they include the design coordination, permit pull, and inspection sign-off – not just framing and drywall. What drives the number up or down: square footage, whether you’re adding a full bath with a Toto rough-in, impact-rated windows and doors (a real cost in this market), and finish level. A slab-on-grade addition costs less than one requiring a raised foundation.
Here’s the pricing commitment: you get a written line-item price before any work starts, and that number doesn’t move at the door. Permits are pulled and inspections passed. Every completed addition and ADU carries the 365-Day Done Right Promise – if the work fails within that year, we return and correct it at no charge. We also handle the adjacent scopes, from the kitchen inside a new ADU to the bathroom fixtures, so there’s one written scope and one guarantee covering the lot.
DIY or Call Us?
Running a supply line or setting a toilet? An owner can safely check the basics: the model number under the tank lid, the rough-in measurement, and whether the existing shutoff reaches. Hanging a light fixture or replacing a flapper, fine. But an addition or ADU is structural, electrical, and plumbing work that crosses into permit territory, and getting the Toto rough-in wrong means breaking slab or opening a finished wall to fix it. That’s not a weekend job, and it’s not a place where guesswork pays.
The electrical rough-in, gas line work, and anything involving the panel or high-voltage wiring are genuinely dangerous – those need a licensed trade, plainly and without drama. That’s the honest split. For the planned build and the fixture plan that goes with it, call us at (833) 510-5367 and we’ll walk the scope and put a number in writing.
FAQs

A home addition generally runs four to seven months and an ADU six to ten months in Coral Gables, depending on permit turnaround and square footage. Coral Gables plan review and the city’s design-review requirements add time you won’t see in other markets, so we build that into the written schedule. Call (833) 510-5367 for a scope-and-timeline estimate – it’s free.
Sometimes yes – if the finding is an isolated rough-in distance or supply-line issue caught before the slab is set, it’s correctable without touching structure, and that’s why we confirm the fixture spec up front. If it surfaces after the concrete or finished wall is in, the correction is more involved. We assess in person and quote the smaller fix if it holds. Call for a free estimate.
No. The written line-item price we give before work begins is the price, and it doesn’t move at the door. If a genuine hidden condition turns up – say, a drain line that isn’t where the plans show – we document it and quote the change in writing before we proceed, so nothing gets added without your sign-off.
We specify the exact Toto model into the plan before rough-in and source genuine Toto fill and flush assemblies to match, so the tolerances are right the first time. Our technicians have up to 22 years of experience planning around fixture specs, and we work from a documented brand roster with manufacturer specs and warranties behind every line. Call (833) 510-5367 to talk through your model.
Ready for a straight number on your Coral Gables addition or ADU? Call Bradford Remodeling Co Coral Gables at (833) 510-5367 for a free estimate. A live person answers around the clock, and every price comes to you in writing before a single tool comes out.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












