







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Windows & Doors: The Coral Gables Owner’s Guide
We install and repair Therma-Tru-compatible windows and doors throughout Coral Gables, and the typical installed price runs $4,500 to $15,000 for window replacement and $8,000 to $25,000 for impact-rated units, depending on the opening count and glazing package. We’re an independent service provider, not affiliated with Therma-Tru, which means we match the right part to your door or window instead of pushing whatever’s on a shelf. Most Coral Gables owners find out something is wrong the same way: a door that suddenly drags on the threshold, a hinge that clicks when you open it, or a gap of daylight where the weatherstripping used to seal tight.
A Therma-Tru entry system is a composite or fiberglass slab hung in a frame with a specific hinge, sill, and seal package. When one component wears out, it rarely announces itself. It shows up as a draft, a squeak, a latch that needs an extra push. Recognizing which part is failing early is what keeps a small repair from becoming a full door replacement.
Key Takeaways
- Most Therma-Tru failures in Coral Gables come from humidity, salt air, and sun exposure, not from the door slab itself.
- Installed replacement runs $4,500 – $15,000 for standard windows and $8,000 – $25,000 for impact-rated units.
- Weatherstripping, hinges, sills, and glass seals are the parts we replace most often.
- You get a written price before any work starts, and every job carries our 365-Day Done Right Promise.
- Call (833) 510-5367 for a free estimate.
Which Therma-Tru Models This Applies To

Therma-Tru makes fiberglass and composite entry doors across several product lines, including the Smooth-Star, Fiber-Classic, and Classic-Craft families, plus the door glass and sidelite systems sold under the Therma-Tru name. The part you need depends on which frame and slab combination you have, and the naming is not always obvious from the outside of the door.
The first thing we do on any Coral Gables job is find the identification label. It’s usually on the hinge-side jamb, sometimes behind the hinge plate itself or on the top edge of the slab, and it carries the series and unit information the manufacturer uses to match components. If that label is missing or painted over, we measure the slab height, width, and thickness directly, along with the hinge spacing and the backset of the lockset. Those measurements do more to confirm the right part than any guess.
The OEM-versus-aftermarket call matters here. Therma-Tru OEM parts fit exactly and carry the manufacturer’s own spec, which is why we default to them when they’re available. Quality aftermarket equivalents can work for consumables like weatherstripping or a standard hinge, and we’ll say plainly when an aftermarket part is the honest choice instead of upselling the OEM. What we don’t do is guess at a fit and hope it closes.
If your home also has KraftMaid cabinetry, Cambria or Silestone surfaces we’ve installed or serviced, we’re glad to look at those on the same visit. It keeps the trip and the paperwork in one place.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Windows & Doors Is Failing
Coral Gables sits in a climate that punishes exterior building products: high humidity year-round, salt air moving inland from Biscayne Bay, and strong afternoon sun on west- and south-facing openings. Those three forces wear out different parts at different rates, and knowing which symptom points to which part saves you from replacing more than you need to.
- Daylight or a draft around the door edge. The weatherstripping has compressed or pulled away from the kerf. Florida humidity softens foam and felt seals faster than in dry climates, and once the seal fails, conditioned air leaves and moisture comes in.
- A door that drags or won’t latch without a push. Usually a hinge that’s worn or a slab that has shifted in its frame. Composite slabs are stable, but a hinge screw backing out of soft jamb wood will throw the whole door off square by a fraction that’s enough to stop the latch.
- Water staining or soft wood at the sill or threshold. The sill or the sill pan under it has failed. This is the one we treat as urgent in Coral Gables because a slow sill leak rots the subfloor and the framing long before it shows inside.
- Fogging between the panes or a cloudy glass seal. The insulated glass unit’s seal has broken. Once the desiccant is spent, condensation forms between the panes and the glass has to be replaced as a unit, not cleaned.
- A latch or deadbolt that turns hard or sticks. The lockset or the strike alignment has worn. Sometimes it’s the hardware; sometimes it’s the door settling and the strike no longer lines up. We check both before quoting a part.
One thing we want to say plainly: if the symptom is a window that won’t open, a door that won’t close, or glass that’s cracked, don’t force it. Forcing a stuck mechanism or leaning on cracked glass invites an injury, and on an impact-rated unit it can compromise the whole opening. Call us and we’ll look at it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Therma-Tru-compatible window and door work runs in Coral Gables. These are installed prices, parts and labor together, with the written price fixed before we start:
| Scope | Installed Price Range |
|---|---|
| Window replacement | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Single entry door replacement (standard) | $1,200 – $3,500 |
| Single entry door replacement (impact-rated) | $2,500 – $6,500 |
| Weatherstripping and seal replacement (per opening) | $150 – $450 |
| Hinge or lockset replacement (per opening) | $120 – $350 |
| Sill and threshold repair | $350 – $1,200 |
| Insulated glass unit replacement (per unit) | $250 – $700 |
The range moves on four things: how many openings, whether the unit is impact-rated (a real requirement in much of South Florida), the glazing and finish you choose, and whether the rough opening is sound or needs repair before the new unit goes in. We pull permits where the work requires them and we don’t start until the written price is in your hand. Every job carries the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge. That’s the whole guarantee, stated plainly.
DIY or Call Us?
Some Therma-Tru checks are safe and smart for an owner to do. You can look for the ID label, feel along the door edge for gaps in the weatherstripping, watch whether daylight shows at the threshold, and test whether the latch and deadbolt line up without forcing them. You can also clean and lubricate hinges and locksets with a light product, and that alone settles a lot of squeaks.
Where DIY goes wrong is the moment you start taking the door off its hinges, prying at a sill, or trying to reset an insulated glass unit yourself. An entry door is heavy, the glass is fragile, and on an impact-rated unit the hardware and glazing are engineered as a system. Get the disassembly wrong and you can crack the glass, damage the frame, or hurt yourself – and then you’re paying for a replacement instead of a repair. The same caution applies if the door is binding because the framing behind it has moved; that’s a structural question, not a hinge question. When in doubt, let us look. Call (833) 510-5367 and we’ll give you a free estimate before anything is touched.
FAQs

A well-installed Therma-Tru door or window should give you 20 years or more on the slab and frame, but the wear parts – weatherstripping, seals, hinges, and finish – typically need attention in the 8-to-12-year range in Coral Gables, where salt air and humidity are harder on exterior products than they are inland. The glass seal is usually the first thing to go. Call (833) 510-5367 for an exact quote, and estimates are free.
Often yes. Weatherstripping, hinges, locksets, sills, and single insulated glass units are all replaceable on their own, which is usually far cheaper than a new door or window. The decision comes down to whether the frame and slab are still sound; if they are, we repair the part. If the framing has rotted or the slab has failed, we’ll tell you that honestly instead of patching it. Call (833) 510-5367 for a free estimate.
A single weatherstripping, hinge, or lockset replacement is usually a couple of hours. A sill repair or an insulated glass unit swap runs most of a day. A full door or window replacement is one to two days per opening depending on the rough opening and the permit inspection. You’ll know the schedule in writing before work starts. Call (833) 510-5367 to book your free estimate.
We identify your unit by its label or by direct measurement, then order the OEM part when it’s available and a quality aftermarket equivalent when that’s the honest call – and we tell you which we’re using and why. We source to the actual opening, not to a guess, so the part fits the first time. Every install is backed by our 365-Day Done Right Promise. Call (833) 510-5367 to get started.
If your Therma-Tru door is letting in air, dragging on the threshold, or showing water at the sill, the fix is usually smaller than it looks – and it’s better to know than to guess. Bradford Remodeling Co Coral Gables works to The Garrison Standard: a written price before any tool comes out, background-checked and uniformed technicians on every job, a live person answering the phone 24/7, and a full-year written guarantee on the work. Call (833) 510-5367 for your free estimate, and we’ll hand you the price and the guarantee in writing.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












