







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Home Additions & ADU: The Coral Gables Owner’s Guide
We install Therma-Tru doors and Therma-Tru-compatible components as part of home additions and ADU (accessory dwelling unit) projects in Coral Gables, and a full addition typically runs $45,000 – $130,000 while a detached ADU runs $90,000 – $220,000, depending on size, foundation work, and how the door and window package is built out. A Therma-Tru exterior door in a new addition is usually where the trouble first shows: you notice daylight at the bottom corner of the slab, the door drags on the threshold in the afternoon, or the deadbolt stops lining up after a rainy week. In Coral Gables, that pattern is almost always the rough opening, the sill pan, or seasonal wood movement rather than a defective door. We’ll give you a written price before any work starts, and every completed project is covered by our 365-Day Done Right Promise.
Which Therma-Tru Models This Applies To

Therma-Tru builds door systems across several product families, and the part you need depends on which family is in the wall. The Fiber-Classic and Smooth-Star lines are fiberglass, Classic-Craft is the premium fiberglass series, and the steel and wood-edge lines show up on older Coral Gables homes. Each has its own sill geometry, hinge prep, and sidelite dimensions, so a “Therma-Tru sill” is not a single part.
The most reliable way to identify what you have is to look at the hinge jamb and the head jamb for the manufacturer’s label, then measure the slab width, height, and thickness. A standard slab is 1-3/4 inches thick, but rough openings vary, and additions built in Coral Gables before the current Florida Building Code often used openings that don’t match today’s nominal sizes. Write those numbers down before you call anyone.
On the OEM-versus-aftermarket question, the decision is straightforward for Therma-Tru specifically: for sills, thresholds, and multi-point hardware, use the OEM part or a manufacturer-approved equivalent, because the weather seal and the water-shedding profile are engineered as one assembly. For hinges, strike plates, and standard locksets, a quality aftermarket part is fine if it matches the prep. We don’t carry parts on a truck and we don’t stock Therma-Tru inventory. We source what your door needs, which is the only way to get the right part the first time. Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with Therma-Tru.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Home Additions & ADU Is Failing
Owners usually call us after a door in a new addition has been giving them trouble for a season or two. These are the symptoms we see most often in Coral Gables:
- Daylight or a draft at the sill or corners. The sill pan was installed flat instead of with a slope to the exterior, or the rough opening wasn’t shimmed and sealed correctly. Water finds that gap first.
- The door drags or sticks in the afternoon. Florida humidity swells framing lumber and can warp a slab that wasn’t sealed on all six sides. If it swings free in the morning and catches by 3 p.m., that’s a moisture issue, not a hinge issue.
- The deadbolt or latch stops lining up. The hinge jamb has shifted, usually because the addition settled or the framing wasn’t fastened to spec. Grinding the strike plate hides the symptom and leaves the door misaligned.
- Fogging or condensation between the glass panes. The insulated glass unit’s seal has failed. In South Florida heat and daily humidity swings, a failed seal shows up faster than most homeowners expect, and the glass has to be replaced, not dried out.
- Rust streaks or soft spots at the bottom rail. Steel and wood-edge doors in a Coral Gables addition take salt air and rain-driven moisture on the same face. Once the bottom rail softens, the door is a replacement, not a repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A door and component replacement inside a Coral Gables addition typically lands inside the $45,000 – $130,000 addition range only when it’s part of a larger scope; a stand-alone Therma-Tru door swap runs far less and is priced as its own line item. A detached ADU project in Coral Gables runs $90,000 – $220,000 depending on size and utility work. What drives the range on any addition: the size and footprint, whether a foundation or slab has to be poured, impact-rated glass required under Florida code, and whether the door package includes sidelites or a transom.
Every quote is a written, line-item price before any work starts. You’ll see the part, the labor, the flashing and sealant, and the disposal as separate lines. No numbers that move at the door. The finished work carries our 365-Day Done Right Promise: if it fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
There’s a real split here, and it’s worth being honest about it. You can safely check a few things yourself: look for the manufacturer’s label, measure the slab, note whether the door binds at a specific time of day, and confirm whether the sill pan is sloped. Those observations make the repair faster and cheaper because the right part gets ordered the first time.
Where DIY goes wrong is the installation itself. Hanging a Therma-Tru door in a new or existing opening means getting the rough opening plumb and square, setting a properly sloped sill pan, flashing the opening correctly, and shimming and sealing to Florida code. A door set wrong leaks, and a leak in a Coral Gables addition can rot framing for years before you see it. It’s also a two-person job with real injury risk if the slab gets away from you. Call (833) 510-5367 and we’ll tell you straight whether it’s a repair or a replacement. Estimates are free.
FAQs

A properly installed Therma-Tru fiberglass door in Coral Gables typically lasts 20 years or more, but the hardware, seals, and insulated glass inside it don’t. Expect to replace weatherstripping and the threshold seal every several years, and plan on a glass unit replacement sooner in a home that takes full afternoon sun and salt air. Call (833) 510-5367 for an exact quote on your door. Estimates are free.
Often yes. Hinges, strikes, locksets, weatherstripping, and threshold seals are all repairable or swappable without touching the door itself. Fogged glass, a soft bottom rail, or a sill pan that was installed flat are replacement territory. We’ll inspect the door and tell you which side you’re on before quoting. Call (833) 510-5367 for a free estimate.
A hardware or seal swap is a same-visit job, usually a couple of hours. A full door slab replacement in an existing opening is typically a one-day job for a two-person crew, with the opening flashed and sealed the same day. An addition or ADU is a multi-week project with its own schedule. Call (833) 510-5367 and we’ll give you a written timeline with the price.
We identify your door’s series and measurements from the label and the slab itself, then order the OEM part or a manufacturer-approved equivalent to match. We don’t guess at parts and we don’t carry Therma-Tru stock on a truck. Our technicians have up to 22 years of experience, and we also work with KraftMaid, Cambria, and Silestone on the interior side of addition projects. Call (833) 510-5367 for a free estimate.
Additions and ADUs in Coral Gables are a written-scope business, and a door is a small part of a big number. We put the price in writing before any work starts, we answer the phone with a live person 24/7, and we back every completed project with the 365-Day Done Right Promise. Call (833) 510-5367 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












