







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Kitchen Remodeling: The Coral Gables Owner’s Guide
Sterling kitchen remodeling in Coral Gables usually runs $14,000 to $45,000 installed, depending on cabinet line, countertop material, and whether the layout changes. Smaller scopes like a cabinet refresh or countertop swap land between $4,000 and $13,000. We work with Sterling cabinetry and the Sterling-compatible hardware and surface packages that fit it, and we’ll give you a written price before any tool comes out.
Most Coral Gables owners don’t discover a Sterling problem all at once. It starts with a door that won’t sit flush after a humid summer, a drawer that drags past the halfway point, or a hinge screw that spins in its hole because the particleboard substrate behind it has swollen. By the time a countertop seam lifts or a cabinet box pulls away from the wall, the failure has usually been building for a full season. That’s the pattern we see again and again in Coral Gables homes built between the 1950s and 1980s, where kitchens run hot, humid, and tight against exterior block walls.
Which Sterling Models This Applies To

Sterling has made kitchen cabinetry and component lines under several series names over the years, and the label matters more than most homeowners realize. Pull a door open and look at the inside face of the cabinet box: you’ll usually find a manufacturer sticker with a series code, a date, and a finish code. If the sticker is gone, measure the door overlay (the amount the door covers the frame) and the box depth. A 1/2-inch overlay and a 12-inch-deep upper box tells a different story than a 3/4-inch overlay with a full-depth box, and that difference decides which hinges and drawer glides will actually fit.
For Sterling specifically, the common compatibility snag is drawer glide hole spacing. Sterling boxes from different production runs use glide mounting patterns that look identical at a glance but are offset by a quarter inch. Order the wrong glide and it will bolt on, then bind two inches into the pull. We measure the existing pattern on the box, not on the failed glide, because the failed part may already have been replaced once with something that never quite worked.
OEM versus aftermarket is a real decision here. Sterling-branded replacements match the original finish and fit but can be slow to source on discontinued series. A quality aftermarket equivalent from a documented maker often outlasts the original and costs less, with the tradeoff that the finish sheen may not match perfectly on visible parts. We’ll tell you which way makes sense for your series rather than defaulting to one answer. Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with Sterling.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Kitchen Remodeling Is Failing
These are the five failures we’re called out for most often in Coral Gables, and what’s actually happening underneath each one:
- Doors that won’t stay aligned. The hinge plate screws have lost bite in swollen particleboard, usually after a wet season. Adjusting the hinge won’t fix it; the mounting point itself needs repair.
- Drawers that drag or jump the track. A worn glide wheel or a bent track, often accelerated by humidity swelling the box sides and pinching the glide. On Coral Gables kitchens facing east, we see this fail faster than on shaded walls.
- Cabinet boxes separating from the wall. Anchor screws pulling out of old block or drywall, sometimes because the original install used the wrong fastener for masonry. This is a structural concern, not cosmetic.
- Countertop seams lifting or darkening. Failed seam adhesive or water wicking into a laminate or stone edge, common where a dishwasher or sink has leaked slowly for months.
- Swollen or soft substrate at the sink base and dishwasher bay. The particleboard floor of the cabinet has absorbed moisture and lost its structure. Once it’s spongy, no hinge or glide will hold a true line.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Coral Gables homeowners actually pay, installed, including labor:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the number: cabinet line and door style, whether the layout changes (which pulls in plumbing and electrical), countertop material (Cambria and Caesarstone sit at the top, laminate at the bottom), and whether the substrate behind the cabinets needs repair. We quote parts and labor separately so you can see exactly where the money goes. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge. Your price is written before work starts and doesn’t move at the door.
DIY or Call Us?
Some of this you can safely check yourself. Open every cabinet, look for the manufacturer sticker, photograph it, and measure your door overlay and box depth. Run a finger along the cabinet floor at the sink base to feel for softness. Those steps cost nothing and tell us a lot before we arrive.
Where DIY goes wrong: re-anchoring a cabinet box that’s pulling from the wall is a structural repair, and getting the fastener wrong on old Coral Gables masonry can mean the box comes down loaded with dishes. Replacing a swollen sink-base floor means cutting out the old substrate and fitting a new one square, which is fussier than it looks. And any work near the sink or dishwasher rough-in touches plumbing, which is where a small mistake turns into a slow leak behind a cabinet you’ll never see.
If you’d rather have it squared away once, call us at (833) 510-5367 for a free estimate. A live person answers, day or night.
FAQs

Expect 15 to 25 years for the boxes and doors in a well-ventilated kitchen, but hardware like glides and hinges typically fails at the 8 to 12 year mark, sooner in humid rooms. Coral Gables humidity is the accelerator: an unvented kitchen with a dishwasher running daily will wear hardware faster than the same cabinets in a drier climate. Call (833) 510-5367 to talk through what’s failing and get a free estimate.
Sometimes, yes. A single hinge can be re-set with a repair plate, and a dragging drawer often just needs a new glide. Repair stops making sense when the substrate itself is soft or the box has pulled from the wall, because new hardware won’t hold in failed material. We’ll tell you honestly which side of that line you’re on.
A hardware or glide replacement is typically a same-visit job of one to two hours. A cabinet installation runs two to five days depending on scope, and a full kitchen remodel with countertops and backsplash runs two to four weeks. We’ll give you a written timeline with your written price so you know what to plan around.
We identify your Sterling series from the label or measurements, then source either the OEM component or a documented aftermarket equivalent from our roster of name-brand suppliers, which includes KraftMaid, Cambria, and Silestone alongside the Sterling-compatible lines. You’ll see the part spec in writing before we order. Call (833) 510-5367 for a free estimate.
If you’re in Coral Gables and your Sterling kitchen has started to show its age, the smartest next step is a written price, not a guess. Call (833) 510-5367 to schedule your free estimate with Bradford Remodeling Co Coral Gables. We’ll measure, identify your series, and put a real number in front of you before anything gets ordered.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












