







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Windows & Doors: The Coral Gables Owner’s Guide
Schluter produces tile and stone installation systems – shower membranes, edge profiles, uncoupling mats, and window and door sealing components in its line – and the windows-and-doors parts we’re asked about most are the sealing and transition components around exterior door thresholds and window perimeters. If that’s what’s failing at your house, the fix is usually a component-level replacement rather than a whole unit swap: window replacement in Coral Gables runs $4,500 – $15,000, while impact-rated units run $8,000 – $25,000, and a threshold or perimeter sealing rebuild sits far below either number because the unit itself stays.
Owners usually find the problem the same way: a dark line creeps up the door jamb after a summer storm, the threshold starts holding water instead of shedding it, or the tile at the window stool sounds hollow under a knuckle. We install and service these assemblies across Coral Gables, and we’ll tell you upfront that Bradford Remodeling Co Coral Gables is an independent service provider, not affiliated with Schluter.
Which Schluter Models This Applies To

Schluter’s exterior sealing work lives in two family lines worth knowing by name. The KERDI line covers waterproofing membranes and sealing bands, and SCHIENE and RENO profiles handle the edge and transition metal at door thresholds and window openings. The parts that actually fail are the seals, bands, and transition strips – not the tile, not the frame.
Identify your part this way. Measure the finished opening width and the reveal depth in inches, then photograph any printed label on the original packaging or on the membrane roll edge if it’s still visible. Schluter marks its membrane rolls and profile strips with printed product names and dimensions; a clear photo of that print removes almost all guesswork. If there’s no label, a thumb’s-width measurement of the profile’s exposed leg plus the reveal depth gets you close.
The OEM-versus-aftermarket call matters more here than most homeowners expect. Schluter’s own sealing bands and profiles carry specific dimension sets and material specs, and a generic hardware-store strip won’t match the profile leg height or the bond the membrane expects. We also work with KraftMaid, Cambria, and Silestone on the interior side, so we’re used to sourcing to spec rather than to whatever’s on the shelf. We keep no parts stock and carry nothing on a truck – the part gets sourced to your measurement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Windows & Doors Is Failing
- Water staining at the door jamb base. The threshold seal has lost its bond where the floor meets the frame, so storm water wicks up the jamb instead of running off. Coral Gables’ afternoon downpours in June through September push that seal harder than most of the country does.
- A hollow sound at the window stool or perimeter. Hollow means the membrane or band has debonded and trapped air behind it. Once that pocket forms, water sits in it rather than draining.
- Visible cracks or lifting in the sealing band. UV exposure and the daily thermal swing on a south- or west-facing opening break down the band’s edge over time. Hairline separation at the profile leg is the first stage.
- The transition profile lifting or rocking. A profile that moves underfoot at a sliding door has lost its setting bed. That movement opens the seal line above it within a season.
- Musty smell near the opening after rain. That’s moisture held behind a failed seal rather than shed by it. By this point the substrate is wet, not just the surface.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

The installed price depends on scope, and we quote it in writing before any work starts. That’s The Garrison Standard, non-negotiable on every job.
| Scope | Installed Range |
| Seal and band replacement at one opening | Component-level, quoted on measurement |
| Threshold and transition profile rebuild | Component-level, quoted on measurement |
| Window replacement (full unit) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
What drives the range: how far the moisture reached before you called, whether the substrate behind the failed seal needs to dry out or be replaced, and whether you’re keeping the existing unit or stepping up to impact-rated. The written price includes the sourced part, labor, and cleanup.
Every completed job carries the 365-Day Done Right Promise. If the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
What you can safely check: photograph the label, measure the opening width and reveal depth, press a knuckle along the window perimeter to find hollow spots, and note where water pools at the threshold. That’s information, not intervention.
Where it goes wrong is tearing out the seal line to see what’s behind it. The moment a homeowner pulls a membrane or band back, the substrate behind it is exposed to open air and the next rain, and a small leak becomes a wet wall cavity. Setting a new band and profile is a sequencing job – surface prep, bond, cure time, and profile alignment – and an amateur install that looks right can fail at the first downpour. That’s a repair inside a wall, not a weekend project.
Call (833) 510-5367 and we’ll quote the repair in writing. A live person answers 24 hours a day, not a voicemail. Estimates are free.
FAQs

Expect 10 – 15 years on a soundly installed exterior seal in this climate, less on a south- or west-facing opening that takes direct summer sun. Coral Gables’ heat and rain cycle wears exterior seals faster than a dry climate does. Call (833) 510-5367 for an exact quote on your opening – estimates are free.
Yes, often. Component-level seal and profile replacement handles most failures and costs dramatically less than a window or door replacement. Whether repair holds depends on whether moisture reached the substrate, which is why we measure and inspect before quoting. Call (833) 510-5367 and we’ll give you the written number before any work starts.
A single-opening component replacement is a same-day job once the correct part is sourced; a full window replacement runs longer depending on count and permitting. We give you the duration in the written scope so there are no surprises. Call (833) 510-5367 to schedule the estimate.
By measurement and label, not by guessing. We take your opening width, reveal depth, and any printed product markings and source the matching Schluter component to those specs. We don’t stock parts or carry them on a truck, so the part is ordered to your opening. Call (833) 510-5367 for an exact quote – estimates are free.
If your Coral Gables window or door is letting water in, stop guessing at the part and get a measured, written number. Bradford Remodeling Co Coral Gables installs and services these assemblies with background-checked, uniformed technicians and a written price before a single tool comes out – backed by The Garrison Standard and the 365-Day Done Right Promise. Call (833) 510-5367 for a free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












