







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Home Additions & ADU: The Coral Gables Owner’s Guide
If you’re pricing a Schluter-compatible home addition or ADU in Coral Gables, plan on $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU, with the written price in your hand before any work starts. Schluter systems are waterproofing and tile-assembly components – uncoupling membranes, shower boards, curbs, channels, and profiles – and they fail at seams, drains, and transitions rather than all at once. In Coral Gables, owners usually find the problem slowly: a hairline crack in the grout line over a membrane, grout that keeps washing out of a shower floor, a hollow thud under a tile, or a soft, dark patch on the ceiling of the room below a newly built bath. Our technicians have up to 22 years of experience reading exactly those symptoms.
Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with Schluter.
Which Schluter Models This Applies To

Most of what we see on additions and ADUs in Coral Gables falls into a handful of Schluter product families. DITRA and DITRA-HEAT are the uncoupling membranes under the tile; KERDI and KERDI-BAND handle waterproofing; KERDI-BOARD and the KERDI-SHOWER line cover shower walls, shower trays, curbs, and niches; DITRA-DRAIN sits on exterior balconies and terraces where Coral Gables rain needs an escape path; SCHIENE, JOLLY, and RONDEC are the edge profiles; and KERDI-LINE handles linear drains.
When you’re identifying the right part, skip the label on the box and measure. Membranes come in rolls stated in square feet or square meters, and a roll marked in metric corresponds to a slightly different coverage than the imperial version – order by the printed coverage or linear measurement, not by the model name alone. Profiles are sized by tile thickness in millimeters, so a 10 mm SCHIENE for a 3/8-inch tile is not the same piece as an 8 mm profile.
The OEM-versus-aftermarket call matters here. Schluter’s own components are engineered as a system: a genuine KERDI-BAND bonded to a genuine KERDI membrane with Schluter’s own thin-set is what the manufacturer’s warranty is written around. A cheaper generic band or a different thin-set can void that coverage. On a project this large, the extra cost of the matching system component is small next to replacing a shower floor in Coral Gables two years later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Home Additions & ADU Is Failing
These are the signals that send Coral Gables homeowners to the phone. Each points to a specific cause.
- Grout cracking along a straight line over the membrane. That line usually follows a membrane seam that was lapped the wrong direction or not sealed with KERDI-BAND. Movement at the joint shows up first in the grout.
- Grout washing out of a shower floor and coming back after re-grouting. Re-grouting hides it for a few months, but water is getting behind the tile because the waterproofing layer below has a break, often at the drain flange.
- A hollow sound when you tap the tile. A dull thud instead of a solid click means the thin-set didn’t bond over that area – a coverage problem that a membrane won’t fix from above.
- Soft or discolored drywall on the ceiling below an added bath. In Coral Gables humidity, a slow leak past a curb or niche shows up downstairs long before it shows up in the shower. That’s a waterproofing failure, not a paint problem.
- Ponding water or efflorescence on an exterior terrace or balcony. DITRA-DRAIN assemblies that weren’t sloped or drained correctly trap water in our summer rain, and the white salt bloom at the edges is the tell.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

What you’re paying for on a Schluter assembly in a Coral Gables addition or ADU is almost entirely labor and tear-out, not the membrane. Here’s how the numbers land against the lead range for this page, $45,000 – $130,000:
| Scope | Installed range |
|---|---|
| Home addition (framing through finish) | $45,000 – $130,000 |
| ADU construction (attached or detached) | $90,000 – $220,000 |
| Garage conversion to living space | $30,000 – $80,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement (tile and waterproofing only) | $3,000 – $8,500 |
What drives you toward the top of a range: full demo and disposal of the failed assembly, re-flashing and re-sloping of a shower pan, impact-rated exterior openings required in this part of Florida, and bringing unmatched framing up to what the new tile assembly needs. Our pricing is written line-item before work starts, and the 365-Day Done Right Promise covers the completed work for a full year – if it fails inside that window, we return and correct it at no charge.
DIY or Call Us?
Owners can safely check the visible surface: tap for hollow spots, look for cracked or missing grout, check for movement at profile edges, and watch the ceiling below a bath for staining after a heavy rain. That’s diagnosis, and it’s useful.
What we don’t recommend is tearing into a Schluter assembly yourself. The failure is usually in the waterproofing layer you can’t see, and resealing the tile over a broken membrane puts a cosmetic patch on a leak that keeps spreading through the framing. Repointing without re-establishing the waterproofing doesn’t stop the damage. This is where we step in. Bradford technicians are background-checked and uniformed, so you know who’s coming through the door, and a live person answers our phone around the clock. Call (833) 510-5367 to schedule your free estimate.
FAQs

A correctly installed and sloped assembly routinely holds up 20 years or more, but our South Florida conditions shorten that when water can’t drain – heavy summer rain on an exterior terrace, constant humidity in an interior shower. The slope and drainage matter more than the membrane’s age. Call (833) 510-5367 for an inspection – estimates are free.
Sometimes, yes – a single loose profile or a localized grout line can be fixed on its own. A leak past the waterproofing layer or a hollow field of tile usually means removing material down to the substrate and redoing the assembly. We tell you which one you’re looking at after we inspect, in writing. Call (833) 510-5367 for an exact quote.
A shower assembly replacement typically runs several days to a couple of weeks depending on tear-out and cure time; a home addition or ADU runs weeks to months, and we put the schedule on the written scope before any work begins. Nothing starts until you’ve signed off on that schedule. Call (833) 510-5367 to schedule your free estimate.
We order the specified Schluter component to match your existing system – correct KERDI-BAND width, profile thickness, and drain series – from documented distributors, so the manufacturer specs and warranty stay intact. We don’t carry parts on a truck; the part is matched to your job and ordered. Our work on kitchens and baths also draws on KraftMaid, Cambria, and Silestone where surfaces are involved. Call (833) 510-5367 to get the exact part and written price in front of you.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












