







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Home Additions & ADU: The Coral Gables Owner’s Guide
We build home additions and ADUs in Coral Gables that are specified with Sakrete concrete and masonry products where the mix is called out on the plans, and the installed cost runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached ADU. Every price is written down before a tool comes out, and every finished structure carries our 365-Day Done Right Promise. We’re an independent contractor and not affiliated with Sakrete; we work to the manufacturer’s published specs.
Owners usually call us after the first hard rain, not the first pour. That’s when a slab edge starts dusting, a footing corner crumbles, or a block wall shows a stair-step crack running up from the base course. Sometimes it starts as a soft spot in a garage floor where a conversion was half-finished. Coral Gables sits on limestone and fill, and old-city lots off Alhambra and the Granada corridors drain in ways that a generic mix design won’t tolerate. When a homeowner recognized Sakrete bagged product on the site and the pour is now suspect, they want to know what the correct mix is, what it costs to redo, and whether the whole project is salvageable. That’s what this page covers.
Which Sakrete Models This Applies To

Sakrete isn’t a machine with a serial number, so there’s no model plate to match against. It’s a line of bagged mixes, and the “part” on your project is a specific product in that line: High-Strength Concrete Mix, Crack-Resistant Concrete, Sand Mix, Mortar Mix, Type S or Type N Masonry Cement, or a Fast-Setting Concrete. Matching the right one is the whole ballgame. A footing poured with Sand Mix instead of High-Strength Concrete is under-spec from day one, no matter how neat the finish looks.
Here’s how to identify what actually went in. Check the bag label or the project receipts for the product name and the yield (usually quoted in cubic feet per bag at a stated thickness). Compare that to the pour volume on your plans. If a contractor substituted a 50 lb. bag of general mix for a 60 lb. or 80 lb. high-strength bag, the compressive strength behind your slab or footing is not what the engineer called for.
The OEM-versus-aftermarket question is simpler here than on a mechanical part. Mix designs are published specs, not proprietary assemblies, so a competing brand’s equivalent 4,000 psi mix can meet the same requirement if it’s named on the plan and properly cured. What matters in Coral Gables is that the mix matches the engineer’s callout, the thickness, and the exposure. We specify against the plans, not against a brand preference, and we note the product on the written scope so there’s no argument later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sakrete Home Additions & ADU Is Failing
Concrete and masonry failures almost always trace back to mix, placement or curing, not bad luck. Watch for these five:
- Dusting or a chalky surface on the slab. Too much water in the mix or a weak product drives the cement paste to the top and leaves a soft, powdery finish. In a Coral Gables addition this often shows first near a door threshold where foot traffic hits it.
- Stair-step cracks up a block or CMU wall. This points to differential settlement under the footing, usually a footing that wasn’t poured at the right depth or on properly compacted fill. Coral Gables’ limestone shelf and old fill lots make this common.
- Crumbling or honeycombed footing edges. Air pockets and cold joints mean the mix wasn’t consolidated or a pour was interrupted. The foundation is now working with less bearing area than the plan assumed.
- Map cracking across a garage or ADU slab. Shrinkage cracking from curing too fast in Florida heat. The slab may still be sound, but if cracks are wide enough to catch a fingernail, water is getting to the subgrade.
- Soft or punky mortar joints in a block wall. Type N mortar used where Type S was specified, or a mix that’s aged out in the bag. Mortar that has sat too long absorbs moisture and loses strength.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

To redo suspect concrete or masonry inside a Coral Gables project, budget the full addition or ADU range, because correcting a bad pour usually means demo and re-pour, not a patch. A home addition runs $45,000 – $130,000 and a detached ADU runs $90,000 – $220,000; a garage conversion where the slab is the problem lands around $30,000 – $80,000. Those numbers include demo of the failed work, subgrade prep and compaction, the specified mix, reinforcement, curing, and finish.
What drives the range: the size of the footprint, how much of the failed pour has to come out, whether the footing depth has to change, and how tight the site is on a Coral Gables lot. We don’t quote a number and move it at the door. Every scope gets a written price before work starts, with the mix called out by product and spec, so you can see exactly what you’re paying for. The finished work is covered by the 365-Day Done Right Promise: if it fails within the year, we come back and correct it at no charge.
DIY or Call Us?
There’s a safe line here. You can check bag labels, read the receipts, measure the visible crack width, and photograph the failure. You can confirm which product was specified on your plans. That’s useful homework, and it makes the first conversation faster.
Structural concrete and masonry work isn’t where you want to improvise. Removing a footing, re-pouring a slab under a load-bearing wall, or rebuilding a block wall on a Coral Gables addition is not a bag-mix-and-a-wheelbarrow job – the mix ratio, consolidation, and curing decide whether the fix holds past the next rainy season, and a footing failure can compromise the whole structure. If you’re seeing stair-step cracks or a crumbling footing, get it looked at by someone who does this. Call (833) 510-5367 and we’ll walk your site, tell you what the failure is, and put a written price in your hand before anything is touched. A live person answers, day or night.
FAQs

A properly specified, placed, and cured footing and slab should hold for decades, but in Coral Gables the real variable is drainage and subgrade, not the bag. Old-city lots with limestone fill and poor storm drainage stress a foundation far more than the mix brand. If your slab is already dusting or cracking within a few years, the product or the placement was wrong. Call (833) 510-5367 for an inspection – the estimate is free.
Sometimes, but only when the failure is cosmetic and the structure is sound. A narrow shrinkage crack in a garage slab can often be sealed and monitored. A crumbling footing or a stair-step crack in a block wall usually means the structural work has to be redone, and patching over it hides a problem you’ll pay for later. We’ll tell you which one you’re looking at. Call (833) 510-5367 for a straight answer and a written scope.
It depends on how much has to come out. A single slab section or wall run is measured in days on site plus curing time before anything builds on it; a footing redo under an existing addition is a matter of weeks once demo and re-pour are sequenced. We give you the timeline in writing with the price, so you’re not guessing. Call (833) 510-5367 to get your project assessed.
We specify to your plans and the engineer’s callout, and we use Sakrete products where the scope calls for them, along with manufacturer-specified materials across the rest of the job. Every product on the written scope is traceable, with the spec and yield stated, so you know what’s in the ground. We work with a documented roster of name-brand materials throughout the build, from KraftMaid and Cambria to Silestone, so nothing is left to guesswork. Call (833) 510-5367 for a free estimate.
Whether your Coral Gables project needs a slab corrected, a footing re-poured, or a full ADU built right from the start, the first step is the same: a written price and a clear scope before any work begins. Our technicians have up to 22 years of experience, they’re background-checked and uniformed, and every completed project is backed by the 365-Day Done Right Promise. Call Bradford Remodeling Co Coral Gables at (833) 510-5367 to schedule your free estimate – a live person answers, 24/7.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












