







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Home Additions & ADU: The Coral Gables Owner’s Guide
We build Plant Prefab-compatible home additions and ADUs for Coral Gables homeowners, with most additions landing between $45,000 and $130,000 and standalone ADUs between $90,000 and $220,000 installed. A finished, permitted ADU build typically runs 4 to 8 months from written agreement to final inspection, and you get a written price before any work begins. We’re an independent contractor and not affiliated with Plant Prefab; we build the on-site foundation, utility connections, finishes and site work that bring a prefab module to a finished, code-compliant structure.
Owners usually land here because something about the plan changed after the modules were ordered: a failed or expired building permit, a foundation that doesn’t line up with the delivered footprint, a city zoning review that came back with a setback problem, or moisture and mold discovered at the module-to-foundation connection months after completion. Coral Gables sits in a high wind zone and a wet subtropical climate, and both facts shape what an addition needs to survive here.
Which Plant Prefab Projects This Applies To

Plant Prefab builds through its own model lines, including ADU plans and custom homes, and the module dimensions, structural tie-down points and utility stub locations vary by model. The first job on any Coral Gables project is identifying exactly what was specified: pull the model sheet and the structural drawings that came with the order, measure the delivered module footprint and foundation anchor layout, and confirm the utility stubs (water, sewer, electrical, and HVAC) against the site plan. If the drawings are missing, the module’s structural labels and the manufacturer’s order reference are what a contractor needs to request replacements.
Here’s the compatibility gotcha that catches Coral Gables owners: local wind-load requirements for the module-to-foundation connection and roof-to-wall ties can be stricter than the baseline spec that shipped with the module, so tie-down hardware and anchor sizing often need to be re-engineered to the local code. That’s not a defect in the prefab; it’s a site-specific engineering step. Parts and materials aren’t carried on any truck, so everything is matched to the actual drawings and inspected scope rather than pulled off a shelf.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Addition or ADU Needs Attention in Coral Gables
These five are the failures we see most, and each points to a specific cause worth pinning down before it gets expensive:
- Water intrusion at the module marriage line or foundation sill. Florida’s driving rain finds the seam where modules join and where the module meets the foundation; failed flashing or sealant lets water in behind the finish.
- Musty smell or visible mold in a corner or under a sill plate. High humidity and condensation behind an insufficient vapor barrier or a gap in the envelope are the usual culprits. This shows up in Coral Gables because the summer dew point stays high for months.
- Door and window frames that stick or won’t latch. Often a foundation movement or settlement issue, or a shift at the module tie-down, rather than the door itself.
- Roof or wall leaks at module seams after heavy rain. Failed sealant, flashing or roofing detail at a joint. It’s cheap to catch early and expensive after the substrate (the structural backing under the finish) has soaked through.
- Failed or expired permits and unclosed inspections. Coral Gables is strict about permits, and an addition with open permits or unrecorded inspections can stall a sale or refinance. We verify what’s on record before we quote.
See the difference
Before
After
Before
After
Before
AfterReplacement and Construction Cost & What’s Included

Installed pricing for this work in Coral Gables breaks down by scope:
- Home addition: $45,000 – $130,000
- Standalone ADU construction: $90,000 – $220,000
- Garage conversion: $30,000 – $80,000
The range is driven by foundation and site work, utility connections, the finish level inside and out, and permitting. We quote parts and labor as line items so you can see what each piece costs, and you get that written price before any work starts. Every completed project carries the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge. Where a separate garage conversion solves the problem better than an addition, we’ll say so and quote it.
DIY or Call Us?
You can safely do the detective work: gather the plan set and structural drawings, read the module labels, photograph the failed seam or water stain, and note where and when it appears. What you shouldn’t do yourself is re-flash or re-seal a module joint, move a structural tie-down, or open a wall to chase moisture, because getting the envelope wrong in South Florida turns a small leak into mold and rot. An addition or ADU touches structure, wind load and permitting, and those need a trained, permitted contractor. That’s the difference between a repair and a callback.
We work with documented, name-brand materials, including KraftMaid, Cambria and Silestone finishes alongside the exterior and structural products that hold a Florida addition together. Calls are answered by a live person, and a free written estimate costs you nothing to get. Call (833) 510-5367 to schedule your free estimate.
FAQs

A well-executed addition or ADU can last decades, but the Florida climate shortens the life of any weak link: sealant at module seams needs inspection and renewal on a routine cycle, and flashing, vapor barriers and exterior finishes take the wear. Lifespan depends on the envelope, not the module. Call (833) 510-5367 for an exact quote, and estimates are free.
Often yes. Most seam leaks, flashing failures and envelope gaps can be repaired without touching the structure, and that’s the cheaper path when caught early. The rebuild scenario is structural movement, widespread water damage or a permit problem that can’t be closed any other way. Call (833) 510-5367, and we’ll tell you which one you’re facing.
A repair or envelope fix can often be scheduled within weeks; a full addition or ADU build runs roughly 4 to 8 months given permitting, foundation, module placement, utility hookups and finishes. Coral Gables permits add time, and no one builds an ADU in a day. Call (833) 510-5367 to schedule your free estimate and a realistic walkthrough.
We match everything to your model’s structural drawings and local code, then source to that spec from documented manufacturers. Nothing comes off a stocked truck. Call (833) 510-5367 for an exact quote, and estimates are free.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












