







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Bathroom Remodeling: The Coral Gables Owner’s Guide
We install Plant Prefab-compatible bathroom remodeling in Coral Gables, with full gut-to-finish bathroom projects typically running $9,000 – $28,000 installed. Smaller refreshes (vanity, shower, tile) sit at $5,000 – $12,000. Because these are planned builds, not emergencies, we schedule the work properly: a written price first, then a reserved start date, then a crew that shows up. No same-day promises on a bathroom rebuild.
Owners usually land here after noticing something small that turns out not to be small. A vanity cabinet pulling away from the wall behind the toe kick. Grout cracking in a line across the shower floor. A tub surround flexing when you step in. Caulk that keeps failing at the same seam every six months. In a humid Coral Gables bathroom, those symptoms usually point at the same three culprits: water behind the substrate, movement in a factory-panel wall, or a fixture set that wasn’t rated for the humidity load.
Which Plant Prefab Models This Applies To

Plant Prefab builds panelized and modular components for several housing lines, and the bathroom scope varies by model. The two things that decide your parts fit are (1) the wall assembly spec – the panel thickness and stud spacing behind the tile – and (2) the fixture rough-in layout, meaning where the drain, the supply lines and the vent sit inside the wall cavity. Modular bathrooms often use a pre-set rough-in pattern that is tighter than a stick-built bathroom, so a standard-issue vanity or shower pan won’t always land on the drain without modification.
To identify what you actually have, pull the build documentation Plant Prefab supplied with the unit: the panel schedule and the fixture list. If you don’t have them, measure the wall cavity depth at the shower valve and the center-to-center distance on the vanity rough-in. Those two measurements separate most model variants.
The OEM-versus-aftermarket call on a Plant Prefab bathroom is different from a conventional house. Plant Prefab proprietary panel profiles and pre-plumbed wall sections have no true aftermarket equal, so for anything structural or behind the tile you want the OEM spec or a fabricator’s match. For fixtures, tile, vanities and surfaces, quality aftermarket equals are fine and usually more durable – KraftMaid and Wellborn vanities, Cambria and Silestone tops, Kohler and Moen fixtures all install cleanly into a Plant Prefab bathroom when the rough-in is measured first. Bradford Remodeling Co Coral Gables is an independent contractor and is not affiliated with Plant Prefab.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Bathroom Remodeling Is Failing
- Flexing shower pan or tub surround. A pan that moves underfoot usually means the setting bed failed or water got under the panel seam. In a modular unit, step back and check whether the pan is bedded to the subfloor or floating.
- Recurring caulk failure at the same seam. If one joint keeps opening, the movement is coming from behind it – typically panel flex or a substrate that’s swelling from moisture. New caulk hides it for a few months, not for good.
- Grout cracks running in a straight line. A crack that follows a line across the tile floor usually tracks a panel joint or a substrate seam. Straight cracks are structural; random cracking is usually just shrinkage.
- Vanity cabinet separating from the wall at the toe kick. Anchor pull-out in a panel-wall bathroom often means the mounting fasteners missed the stud or hit the wrong layer of the wall assembly.
- Musty smell with no visible leak. In Coral Gables, a bathroom that smells damp after a shower usually has a slow leak behind the tile or a missing vapor barrier at the exterior wall. It rarely stays a smell for long.
Replacement Cost & What’s Included

Full bathroom remodeling in Coral Gables runs $9,000 – $28,000. A small bathroom remodel runs $5,000 – $12,000. Where you land in that range is decided by three things: whether the walls behind the tile stay (a fixture swap) or come out (a panel-level rebuild), whether the rough-in moves, and the surfaces you choose.
- Bathroom remodel, full scope: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
Every price is written before work starts, itemized by parts and labor, and it doesn’t move at the door. Finished work carries our 365-Day Done Right Promise: if it fails within a year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Things you can safely check yourself: the location of the shutoff valves, whether caulk seams are cracked, whether the vanity is loose at the wall, and whether the pan flexes when you step in. Write down what you find – those notes make the estimate faster and more accurate.
Where DIY goes wrong in a Plant Prefab bathroom: pulling tile off a panelized wall without knowing the panel profile, opening a wall to chase a leak without confirming where the vapor barrier sits, or resetting a shower pan without re-bedding it to spec. Those mistakes usually cost more to undo than the original repair. If you’ve got movement, a recurring leak, or a panel you can’t identify, call us at (833) 510-5367 and we’ll give you a written range before anyone touches a tool.
FAQs

A properly built bathroom in South Florida typically runs 20 – 30 years for tile and waterproofing and 12 – 20 years for fixtures, but Coral Gables humidity shortens that if ventilation is poor. If a bathroom was built without a working exhaust fan, expect five to eight years off the waterproofing lifespan. Call (833) 510-5367 for an exact quote on your unit – estimates are free.
Often yes, especially if the failure is confined to caulk, grout or a single fixture. Repair stops making sense when water has reached the substrate or when a panel joint has moved. A written inspection will tell you which side of that line you’re on before you spend anything. Call (833) 510-5367 to schedule it.
A vanity or fixture swap is usually one to two days. A shower or tub-to-shower conversion runs four to eight days once materials are on site. A full bathroom rebuild runs two to four weeks in Coral Gables. Your written scope includes a start date and a completion date.
We source Plant Prefab-spec panels and rough-in components by matching your build documentation and on-site measurements, not by guessing at a model number. Fixtures, surfaces and vanities come from documented brands – KraftMaid, Wellborn, Cambria, Silestone and Moen among them – so specs and warranties are traceable. Call (833) 510-5367 for a free estimate.
Get a Written Price Before Any Work Starts
If you’re staring at a failing bathroom in a Plant Prefab home in Coral Gables, the next step is a written price range, not a sales pitch. We’ll measure the rough-in, confirm the panel profile, and hand you a line-item scope you can compare against any other bid. Our technicians have up to 22 years of experience, they’re background-checked and uniformed, and a live person answers the phone 24/7. Every completed project is backed by our 365-Day Done Right Promise. Call Bradford Remodeling Co Coral Gables at (833) 510-5367 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












