







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The Coral Gables Owner’s Guide
PGT kitchen remodeling in Coral Gables typically runs $14,000 to $45,000 installed, depending on cabinet layout, counter surface and whether the rough-in moves. We install PGT-compatible windows, doors and kitchen assemblies with a written price before any work starts, and our technicians have up to 22 years of experience. For owners here, the failure rarely arrives as a single loud bang. It starts as a hairline crack along a window sash joint after a summer of humidity, or a door that suddenly needs a shoulder to close in August but swings free by December. Coral Gables’ salt air and 80-plus percent summer humidity are the usual culprits, and by the time you notice the symptom, the part has often been degrading for a season.
Which PGT Models This Applies To

PGT makes several product lines that show up in Coral Gables kitchens: WinGuard impact windows and doors, the PGT Aluminum series, and vinyl sliding and casement units. The part you need depends on the exact model line, and here’s where most owners get tripped up. WinGuard units carry a manufacturer label on the glass or the frame jamb with a model code stamped on it. That label is the only reliable identification. Measurements alone don’t tell you which series you have, because two PGT units from different lines can share a frame dimension but use incompatible hardware. We always start with the label. If it’s been painted over, we photograph the frame and measure the rough opening, then cross-check against the manufacturer’s model catalog.
On the OEM versus aftermarket question: for PGT specifically, the brand is the safer choice on moving hardware and weatherstrip assemblies. Aftermarket equivalents are cheaper, but the dimensional tolerances on impact-rated weatherstripping are tight, and a few sixteenths of an inch of gap will let water past the sill in a Coral Gables rainy season. For stationary parts like trim and sill plates, a quality aftermarket match is fine. We’re an independent service provider, not affiliated with PGT, and we’ll tell you plainly which way a specific part should go.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Kitchen Remodeling Is Failing
Owners in Coral Gables usually call us after one of these five symptoms shows up.
- A door that sticks in humid months and frees in winter. The rollers or the hinge track has worn and the sash is dragging on the frame. Humidity swells the unit just enough to bind it.
- Fogging between the glass panes. The seal on the insulated glass unit (IGU) has failed. That’s a full IGU replacement, not a sealant touch-up, because once the desiccant is saturated it won’t dry out.
- Water staining on the sill or the wall below the frame. Sill pan weep holes are clogged or the weatherstrip has compressed. Coral Gables’ salt-laden air accelerates weatherstrip breakdown faster than inland markets.
- A crack along the sash weld or frame joint. Thermal cycling from 90-degree afternoons to 75-degree nights stresses vinyl joints. Cracks at the weld are a sign the whole sash assembly is nearing the end of its life.
- Hardware that grinds or goes loose. Locking mechanisms and hinge assemblies with worn bearings. Left alone, they score the track and turn a small part replacement into a full track rebuild.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Coral Gables, an installed PGT-compatible kitchen remodeling scope breaks down like this. Most of the cost sits in cabinets and surfaces, not in the window or door component itself.
| Line item | Installed range |
|---|---|
| Kitchen remodel (full scope) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves on cabinet run length, whether plumbing or electrical rough-in shifts, and surface material. We work with KraftMaid and Wellborn cabinetry, Cambria and Caesarstone surfaces, and Kohler and Moen fixtures. Every project gets a written price before a single tool comes out, and every completed job carries the 365-Day Done Right Promise, which means if the work fails inside a full year, we return and correct it at no charge.
DIY or Call Us?
An owner can safely check a few things. Wipe down the sill and look for weep holes that are clogged with debris. Test the lock by hand. Photograph the manufacturer label for the model code. What you shouldn’t do yourself is replace an impact-rated window component or handle the electrical rough-in that runs behind a kitchen wall. PGT impact units are rated assemblies, and a misinstalled sash or seal voids the rating that protects your home in a named storm. There’s also the rough-in risk: pulling a cabinet or opening a wall around wiring in Coral Gables kitchens built before the 1990s often exposes work that has to be brought up to current code. Call (833) 510-5367 and we’ll look at what you have before anyone touches the wall.
FAQs

Expect 15 to 25 years on the window or door unit itself, with impact seals and weatherstrip needing attention at the 10 to 15 year mark in this climate. Salt air and humidity shorten that. Florida’s coastal exposure is harder on seals than inland markets. Call (833) 510-5367 if your unit is past 12 years and showing any of the symptoms above.
Sometimes. Weatherstrip, weep hole clearance and locking hardware are usually repairable. A failed IGU seal or a crack at the sash weld is not, and trying to seal a fogged IGU from outside doesn’t fix the desiccant. We’ll tell you which side you’re on before we quote. Call (833) 510-5367 for a straight answer and a free estimate.
A single window or door component swap is typically a half-day to a full day. A full kitchen remodel runs weeks, not days, and we’ll put the schedule in writing with your price. Nobody remodels a kitchen same-day, and any contractor who claims otherwise is setting you up for a surprise. Call (833) 510-5367 to schedule a scope review.
We start with the manufacturer label on your unit, confirm the model line and part number, then source from PGT’s parts channel or a documented equivalent. We don’t carry parts on a truck and we don’t claim local stock. What you get is the correct part for your specific model, with the price written down before we order it. Call (833) 510-5367 to get started.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












