







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Westview, FL
We provide independent Mr-Glass service across Westview, FL, and we’re not affiliated with or authorized by the manufacturer. What sets our Mr-Glass work here apart is that every install and repair is built around Westview’s actual housing stock: mid-century concrete-block homes that need custom shimming and Miami-Dade-compliant flashing before a single pane goes in. We know these window openings, door frames, and shower walls because we work on them in ZIP 33167 constantly. Call (833) 510-5367 to schedule a free estimate.
Why Westview Residents Choose Us for Mr-Glass Service

Our technicians have up to 22 years of experience with Mr-Glass aluminum windows, impact units, frameless shower enclosures, and sliding glass doors. That matters in Westview, where most homes predate modern building codes and the original installations have been patched, painted over, or half-replaced by whoever got there first. We don’t carry a dealer badge, and we don’t pretend to. Our expertise comes from thousands of hours in Miami-Dade’s high-velocity hurricane zone, learning which frames can be saved and which can’t.
We source OEM-compatible Mr-Glass parts for rollers, locks, and weatherstripping so the fit is right and any remaining warranty stays intact. When a non-structural piece can meet HVHZ standards with a quality aftermarket equivalent, we’ll use it and tell you why. You get the same written price before work starts as every Bradford project. No numbers move at the door.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Westview
- Corroded aluminum frames and hardware. Westview sits close enough to the coast that salt air and year-round humidity eat into aluminum frames, rollers, and latches. On 1960s Mr-Glass sliders, the rollers are usually the first thing to seize, and by then the perimeter sealant has often failed too.
- Fogged dual-pane glazing. Thermal cycling in South Florida’s heat and near-constant humidity breaks down the seal in dual-pane units. Once moisture gets inside, the glass fogs from the edges in and you lose both visibility and the insulating value you paid for.
- Water intrusion at window and door perimeters. In Westview’s block-and-stucco homes, the original flashing and sealant around Mr-Glass openings has had 50-plus years to degrade. Water stains on interior block walls after a heavy rain almost always trace back to a failed perimeter seal, not the glass itself.
- Impact products without a current Miami-Dade NOA. Miami-Dade’s High Velocity Hurricane Zone rules require every roof, window, and shutter product to carry a valid NOA or product-control approval. Impact windows or shutters installed without one can get a permit rejected or an inspection failed mid-project, and out-of-county contractors get this wrong regularly.
- Failed shower enclosure seals and hardware. Frameless Mr-Glass shower enclosures in Westview bathrooms take a beating from humidity and daily use. Worn door sweeps, degraded silicone at the wall junctions, and mineral buildup on hinges all lead to water where it shouldn’t be.
Mr-Glass Service in Westview: What Local Conditions Mean for Your Equipment
Westview is a small, historically Black, working-class neighborhood in northwest Miami-Dade, not a new-build suburb, and that changes the work. The housing stock is dominated by mid-century concrete-block single-family homes built roughly from the 1950s through the 1970s, many with flat or low-slope roofs and additions tacked on piecemeal over the decades. For Mr-Glass owners here, the practical result is that window openings in these homes are frequently not square. Settling, old stucco patches, and decades of ad-hoc repairs mean a replacement unit that measures true on the bench won’t sit plumb in the wall without custom shimming and flashing details built to Miami-Dade HVHZ standards. Out-of-county contractors routinely skip that step because they’re used to newer framing. In Westview, skipping it is how you get a leak at the sill within two rainy seasons. It’s also why full replacement, not just a hardware swap, is sometimes the honest answer when a frame has gone out of true.
Mr-Glass Models & Products We Service in Westview
We work on the Mr-Glass Aluminum Series single-hung and sliding windows that are so common in mid-century Miami homes, along with the Mr-Glass Impact Windows line rated for HVHZ use with the proper Miami-Dade NOA. Frameless shower enclosures come up on nearly every bathroom remodel we scope in Westview, and Mr-Glass sliding glass doors show up on patio and entry applications, especially during room additions. We don’t claim local parts inventory. What we do is source the right part for the model and job: OEM Mr-Glass components for critical hardware, documented aftermarket equivalents where they meet HVHZ. Older or discontinued profiles sometimes need lead time, and we’ll tell you that upfront instead of guessing.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Westview

Here’s what Mr-Glass work in Westview typically runs, based on the same calibrated ranges we quote across the area:
| Service | Typical Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
What drives the number up or down: how many openings, whether the existing frames are square enough to reuse, whether your current windows carry a valid NOA (or need upgrading to hit HVHZ), and how much perimeter re-flashing the block walls require. A free estimate includes an on-site measurement of every opening, a check on the condition of existing frames and sealant, and a written line-item price you keep. Call (833) 510-5367 to set it up.
Serving Westview, FL – Our Local Coverage Area
We serve Westview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Westview
Yes, every impact window installed in Westview must carry a current Miami-Dade Notice of Acceptance or equivalent product-control approval. Westview sits inside the High Velocity Hurricane Zone, so an impact unit without a valid NOA can get your permit rejected or your inspection failed. We verify the approval on every unit before it goes in.
Often they can be repaired, but it depends on the frame. If the aluminum is still sound and only the rollers, locks, or glazing are compromised, we’ll recommend repair with OEM Mr-Glass parts and new perimeter sealant. If corrosion is extensive or the opening has gone out of square, full replacement makes more sense. In a typical Westview ranch home, a 1960s slider that won’t latch and shows interior water stains usually needs new rollers, re-flashing to HVHZ standards, and an upgrade to a compliant impact unit if the glass lacks a current NOA. Call (833) 510-5367 for an honest read on your windows.
Constant humidity speeds up wear on frameless shower hardware and silicone seals. Door sweeps degrade, mineral buildup stiffens hinges, and the silicone at the wall junctions lets go sooner than in drier climates. A worn seal lets water into the wall cavity, which is a real problem in block construction. Replacing the sweep and re-sealing is inexpensive; waiting isn’t.
Yes, and it’s one of the most common Mr-Glass applications during an addition. The key is ordering the door with the correct HVHZ rating and NOA for the opening size, and building the flashing into the new wall assembly rather than retrofitting it later. We coordinate that with the addition’s framing and stucco schedule so it’s done in the right sequence.
Window replacement in Westview runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000, depending on the number of openings and how much frame and flashing work each one needs. Call (833) 510-5367 for an exact quote; estimates are free.
Service Areas Near Westview
We serve Westview and the surrounding communities, including Westview service area, Coral Gables, Key Biscayne, Miami, Brownsville, and Miami Beach. If you’re working on Mr-Glass windows, doors, or shower enclosures in Pinewood or Gladeview, we can help there too. Learn more about our Mr-Glass service across the region.
Book Your Mr-Glass Service in Westview Today
Whether it’s a fogged impact unit, a leaking slider, or a frameless shower that needs re-sealing, we’ll give you a written price before any work starts and back the finished job with our 365-Day Done Right Promise. Call (833) 510-5367 to schedule your free estimate in Westview.
Written by the team at Bradford Remodeling Co Coral Gables.












