A Bradford company - serving Coral Gables, FL
A remodeled primary bathroom with a soaking tub and a walk-in shower
Moen · Coral Gables

Moen Windows & Doors in Coral Gables, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Coral Gables
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A galley kitchen opened up to the dining room with a new peninsula
A remodeled family room with new windows and a window seat
A wide opening with a new beam where the kitchen wall was removed
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Windows & Doors: The Coral Gables Owner’s Guide

Moen door hardware and window fittings in Coral Gables are installed by our crews as part of window replacement ($4,500 – $15,000) and impact window installation ($8,000 – $25,000), with hardware and locking-system swaps usually folded into the job rather than billed separately. We’re an independent service provider, not affiliated with Moen, and every job is quoted in writing before a tool comes out. Owners usually call us after a deadbolt starts grinding, a handle set works loose from the door slab, or a multi-point lock on a patio door stops catching the keeper. In Coral Gables, salt air off the bay and the afternoon humidity do most of the damage: finishes pit, internal lock mechanisms corrode, and screws backed into wood or fiber-cement door slabs loosen after a few wet seasons.

Call (833) 510-5367

Which Moen Models This Applies To

Moen door hardware covers entry handle sets, deadbolts, and multi-point locking systems for exterior and patio doors, sold in finish families rather than tidy numbered series like their faucets. The model number is usually stamped on the interior rosette or on a sticker inside the deadbolt housing; pull the thumb-turn and look at the plate behind it. Measure your door’s backset (the distance from the door edge to the center of the bore hole) and the cross-bore diameter before ordering anything. Most residential doors are a 2-3/8-inch or 2-3/4-inch backset, and a lock built for one won’t fit the other without re-boring the slab, which is a door-shop job, not a kitchen-table job. On fiber-cement and impact-rated doors common in Coral Gables, the internal reinforcement matters as much as the lock. OEM Moen parts match the original finish and fit exactly; a quality aftermarket equivalent can save money on a builder-grade lock but will rarely match a specialty finish, and on impact-rated door assemblies the hardware has to keep the door’s rating intact.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Windows & Doors Is Failing

Lock and hardware failures announce themselves well before the door stops closing. Here’s what we see most in Coral Gables homes:

  • The deadbolt grinds or sticks. Corrosion inside the lock body or a misaligned strike plate is the usual cause. In salt-air neighborhoods, the internal springs and pins pit faster than the finish shows.
  • The handle set wobbles. Backed-out screws or a stripped spindle. Left alone, the spindle shears and the handle comes off in your hand.
  • The door no longer latches cleanly. The door slab has swelled or shifted with humidity, throwing the lock out of alignment with the keeper. Coral Gables’ wet season moves wood doors more than most owners expect.
  • The key turns hard or won’t turn at all. A worn cylinder or debris in the pin chamber. This is a security issue, not just an annoyance, and it gets worse fast.
  • The multi-point lock won’t engage all points. On patio doors, a bent tie bar or a dropped door sash means only one of three locking points catches. That door is not secure, even if it looks shut.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A tile setter installing wall tile in a shower

Hardware and lock replacement in Coral Gables typically runs a few hundred dollars in labor plus the part, and it’s usually quoted as part of a larger door or window job. Here’s how the ranges stack up:

Work Installed Range
Handle set or deadbolt swap (single door) $150 – $450
Multi-point patio-door lock hardware $350 – $900
Window replacement (hardware and fittings included) $4,500 – $15,000
Impact window installation $8,000 – $25,000

What drives the range: the finish and grade of the hardware, whether the door needs re-boring, and whether the slab itself has to be adjusted so the new lock lines up. Every price is written before work starts. All completed work carries the 365-Day Done Right Promise: if the install fails within a year, we come back and correct it at no charge.

DIY or Call Us?

You can safely check a few things yourself: tighten visible screws on the handle set, test whether the deadbolt extends fully into the strike, and look for corrosion or pitting on the finish and inside the lock housing with a flashlight. What goes wrong on a DIY swap is the door slab itself. Re-boring a hole in the wrong spot weakens the door, and on impact-rated door assemblies, drilling or altering the hardware can void the rating that protects your home in a storm. A door that no longer closes square needs the slab adjusted, not a bigger lock. If the lock won’t turn, the multi-point system won’t catch, or the door has shifted, that’s when to call. Call (833) 510-5367 and a live person answers, day or night, to schedule your free estimate.

FAQs

A built-in window seat in a bay window

How long does Moen door hardware last in Coral Gables? Most entry hardware lasts 8 to 12 years inland, but in salt-air neighborhoods near the water, expect corrosion to cut that to 5 to 8 years. The finish is often the first thing to go, and the internal lock mechanism follows.

Can my Moen lock be repaired instead of replaced? Sometimes. A worn cylinder or a misaligned strike plate can often be corrected without a new lock. If the lock body is corroded or the spindle is stripped, replacement is the honest answer. Call (833) 510-5367 for an exact quote, and estimates are free.

How long does the swap take? A handle set or single deadbolt swap is typically an hour or two. A multi-point patio-door system or a job that requires adjusting the door slab takes longer, usually half a day.

How do you source the part? We work from a documented roster of name-brand materials and match the part to your door’s backset, bore size, and finish before ordering. Nothing is guessed. We also install KraftMaid, Cambria, and Silestone on other parts of the home.

If your Moen door hardware in Coral Gables has stopped doing its job, call (833) 510-5367 for a free estimate. You’ll get a written price before any work starts, background-checked and uniformed technicians, and a signed guarantee when we’re done. That’s The Garrison Standard, and it’s why homeowners call Bradford Remodeling Co Coral Gables.

Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A second-story addition that matches the existing rooflineA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawerA remodeled staircase with wood treads and a slim metal railing

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Coral Gables

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Coral Gables team

A local vetted partner works across Coral Gables and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 510-5367
Local Service Coverage

Request a Free Estimate in Coral Gables

Tell us what you need - Bradford Remodeling Co Coral Gables responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch