







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Home Additions & ADU: The Coral Gables Owner’s Guide
We build Moen-spec’d home additions and ADUs in Coral Gables, and a finished addition with a bathroom or kitchenette (where Moen fixtures belong) typically runs $45,000 – $130,000 as an installed project. That lead range is for the addition itself, not a fixture swap. Most Coral Gables owners don’t land on this page because a Moen part failed outright. They land here because they’re planning an addition and want the plumbing and fixtures specified correctly the first time, or because a Moen valve, cartridge, or trim they already own is failing on old masonry walls and they want to know what a proper replacement costs before they commit to a bigger build. We give the number in writing before any tool comes out.
Which Moen Models This Applies To

Moen’s residential line runs long: the 1222, 1225, and 1200 single-handle cartridge family, the Posi-Temp and Moentrol shower valves, the M-CORE 3 and 4 series, widespread and centerset lavatory faucets under the Chateau and Kingsley names, and the MotionSense and U by Moen lines that carry electronics. The most common Coral Gables compatibility gotcha is the valve body behind the wall, not the trim in front of it. A 1222 cartridge will not seat in a 1225 body, and the two look nearly identical on a parts shelf. The only reliable way to identify what you have is to read the stamped code on the valve body (visible once the trim plate is off) or match the cartridge’s brass stem length and O-ring position against the Moen spec sheet.
On the OEM-versus-aftermarket question: Moen branded cartridges are worth it for anything inside a wall you don’t want to open twice. For visible trim, drain assemblies, and supply lines, a quality aftermarket equivalent that meets the same spec is a reasonable call. We specify Moen, Kohler, KraftMaid, Cambria, and Silestone on our own projects so every spec is documented and traceable. We’re an independent contractor and not affiliated with Moen, so we source by part number, not by brand loyalty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Home Additions & ADU Is Failing
When a Moen fixture in a Coral Gables addition or ADU starts to go, the symptoms show up in a predictable order. Here’s what to watch for:
- Drip from the spout with the handle off. This is a worn cartridge seat, not a supply problem. In older Coral Gables homes on city water with higher mineral content, cartridges tend to fail at the 8-to-12-year mark. Our technicians have up to 22 years of experience and see this as the single most common Moen call.
- Squealing or grinding when you turn the handle. The cartridge has lost its lubrication or picked up grit. Left alone, it scores the valve body and turns a $200 fix into a wall-opening job.
- Inconsistent water temperature, especially in the shower. A Posi-Temp or Moentrol valve that won’t hold temperature usually has a failed pressure-balancing spool. Worth checking before you assume the water heater.
- Water weeping from behind the trim plate. The O-rings have failed and water is escaping into the wall cavity. Catch this early. On masonry construction common in Coral Gables, water finds a path to the framing fast in the summer humidity.
- Handle feels loose or reverses cold to hot. The cartridge was installed upside down or is the wrong model. Both happen more than they should when a part was matched by eye instead of by number.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fixture and valve work inside an addition or ADU is priced as part of the project, so here’s how it layers into the numbers:
| Item | Installed Range (Coral Gables) |
|---|---|
| Home addition (full scope) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
| Moen valve or cartridge replacement (part of project scope) | Quoted line-item, part plus labor |
What drives the range is scope: foundation and rough-in, whether a wet wall has to open, permit costs, and whether you’re converting existing square footage or adding it. We write every price before work starts, line-item, no change orders at the door. Every completed project carries the 365-Day Done Right Promise, in writing: if the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: shut off the supply, tape a towel under the valve, pop the trim plate, and read the code. That’s diagnosis, not repair. Where homeowner DIY goes wrong is going deeper. Opening the wall to swap a valve body, cutting into a shutoff that won’t seat, or pulling a cartridge from a corroded 30-year-old body that decides to shear off is how a $200 fix becomes a weekend with water on the floor. On masonry and stucco common to Coral Gables, we’re careful with any interior wall opening because the repair is more than a patch and paint.
If you’re adding an addition or ADU and want the Moen fixtures specified right the first time, or you have a failing valve you’d rather not touch, call (833) 510-5367. A live person answers, 24/7, and the estimate is free.
FAQs

How long does a Moen cartridge last in Florida? A Moen cartridge typically lasts 8 – 12 years here, shorter on harder-water lines and longer on softened water. Heat and mineral content in Coral Gables water are the two variables that shorten it most. Call (833) 510-5367 for an exact quote on a replacement, estimates are free.
Can a Moen valve be repaired instead of replaced? Usually yes. A cartridge or a pressure-balancing spool swap fixes most failures without opening the wall. Replacement of the whole valve is only necessary when the body is cracked or so scored it won’t seat a new cartridge. Call (833) 510-5367 to schedule a free estimate.
How long does the swap take? A cartridge replacement is typically an under-90-minute job once the water’s off. A valve body that requires opening the wall is a half-day to full-day job depending on what’s behind the finish. Call (833) 510-5367 for a written estimate before we start.
How do you source the part? We source by Moen part number against your specific valve code, matched to the OEM or a quality aftermarket equivalent depending on where the part lives. We don’t claim to stock parts or carry them on a truck, we order to the job so you get the right spec. Call (833) 510-5367 for a free estimate.
We work with a documented roster of premium brands, including Moen, KraftMaid, Cambria, and Silestone, so every specification is traceable. Bradford Remodeling Co Coral Gables is part of the Garrison Partners family and operates as an independently owned and operated business held to The Garrison Standard. That means a written price before any work, background-checked, uniformed technicians on every job, and a live person on the phone 24/7.
If you’re planning an addition or ADU in Coral Gables and want the plumbing and fixtures squared away from the start, or you have a Moen part that’s failing and want an honest number, call (833) 510-5367 for a free estimate. We’ll put it in writing before a single tool comes out.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












