







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Bathroom Remodeling: The Coral Gables Owner’s Guide
Moen-compatible bathroom remodeling in Coral Gables typically runs $9,000 – $28,000 installed, with the fixture-and-valve work quoted as a line item so you see exactly what the Moen portion costs. We install and replace Moen shower valves, trim, cartridges, and lavatory faucets as part of full bathroom remodels, and we give you the written price before anything starts. Most Coral Gables owners we meet didn’t go looking for a Moen guide at all. They went looking for one because the shower handle spins without changing temperature, or water keeps running after the handle is off, or a slow drip has been staining the tile grout for a month.
Which Moen Models This Applies To

Moen’s residential bathrooms fall into a few families, and the part you need depends on which one is on your wall. Posi-Temp is the single-handle pressure-balancing valve used in most Moen tub and shower installs since the late 1980s; Moentrol is the older two-handle-style pressure-balancing valve with a pull-out diverter, still common in Coral Gables homes built in the 1970s through the 1990s. On the faucet side, single-handle lavatory models (the Chateau, Kingsley, and Banbury lines show up often here) use a 1224 or 1255 cartridge family, while widespread two-handle faucets use ceramic-disc or compression cartridges.
Identifying yours takes two minutes. Pull the trim plate and photograph the brass valve body, including any stamped model number on its face. Measure the center-to-center spread of the faucet holes if it’s a lavatory (4-inch centerset vs. 8-inch widespread changes which cartridge you order). Moen also stamps a date code on the valve body; that code tells you which cartridge revision the valve shipped with, and it’s the detail that most often gets missed when an owner orders a replacement online and it doesn’t fit. On the OEM-versus-aftermarket question: Moen’s own cartridges carry a limited lifetime warranty against leaks and drips for the original purchaser, which is a real reason to use genuine parts. Quality aftermarket brass cartridges exist and can work, but if the part fails early you’ll have no manufacturer warranty behind it, only ours. For any bathroom remodel tied to this fixture work, we also spec KraftMaid and Wellborn cabinetry, plus Cambria and Silestone surfaces, when the vanity is part of the project. We are an independent service provider and are not affiliated with Moen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Bathroom Remodeling Is Failing
- The handle turns but temperature won’t change. The balancing spool or cartridge has failed or seized, so hot and cold no longer mix. Common after years of Coral Gables’ hard water leaves mineral scale inside the valve body.
- Water drips from the spout with the handle off. A worn cartridge seal lets water past the closed position. On a lavatory faucet this is usually the 1224 or 1255 cartridge; on a shower it’s the pressure-balancing cartridge.
- Water temperature swings when someone flushes a toilet. The pressure-balancing function has failed, which is a safety issue if it’s the shower, since a sudden hot spike can scald.
- Low flow from one fixture only. Scale or debris has built up in the cartridge or aerator screen. Coral Gables water runs mineral-heavy, and we see this on fixtures that haven’t been serviced in several years.
- Water pooling at the base of the trim plate or a soft spot in the wall behind it. A slow leak from the valve body or cartridge has been running behind the wall. This is the one that turns a cartridge swap into tile and substrate work.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Moen-related bathroom work runs in Coral Gables, installed, with the written price given before work begins:
| Work | Installed Range (Coral Gables) |
|---|---|
| Bathroom remodel (full scope) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What moves the range: whether the valve body behind the wall needs replacement or just the cartridge and trim, whether tile and substrate come off to reach it, and fixture grade. A cartridge swap is a small line item. A valve body replacement means opening the wall, so tile, backer board, and waterproofing come into play. We quote parts and labor separately so you can see the split. Every project is covered by the 365-Day Done Right Promise: a written full-year guarantee, and if the work fails inside that window we come back and correct it at no charge.
DIY or Call Us?
You can safely shut off the fixture’s water supply, photograph the valve body, read the stamped model and date codes, and confirm which Moen series you own. That’s useful homework. Where DIY goes wrong: pulling an old cartridge out of a seized valve body can crack the brass housing or leave the retention clip lodged inside, which turns a $30 part into a wall-opening repair. The bigger reason to call, though, is the water behind the wall. A leak you can’t see has usually been running for weeks, and once the shower valve gets opened, hidden rot shows up fast. We handle the diagnosis, source the correct Moen part for your exact valve, and quote the whole job in writing before we touch anything. Call (833) 510-5367 for a free estimate.
FAQs

Most Moen cartridges last 8 – 12 years, but in Coral Gables’ hard water we often see them fail sooner, in the 5 – 8 year range, because mineral scale wears the seals faster. If yours is out past that window and dripping, it’s overdue.
Usually yes. A cartridge and seal replacement fixes most drips and temperature problems without opening the wall. The valve body itself only needs replacing when it’s physically damaged, seized, or a leak has corroded it, which is when tile work gets involved.
A straightforward cartridge and trim replacement on an accessible valve is a same-day job, generally a couple of hours. If the wall has to open for a valve body replacement or a hidden leak, that’s a multi-day repair once tile and waterproofing are factored in.
We match the part to the stamped model and date code on your valve body, so you get the revision that actually fits, not a near-match. We order genuine Moen parts where the manufacturer warranty matters and quote the part as a line item on the written price.
Call (833) 510-5367 for a free estimate. A live person answers around the clock, and every Coral Gables project starts with a written price and a documented scope before a single tool comes out.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












