







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Home Additions & ADU: The Coral Gables Owner’s Guide
We build and install Mighty Buildings-compatible home additions and ADUs in Coral Gables, with a typical installed range of $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached ADU, quoted in writing before any work begins. These are planned builds, not emergency calls, so the schedule runs on engineering, permitting, and inspection rather than speed.
Owners usually find the problem in one of two ways. Either a panel joint on the Mighty Buildings shell starts showing a hairline separation after a wet summer, or the interior finish line at the wall-to-addition transition begins to telegraph through the drywall as the structure moves. In Coral Gables, that second pattern shows up fast because the humidity swings between our rainy season and our dry months push and pull at every seam in the envelope.
Key Takeaways
- Installed additions in Coral Gables run $45,000 – $130,000; ADUs run $90,000 – $220,000.
- We are an independent contractor and not affiliated with Mighty Buildings.
- Every price is written before work starts, and every completed project carries the 365-Day Done Right Promise.
- Panels, connectors, and envelope details must match the Mighty Buildings model and its stamped engineering.
Which Mighty Buildings Models This Applies To

Mighty Buildings builds with a 3D-printed panelized shell, and the connection details, panel joint profiles, and envelope sequence are specific to each model line. When we assess your addition or ADU in Coral Gables, the first thing we do is confirm the model designation from the stamped drawings and the panel labeling, because a connector spec that fits one shell thickness will not seat correctly on another. That’s the compatibility gotcha most owners hit: the panels look identical from the driveway, but the embed depth and the joint profile differ, and a mismatched fastener or sealant will fail early.
You can narrow it down before we arrive. Check the data plate or the structural drawings for the model name, then measure the visible panel thickness at an accessible edge and note the joint profile (flush, reveal, or stepped). Photograph the label. That set of three facts usually pins the right component without guesswork.
Then comes the OEM-versus-aftermarket call. For Mighty Buildings specifically, the structural connectors and the proprietary joint sealants should come from the manufacturer’s specified supply, because those parts carry the engineering sign-off and the warranty chain. For fasteners, flashing, and standard building products, a quality aftermarket equivalent matched to the spec is fine; the brand roster we work from includes James Hardie, Therma-Tru, GAF, and others with traceable specs. We document every substitution in writing, so there’s no ambiguity later. Since 2004, Bradford Remodeling has operated under The Garrison Standard, and part of what that means is a paper trail on every material that goes into your addition.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Home Additions & ADU Is Failing
Failures in a Mighty Buildings shell usually announce themselves through the envelope first, then the interior. Here’s what we look for.
- Hairline cracks or separation at panel joints. Movement at the joint transfers stress to the sealant, so it opens. In Coral Gables, the recurring cause is thermal and moisture cycling across a poorly detailed joint, not a defective panel.
- Water staining or efflorescence on the interior face of a wall. That points to a failed flashing or sealant detail letting our driving rain into the envelope. Left alone, it rots the substrate behind the finish.
- Telegraphing cracks along interior drywall seams. These show the structure is moving more than the finish can accommodate. It’s a connector or foundation issue more often than a drywall problem.
- Doors and windows that stick seasonally. Racking from a settled foundation or a shifted panel shows up as binding hardware. In our soil conditions, that’s worth a look before it spreads.
- Soft or spongy flooring near the addition perimeter. Moisture is getting under the finish through the base detail. This one is the most expensive if you wait, because the substrate is the first thing to go.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A home addition in Coral Gables runs $45,000 – $130,000 installed. A detached ADU runs $90,000 – $220,000. A garage conversion sits lower, at $30,000 – $80,000.
What moves you within that range: the size and footprint, whether the foundation is slab or elevated, the window package (impact-rated units run $8,000 – $25,000 on their own), and how much interior finish work the plan calls for. If the work touches an existing kitchen, cabinet installation ($4,000 – $13,000) or countertop work ($2,000 – $6,500) can fold into the scope.
Your written quote separates material from labor line by line, so you see exactly what the Mighty Buildings shell, the connectors, the envelope, and the finish each cost. That price doesn’t move at the door. Every completed addition carries the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge.
DIY or Call Us?
Some things you can check safely. Confirm the model label and photograph it. Measure the panel thickness and joint profile. Note where the staining or cracking starts and how far it runs. A visual inspection from the ground with no climbing and no prying is fine.
What you shouldn’t do is open a panel joint, reseal an envelope detail, or work at height to trace a flashing failure. These aren’t tripping hazards, they’re structural. A joint you open and reseal wrong lets water in behind the finish, and by the time you see the stain, the substrate is already damaged. Envelope and connector work is a trained-trade job, and the inspection part matters more than the repair part.
If something on that list matches what you’re seeing, call us at (833) 510-5367. We’ll look at it, tell you whether it’s a repair or a rebuild, and put the price in writing before we touch a tool.
FAQs

How long does a Mighty Buildings addition or ADU last? A properly detailed Mighty Buildings shell should last decades, but the envelope sealant and flashing are the wear components, and in South Florida’s humidity and sun they need inspection on a regular cycle. Plan on a joint-and-flashing review every few years so a small sealant failure doesn’t turn into substrate damage.
Can it be repaired instead of replaced? Often, yes. A failed sealant, a flashing detail, or a localized connector can usually be corrected without rebuilding the shell. We diagnose first and tell you honestly which one you’re looking at. Call (833) 510-5367 for an assessment and a written price.
How long does the work take? A repair to a joint or flashing detail is usually days. A full addition or ADU is weeks to months, driven by permitting and inspection timelines in Coral Gables. We give you the schedule in writing with the price.
How do you source the parts? We confirm your model against its stamped engineering drawings, order structural connectors and proprietary sealants from the manufacturer’s specified supply, and document any quality aftermarket equivalents in writing. Your quote lists every component, so nothing is a mystery when the crew arrives. Call (833) 510-5367 to schedule a free estimate.
Need a straight answer on your Mighty Buildings addition or ADU in Coral Gables? Call (833) 510-5367 for a free estimate. Every price is written before work starts, our technicians (up to 22 years of experience) are background-checked and uniformed, and a live person answers the phone around the clock. We also install KraftMaid, Cambria, and Silestone finishes where your plan calls for them. The Garrison Standard applies to every job, and that means squared away: clean site, documented scope, and a signed written guarantee in your hand at close.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












