







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Windows & Doors: The Coral Gables Owner’s Guide
We install and service Jerith windows & doors across Coral Gables, and most full unit replacements land between $4,500 – $15,000 installed, with impact-rated glass pushing toward $8,000 – $25,000. A trained technician can often verify the failing part and confirm the fix on a scheduled visit rather than leaving you guessing. Homeowners here usually discover the problem after a salt-heavy summer: a sash that won’t glide, condensation trapped between panes, or a door that suddenly needs a shoulder to close.
How much does a Jerith windows & doors replacement cost in Coral Gables?
Expect $4,500 – $15,000 for a standard Jerith-compatible window and door replacement in Coral Gables, and $8,000 – $25,000 when you step up to impact-rated units built for Florida wind zones. The low end covers a single fixed or sliding window with tempered or laminated glass and a standard frame. The high end reflects full impact glass, multiple openings, custom sizing to match your original Jerith stile profile, and trim restoration on older Coral Gables homes where the rough opening has shifted. We write the price before any work starts, and it doesn’t move at the door.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Which Jerith Models This Applies To
Jerith made its name in aluminum fencing and railing, and its window and door lines show up mostly as aluminum-framed sliders, casement units, and pool-enclosure doors on South Florida homes built from the 1970s through the 1990s. The tricky part is that Jerith’s aluminum profiles changed over the decades, so a “standard” replacement sash from a big-box catalog often won’t seat in an older frame. You identify the right part by pulling the manufacturer label from the door jamb or the interior head of the window track, then measuring the rough opening, the glass size, and the stile width down to the sixteenth. On Coral Gables homes near the Granada Boulevard corridor and the older streets off Ponce de Leon, we regularly see 1980s aluminum units with a 2-1/4-inch face that no current stock profile matches.
OEM versus aftermarket: when a Jerith-specific extrusion is still available, we spec it because the glass rebate and weep system line up exactly. When it isn’t, a quality aftermarket aluminum unit machined to the measured rough opening installs cleanly and carries its own manufacturer warranty. We’re an independent service provider, not affiliated with Jerith, so we source by measurement and spec rather than by logo. We also handle KraftMaid, Cambria, and Silestone on adjacent remodel work if your window project turns into a larger opening.
Signs Your Jerith Windows & Doors Is Failing
- Fogging or condensation between the panes. The sealed glass unit’s perimeter seal has failed, letting humid Coral Gables air in. Once moisture is trapped inside, the insulated glass unit has to be replaced; it won’t clear on its own.
- The sash drags or sticks in the track. Aluminum frames expand in summer heat, and worn rollers or a bent track cause the binding. Sometimes it’s a roller; sometimes the frame has racked out of square.
- Water staining or softness at the sill. Wind-driven rain is finding a path past a failed seal or weep hole. Left alone, it rots the substrate behind the frame, which turns a window swap into framing work.
- The door won’t latch without lifting. The hinge screws have pulled or the frame has settled, throwing the strike out of alignment. This is common on older Coral Gables pool doors that take full afternoon sun.
- Visible corrosion or pitting on the aluminum. Salt air eats the finish and eventually the frame itself. Pitting at the corners is the first sign the unit is near the end of its service life.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Coral Gables homeowners actually pay, installed:
| Scope | Installed Price Range |
|---|---|
| Window replacement (standard glass) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
What drives the range: impact-rated versus standard glass, the number of openings, whether the rough opening needs reframing, and how closely the new unit has to match the original Jerith profile. The price is parts plus labor, written line by line before we start. Every completed project carries our 365-Day Done Right Promise: if the install fails inside a full year, we come back and correct it at no charge. We pull permits and pass inspection where the scope requires it.
DIY or Call Us?
You can safely check a few things yourself: clean and lubricate the track, confirm the weep holes aren’t clogged, and measure the rough opening so you know what you’re dealing with. But window and door replacement on an upper floor, or on a unit set into stucco and framing, is where DIY goes wrong. A mis-set frame leaks, and in Coral Gables that leak shows up as rotted substrate months later. Impact glass is heavy, and dropping a sash from height is a real injury risk. If the glass seal has failed or the frame has racked, that’s a trained technician’s job. Call us at (833) 510-5367 and we’ll give you a written price before anything starts.
FAQs
A well-installed aluminum Jerith unit typically lasts 20 to 30 years, but the salt air and intense UV in Coral Gables often shorten the finish and seal life to 15 to 20. The glass seal usually goes before the frame does. Call (833) 510-5367 for an exact quote on a replacement; estimates are free.
Often yes. A failed roller, a misaligned strike, or a single fogged glass unit can be repaired without replacing the whole window or door. If the frame is corroded or racked out of square, replacement is the honest answer. We’ll tell you which one you’re looking at.
Most single window or door replacements finish in a few hours, and a multi-opening job runs one to two days depending on permitting and trim work. We confirm the schedule in writing before we start. Call (833) 510-5367 to schedule your free estimate.
We measure the rough opening, glass size, and stile profile, then source an exact-match OEM extrusion where it’s available or a quality aftermarket unit machined to spec where it isn’t. Every part carries its manufacturer warranty, backed by our own written guarantee.
If your Jerith windows & doors have a failing seal, a sticking sash, or a frame that’s seen one too many Coral Gables summers, we’ll put a written price in front of you before a single tool comes out. Our technicians have up to 22 years of experience, and every job is covered by the 365-Day Done Right Promise. Call (833) 510-5367 for a free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












