







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Bathroom Remodeling: The Coral Gables Owner’s Guide
Jerith-compatible bathroom components – vanity bases, shower surrounds, storage towers, and the door and drawer hardware that goes with them – are installed here in Coral Gables for a typical total project cost of $9,000 to $28,000, and replacing a single failed part usually runs well under that. If you need one part matched and set, call us and we’ll price it before anything moves.
Owners usually find the failure the same way. A vanity drawer sticks in the humidity and then the track gives out. A shower surround panel cracks along the seam where the original adhesive let go. A door pulls loose from a hinged cabinet base because the particleboard behind the screw has swollen from a slow leak. The part itself is rarely the whole story – the substrate behind it usually tells you more. Coral Gables homes hold moisture in a way inland houses don’t, and that shapes what fails first.
Which Jerith Models This Applies To

Jerith has built bathroom and storage components across several lines over the years, and the part that fits one generation usually won’t fit the next without modification. The earlier lines used thicker laminate over a heavier board base; later runs moved to a lighter panel with a different edge profile and a different hinge pattern. If you’re matching a vanity door, a shower surround panel, or a towel bar and hinge set, the year and line matter more than the color name.
Here’s how to identify what you have. Look for the manufacturer label on the back of a drawer box or the inside face of a cabinet side panel – it usually carries the model line and a production code. If the label is gone, measure the opening, the door thickness (typically in the 5/8 to 3/4 inch range on Jerith units), and the hinge cup bore, which is often 35mm on these cabinets. Photograph the hinge or drawer slide with the part number visible.
OEM versus aftermarket is the real decision. A genuine Jerith part guarantees a drop-in fit and matches on finish, but lead time and cost both climb. A quality aftermarket equivalent – a name-brand slide or hinge in the same bore pattern – often fits and holds up as well or better, and costs less. For a Coral Gables bathroom where the panel is sound and only the hardware failed, the aftermarket route is usually the honest one. For a surround panel where the color and seam profile must match, OEM is the safer call. We’re an independent service provider and not affiliated with Jerith; we source what fits, not what’s easiest to sell.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Bathroom Remodeling Is Failing
Each of these points to something specific behind the symptom. Fix the symptom and skip the cause, and the part fails again inside a season.
- Drawer slides that bind or grind. The rollers wear or the track picks up grit, and in a Coral Gables bathroom the humidity swells the wood box until the slide loses its tolerance. A slide that suddenly drags after a wet summer is the tell.
- A vanity door that won’t stay shut or hangs crooked. The hinge screws have pulled from swollen particleboard, or the hinge plate has bent. Left alone, the door skews and the hinge plates crack.
- A shower surround panel cracking at a seam or corner. The original adhesive or caulk has let go and water is getting behind the panel. A crack that widens in the wet season means the substrate is soft.
- Soft or swollen board behind a door pull or towel bar. A slow leak from the sink supply or a tub overflow has soaked the cabinet base. The screw won’t hold because the material around it has failed, not because the screw is bad.
- Peeling laminate at an edge or around a cutout. UV through a south-facing window and repeated moisture swings lift the laminate at the edges first. Once water reaches the board underneath, the panel delaminates from the inside out.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what a Jerith-compatible bathroom job runs in Coral Gables, priced the way we actually quote it – a written number before work starts, no moving parts at the door.
- Bathroom remodel (full): $9,000-$28,000
- Small bathroom remodel: $5,000-$12,000
- Shower replacement: $3,000-$8,500
- Tub-to-shower conversion: $3,500-$10,000
- Walk-in shower installation: $4,500-$12,000
- Bathroom vanity installation: $800-$3,000
What drives the range: whether the substrate behind the part is sound, whether the finish has to color-match an existing line, and whether the rough-in needs to move. A vanity swap on a dry wall is fast; a surround replacement where the wall board is soft is a different job, and we tell you which one you have before we quote. Parts and labor are line-itemed separately so you can see what the part costs and what setting it costs. Every completed project carries our 365-Day Done Right Promise – if the work fails inside that year, we return and correct it at no charge, in writing.
If you’re pairing a Jerith vanity with new surfaces, we also install Kohler and Moen fixtures, and work with KraftMaid, Cambria, and Silestone cabinetry and counters where the bath ties into a larger update.
DIY or Call Us?
Some of this is safe to check yourself. You can photograph the manufacturer label, measure a drawer opening and hinge bore, and note whether the board behind a loose pull is soft or firm. That saves time on the phone and helps us match the part.
Where DIY goes wrong: replacing a shower surround or setting a new vanity base means working around the water supply and drain rough-in, and a mis-set surround traps water behind the panel where you can’t see it. That’s a two-season problem in Coral Gables, not a two-week one. And if the board behind the part is swollen from a leak, screwing a new part over it just hides the failure. Our technicians have up to 22 years of experience and know the difference between a hardware swap and a wet-substrate repair. Call (833) 510-5367 and we’ll price it honestly before any tool comes out.
FAQs

How long does a Jerith bathroom component last? A properly set Jerith vanity or surround holds up for a decade or more in a dry, vented bath, but Coral Gables humidity shortens that where ventilation is poor. Running the exhaust fan and fixing leaks early adds years to the part.
Can the part be repaired instead of replaced? Often, yes. A binder slide, a hinge, or a caulk joint can be fixed without replacing the whole unit. A cracked surround panel or swollen cabinet base usually can’t be repaired well and should be replaced.
How long does the swap take? A hardware or vanity swap is typically a half-day to a full day. A surround replacement depends on whether the wall board behind it is sound, and we’ll tell you before we start. Call (833) 510-5367 for a free estimate.
How do you source the part? We match by label, model code, and measured fit, and we choose OEM or a quality aftermarket equivalent based on what actually holds up. We don’t carry parts on a truck; we source the right one for your unit and set it squared away. Call (833) 510-5367 to get your match started – estimates are free.
When you call Bradford Remodeling Co Coral Gables, a live person answers – day or night – and you’ll get a written price before any work begins, backed by our 365-Day Done Right Promise. Call (833) 510-5367 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












