







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Home Additions & ADU: The Coral Gables Owner’s Guide
Home additions and ADUs built with James Hardie siding in Coral Gables typically run $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, priced in writing before any work starts. James Hardie fiber cement is the right cladding for this climate: it holds paint far longer than wood or vinyl in South Florida’s salt air, humidity, and storm-season sun, and it doesn’t feed termites. Most Coral Gables owners don’t discover a problem with the building envelope until one of a few things shows up: paint blistering at the seams, a soft spot at the transition where the addition meets the original house, or moisture staining on interior drywall after a heavy rain. That’s when we get the call.
Which James Hardie Models This Applies To

James Hardie makes distinct product lines, and the right profile, thickness, and trim for your project depends on which one is on the existing house. The HZ10 line, including HardiePlank lap siding, HardiePanel vertical siding, HardieShingle, and HardieTrim boards, is engineered for hot, humid, coastal climates like Coral Gables and carries a manufacturer warranty that only stays valid when the installer follows James Hardie’s published fastening and clearance specs. The HZ5 line is rated for milder climates and is not the spec for a Coral Gables addition. Getting this right matters because an addition that doesn’t match the original cladding line looks patched and can void the warranty on the new material.
To identify what you have, check the back of a loose board or the printed stamp on the panel edge, and measure the exposed face width: HardiePlank comes in specific lap widths that have to match the original course for the addition to read as one house. On the OEM-versus-aftermarket question, James Hardie trim and siding components have limited aftermarket equivalents that meet the same spec. For a structural addition, we specify genuine James Hardie material and pull the manufacturer datasheet for the installer, so the warranty transfers to you. If your existing home has KraftMaid cabinetry, Cambria or Silestone surfaces being extended into a new kitchen wing, we coordinate those specs alongside the exterior cladding to keep the whole scope traceable.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your James Hardie Home Additions & ADU Is Failing
Fiber cement doesn’t rot like wood, but the assembly around it fails. These are the symptoms Coral Gables owners report most often, and what’s usually behind them.
- Paint blistering or peeling along lap seams: moisture is getting behind the board at the joint. In Coral Gables’s humid summers, paint that fails at the seam first is often a sign the caulk line or flashing detail at the addition roof transition has opened up.
- Soft or stained interior drywall after heavy rain: water is tracking through a gap where the addition ties into the original roofline or window head flashing. This is the most common envelope failure we see on additions, and it starts well before it shows inside.
- Termite tubes or frass along the base of the exterior wall: the fiber cement itself resists termites, but the wood framing and trim behind it don’t. A break in the siding system that exposes framing invites the problem.
- Green algae or dark streaking on north and east faces: fiber cement holds up to mold and mildew better than wood, but Coral Gables’s salt-laden air and shade still stain untreated surfaces. Heavy streaking often means the finish coat has worn thin and the board is absorbing moisture.
- Visible gaps at window and door openings: trim separation around openings is where wind-driven rain enters. In a hurricane-prone county like Miami-Dade, those gaps are also a weak point for wind uplift, not just water intrusion.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Coral Gables, James Hardie home additions and ADU construction price out at $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU. A garage conversion, the more modest path to an ADU on a Coral Gables lot, runs $30,000 – $80,000. The range is driven by square footage, whether the foundation and roof structure are new or existing, how the new envelope ties into the original house, and how much interior finish the project carries.
What that price includes: the substrate and framing, the James Hardie cladding and trim specified to your existing line, flashing and weather-barrier work at every transition, and the finish details that make the new construction read as original. We give you a written line-item price before any work begins, with no numbers that move at the door. Component figures are posted here for reference so the total is never a mystery. Every completed project is covered by the 365-Day Done Right Promise: if the work fails inside that window, we return and correct it at no charge. Bradford Remodeling Co Coral Gables is an independent contractor, not affiliated with James Hardie.
DIY or Call Us?
There are safe checks a homeowner can do. Look for paint blistering at seams, feel for soft framing around window and door openings, and check the interior ceiling below the addition roofline after a hard rain for staining. That tells you whether water is present.
Where DIY goes wrong on an addition envelope: tying new flashing into an existing roof-to-wall transition, setting the substrate and weather barrier correctly so water drains rather than traps, and matching James Hardie fastening and clearance specs. Get those wrong and you can void the manufacturer warranty on the new material and create a slow leak that doesn’t show for a season. For anything at the roofline or involving structural framing, this is a job for trained professionals. Call (833) 510-5367 and we’ll tell you what we find before recommending anything.
FAQs

James Hardie fiber cement in an HZ10-grade product is engineered for decades of service in hot, humid, coastal climates, and the manufacturer’s own warranty reflects that when it’s installed to spec. The reality in Coral Gables is that the siding itself outlasts the paint and the sealants around it, so plan on recaulking seams and repainting on a shorter cycle in our salt air and sun. The cladding is the durable part; the maintenance around it is what keeps it that way.
Often yes, especially when the problem is a flashing detail, a failed caulk line, or a localized section of siding rather than structural framing. We assess whether the substrate and framing behind the cladding are sound before recommending replacement. If a targeted repair will hold, we’ll price that; if the framing or roof transition is compromised, we’ll tell you plainly and show you why. Call (833) 510-5367 for a free estimate.
A garage conversion to ADU is the shortest path, an interior addition runs longer because it involves tying into the existing structure and envelope, and a full detached ADU is the longest of the three. Exact timeline depends on permit review through the city and the scope of foundation, framing, and finish work. We give you the schedule in writing with the price, and we don’t quote a date we can’t hold.
We specify genuine James Hardie HZ10 products matched to the line already on your house and pull the manufacturer datasheet for the specific profile and trim. This keeps the manufacturer warranty valid and makes the specs traceable on paper. We use a documented roster of name-brand materials across the whole job so nothing is left to guesswork.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












