







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Bathroom Remodeling: The Coral Gables Owner’s Guide
If you own a Coral Gables home with ES Windows impact-rated openings and you’re planning a bathroom remodel, the work falls into the $9,000 – $28,000 installed range here, with small bathrooms closer to $5,000 – $12,000 and full gut renovations at the top of the band. The window side of the job matters more than most contractors admit: ES Windows units are impact-rated to Miami-Dade and Broward product approval, so any bathroom reconfiguration that moves, resizes, or replaces one has to keep that approval intact. Call (833) 510-5367 to schedule your free, written estimate. Most Coral Gables owners we hear from don’t discover a problem until construction starts. The tile comes off a shower wall, a furring strip won’t hold new backer board against an ES Windows frame, or the glass slides fine but the adjacent wall shows moisture. That’s when the questions begin about what’s behind the window and how far the remodel can go.
Which ES Windows Models This Applies To
ES Windows makes impact-rated aluminum and vinyl products, and in Coral Gables bathrooms you’ll usually find horizontal sliders, single-hungs, and fixed picture units with laminated or insulated glass carrying a Miami-Dade NOA (Notice of Acceptance) label. You can identify your model two ways: the NOA or product approval sticker on the glass or jamb, and the etched safety glazing marking in a corner of the pane. Write both down before a contractor touches anything. That label tells us the exact product approval number, which determines what the replacement or reconfiguration has to match to stay code-compliant under the Florida Building Code. On the parts question: OEM ES Windows gaskets, weatherstripping, and balance assemblies are available through the manufacturer and its distributors, while quality aftermarket equivalents exist for common sizes. For a bathroom remodel, the “part” is usually the window’s rough opening, sill pan, and flashing integration into new tile or backer board. We’re an independent contractor and not affiliated with ES Windows, so we source OEM when the approval requires it and document any aftermarket substitution in writing before it goes in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Bathroom Remodeling Is Failing
Bathrooms sit in the wettest, most humid part of a Coral Gables house, and ES Windows units here take more abuse than a bedroom window ever will. Here’s what we see fail first:
- Water staining on the interior sill or jamb. The window’s flashing or sill pan wasn’t tied into the waterproofing correctly, so condensate and wind-driven rain track inside. In Coral Gables, this shows up as a chalky white bloom or dark streaks within a year or two of a remodel.
- Glass fogging between panes. The insulated glass seal has failed and moisture is trapped in the cavity. Common on older ES Windows units where the perimeter sealant has degraded in South Florida’s sun and salt air.
- A slider that drags or won’t latch square. The rollers or the track have worn, or the frame has deflected because the rough opening wasn’t shimmed and anchored to spec. A bathroom remodel that loads weight onto the frame can cause this.
- Loose or crumbling backer board around the window. The substrate behind the tile wasn’t moisture-rated or the transition from window frame to wall wasn’t sealed. This is the most common Coral Gables complaint after a builder-grade bathroom remodel.
- Gaskets and weatherstripping pulling away. The seal between sash and frame has dried out. Salt air and year-round humidity in Coral Gables shorten the life of these parts well below the national average.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Coral Gables bathroom remodel involving ES Windows-compatible window work, plan on these installed ranges. These are the same numbers we put in writing before any work starts, and they don’t move at the door.
| Scope | Installed Price Range (Coral Gables) |
|---|---|
| Full bathroom remodel (window integration included) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: window size and product approval requirements, whether the rough opening needs re-framing, tile and fixture grade (we work with Kohler and Moen fixtures and document every brand specification), and whether plumbing needs to be relocated. Every price is itemized in writing before a single tool comes out. All completed work carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge. We also work with KraftMaid, Cambria, and Silestone on the cabinetry and surface side of these jobs.
DIY or Call Us?
Here’s the honest split. You can safely check whether your ES Windows unit has a visible NOA label, measure the rough opening, and note any fogging, water staining, or a sash that won’t close. Photograph all of it. That information is genuinely useful and saves time on the estimate. Where DIY goes wrong: resealing a window frame that’s integrated into bathroom waterproofing, re-flashing a sill pan, or reframing a rough opening around an impact-rated unit. Those touch the building envelope and the product approval. Get the flashing or the tie-in wrong and you’re looking at mold in the substrate or a failed inspection, and the labor to redo it costs more than doing it right the first time. This isn’t electrical or high-tension work, but it is envelope work, and the Florida Building Code treats it that way. Call (833) 510-5367 and we’ll tell you honestly what needs a pro and what you can safely inspect yourself.
FAQs

Expect 15 – 20 years for the glass seal and frame on an ES Windows impact unit in South Florida, often shorter in a bathroom because of constant humidity. The gaskets and weatherstripping wear out faster, typically 7 – 10 years here. Call (833) 510-5367 for an exact assessment – estimates are free.
Often yes. If the glass is intact and the product approval is current, we can re-flash the sill, replace gaskets and rollers, and re-tie the frame into new waterproofing without pulling the whole unit. That saves real money. If the insulated seal has failed or the frame is deflected, replacement is the correct call. Call (833) 510-5367 and we’ll give you a straight answer in writing.
A single ES Windows unit replacement touches a few hours of window labor, but a full bathroom remodel around it runs one to three weeks depending on tile, plumbing, and whether the rough opening changes. We give you the schedule in writing up front so there are no surprises. Call (833) 510-5367 to schedule your free estimate.
Through the manufacturer and its distributors for OEM components, or a documented aftermarket equivalent where the product approval allows. We don’t keep parts in stock and don’t carry them on a truck; we order to your specific model and approval number so the right part arrives for the right unit. Every substitution is documented in your written scope before installation. Call (833) 510-5367 to get your estimate on the books.
If you’re in Coral Gables and a bathroom remodel is on your list, the place to start is a written price and a clear scope, not a handshake. We answer the phone live, 24 hours a day, and you’ll get a documented, itemized estimate that doesn’t move once work begins, backed by the 365-Day Done Right Promise and a crew whose identities are checked before they walk through your door. Call (833) 510-5367 to schedule your free estimate with Bradford Remodeling Co Coral Gables.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












