







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Coral Gables Homeowners Choose ECO Window Systems Construction
Bradford Remodeling Co Coral Gables provides independent ECO Window Systems construction service in Coral Gables – installation, repair and replacement of ECO impact windows, sliding glass doors, French doors and mulled window-and-door assemblies. What makes our ECO Window Systems work different is field-level familiarity with how these Miami-Dade NOA-rated assemblies actually get sealed, flashed and set into masonry, and what happens when they don’t. We are an independent trade partner. We are not authorized, endorsed or warranted by ECO Window Systems.
Coral Gables is one of the few cities in the country running its own full-service building department alongside a Board of Architects that reviews exterior work across most of the city. A window replacement here isn’t a Saturday job. It’s a design-review submission, a product approval paper trail, and a crew that knows how a barrel-tile roof plane ties into a new slider header without opening a leak. That combination is where most out-of-town installers come apart.
Call (833) 510-5367 and a live person answers, any hour, every day.
Why Trust Bradford Remodeling Co Coral Gables for Your ECO Window Systems Construction?

Our technicians have up to 22 years of experience, and a good share of that time has been spent on ECO Window Systems impact products in South Florida heat, salt air and hurricane-season rain. We know the aluminum series single-hung and casement frames, the heavy multi-panel sliders, the fixed and picture units, and the French and hinged entry systems – and we know which parts on each tend to fail first.
We work from OEM and OEM-spec components: rollers, locks, handles, weatherstrip and glazing seals sourced to preserve the assembly’s rating rather than undercut it. Where ECO OEM parts are discontinued, we say so up front and quote a rated aftermarket equivalent matched to profile and hardware, in writing, before anything is ordered.
Every project carries a written price before work starts and the 365-Day Done Right Promise – if the work fails within a full year, we return and correct it at no charge. Background-checked, uniformed technicians arrive on every job, so you know who is at your door before the crew shows up. That’s The Garrison Standard, and it applies to a $400 repair the same way it applies to a $25,000 impact window install.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ECO Window Systems Construction Problems We Fix in Coral Gables
Most of what we’re called out for on ECO Window Systems products isn’t glass failure. It’s the envelope around the glass. Here’s what actually goes wrong in Coral Gables homes.
- Failed perimeter sealant at the frame-to-masonry joint. On 1920s-40s Mediterranean Revival walls, the joint between an ECO frame and old coral rock or coquina masonry moves with heat and settles over time. When the sealant ages out, wind-driven rain pushes past the buck and into the wall cavity. Homeowners see the stain on interior drywall months later and blame the window.
- Water intrusion at mulled units and door thresholds. Mulled window-and-door combinations and impact slider thresholds leak when the sill pan or end-dam was omitted or improperly lapped at install. This is the single most common cause of a “leaking ECO slider” call, and it’s a flashing problem, not a product defect.
- Roller and track wear on heavy multi-panel impact sliders. Large lanai sliders carry real weight. Worn rollers make panels drag, jump track, or stop short of full lock – which matters during a storm warning, not after. Salt air from nearby Biscayne Bay accelerates the corrosion that starts the wear cycle.
- Glass seal failure and fogging in older impact insulated units. When the perimeter seal of an insulated glass unit fails, moisture gets between the panes and the unit fogs. It’s cosmetic at first and a performance loss later. In some cases the glass unit is replaced; in others the whole assembly is the honest answer.
- Screen and hardware corrosion from salt air and UV. Handles, locks, screen frames and exposed fasteners take a beating under intense South Florida UV and salt exposure. Corroded locks that won’t throw fully are a security issue and a code issue at the same time.
ECO Window Systems Parts & Our Repair-vs-Replace Approach

We don’t stock parts locally. Every ECO Window Systems job starts with an on-site diagnosis that identifies the exact series, the hardware profile and what has actually failed, and parts are then sourced per job – OEM where available, OEM-spec rated aftermarket where the original is discontinued. We tell you which path we’re taking and why, in writing, before we order.
The repair-or-replace call is where a lot of contractors get dishonest, because replacement pays better. Our rule is simple: if the frame, the glass unit or the structural connection has failed, replacement of that unit is the more honest answer. If the failure is sealant, flashing, rollers, locks or weatherstrip, a rated repair preserves the assembly’s original rating and saves you real money.
Call (833) 510-5367 for a written estimate – it’s free, and it tells you which category your job falls into.
Our ECO Window Systems Service Process – Step by Step
- 1
Diagnosis. We identify the ECO Window Systems series, inspect the perimeter seal, sill pan, flashing and buck, and water-test where intrusion is suspected. No guesswork, no parts ordered on a hunch.
- 2
Written scope and price. Line-item pricing in your hand before any work starts – materials, labor and permit costs separated so you can see what you’re paying for.
- 3
Repair or install. OEM or OEM-spec parts, corrosion-resistant fasteners, and flashing installed to current wind-driven-rain detail – not the detail that was common twenty years ago.
- 4
Test and verify. Panels seat and latch to full lock, doors swing and close true, and the opening is water-tested before trim goes back on.
- 5
Warranty handoff. Clean site, documented scope, and your signed 365-Day Done Right Promise in your hand at close. If the work fails inside that year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterECO Window Systems Products We Service & Install in Coral Gables
We service and install the full ECO Window Systems impact family as it’s used in Coral Gables homes: large multi-panel impact sliding glass doors for lanai and patio openings, impact single-hung and casement windows in the aluminum series, fixed and picture impact windows, mulled window-and-door combinations, and impact French doors and hinged entry door systems. We also handle the roof plane work that often pairs with a window or door replacement – tile roof repair and roof repair where a new header or opening disturbs the tile field. Coral Gables’ original clay barrel-tile roofs need careful handling at those penetrations.
We Also Service These Brands
Bradford Remodeling Co Coral Gables is a multi-brand contractor, not a single-brand shop. Alongside ECO Window Systems work, we install and service KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, and we work with a documented roster of premium brands that includes GAF, James Hardie and Therma-Tru. If your project touches windows, doors, roof, kitchen or bath, one written scope can cover it.
FAQs – ECO Window Systems Construction Service in Coral Gables

No. We are an independent ECO Window Systems service provider. We are not affiliated with, authorized, endorsed or warranted by ECO Window Systems, and we say so plainly. What we do bring is field experience with these Miami-Dade NOA-rated assemblies, warranty-safe service practices, and a written price and 365-Day Done Right Promise on every job.
Yes, wherever OEM parts are available. We source ECO OEM rollers, locks, handles, weatherstrip and glazing seals to preserve the assembly’s rating. Where the original part is discontinued, we quote a rated aftermarket equivalent matched to profile and hardware, and we tell you that’s what we’re doing before we order it. Call (833) 510-5367 for a written estimate.
Usually, yes. Most ECO impact slider leaks trace back to a degraded perimeter seal or a sill pan that was never properly lapped – not to the glass or the frame. In those cases we pull the interior trim, inspect the buck and flashing, re-flash and re-seal the opening to current wind-driven-rain detail, replace worn rollers and locks so panels seat fully, and water-test before closing up. If the frame or glass unit itself has failed, we’ll tell you that too, because replacement is sometimes the more honest answer.
It depends on the assembly. Fogging means the perimeter seal of the insulated glass unit has failed and moisture is between the panes. On some ECO units the glass can be replaced while keeping the frame and preserving the rating; on others the unit is designed as a sealed assembly and replacement of the whole unit is the correct path. We diagnose on site and put the answer in writing with a line-item price before you commit.
Significantly, and locals plan for it while out-of-town crews get blindsided. Coral Gables runs its own full-service building department and a Board of Architects that reviews exterior work across most of the city, so a window or door replacement often needs Board review on top of the standard permit – and that can add 60 to 90 days to a job. Product approvals have to line up too: Miami-Dade’s High-Velocity Hurricane Zone product approvals matter here, and Mediterranean-Revival-compatible materials matter on many homes. Permits pulled and inspections passed is part of our written scope, not an afterthought.
Any new opening that touches the roof plane needs its flashing and tile field detailed back correctly – Coral Gables has a lot of original clay barrel-tile roofs where a careless header cut turns into a leak. We commonly pair ECO window and door work with tile roof repair, roof repair, or in the worst cases roof replacement. Impact Window Installation runs $8,000-$25,000, Window Replacement $4,500-$15,000, Roof Repair $400-$1,800, Tile Roof Repair $600-$2,500, and Roof Replacement $8,000-$20,000 in Coral Gables. Call (833) 510-5367 for an exact quote – estimates are free.
Here are the market ranges we work to in Coral Gables, and we give you a written price before any work starts:
| Service | Price Range in Coral Gables |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
| Tile Roof Repair | $600 – $2,500 |
| Roof Replacement | $8,000 – $20,000 |
These ranges reflect Coral Gables market pricing, including the local permit and Board review costs that a job here carries. Call (833) 510-5367 for an exact quote on your ECO Window Systems project – estimates are free.
Book Your ECO Window Systems Service in Coral Gables, FL
Whether it’s a leaking impact slider, fogging glass, worn rollers or a full impact window package tied into a roof repair, Bradford Remodeling Co Coral Gables gives you a written price before work starts and a signed 365-Day Done Right Promise at close. Call (833) 510-5367 for a free estimate. A live person answers, every hour, every day.
Written by the team at Bradford Remodeling Co Coral Gables.












