







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Roofing: The Coral Gables Owner’s Guide
If your ECO Window Systems roof or roof-mounted window system is leaking, holding water, or showing storm damage, we handle the repair: roof repairs in Coral Gables run $400 to $1,800 for localized fixes, and a full replacement runs $8,000 to $20,000 installed. Metal roof installation, which some ECO Window Systems assemblies pair with, runs $15,000 to $40,000. Tile roof repair, common across Coral Gables’ Mediterranean-style homes, runs $600 to $2,500.
Owners usually find the problem the same way: a brown ring spreading across a ceiling after an afternoon downpour, water beading at a window frame where the roof meets the wall, or granules collecting in the gutter after a windy week. Coral Gables sits in a high-wind, high-humidity zone, and that climate works roofing components harder than most of the country. When a flashing detail or a seal fails, the failure shows up fast. Our technicians have up to 22 years of experience with exactly this kind of work, and every job we take on gets a written price before a tool comes out.
Key Takeaways
- Roof repair in Coral Gables: $400 – $1,800. Replacement: $8,000 – $20,000.
- Water intrusion near an ECO Window Systems window-wall or roof transition is the most common failure we see.
- We’re an independent contractor, not affiliated with ECO Window Systems.
- Every completed job is covered by the 365-Day Done Right Promise.
Which ECO Window Systems Models This Applies To

ECO Window Systems is best known for impact-rated windows and sliding glass doors, and the roofing connection matters most when those products sit inside a roof-integrated assembly: a low-slope roof over a sunroom, a window-wall that ties into the roofline, or a skylight or clerestory window set into the roof plane. On those installs, the failure point is rarely the glass. It’s the flashing, the sealant joint, or the substrate where the window frame meets the roof deck.
Identifying your exact assembly starts with the data plate. Look for the product label on the window or door frame, usually a sticker or etched plate on the jamb, and note the model and series number along with the glass make-up. Measure the rough opening and the frame depth. That combination is what tells us whether a replacement flashing kit or a compatible aftermarket seal system will match your existing assembly.
On the OEM-versus-aftermarket decision: for structural flashing and frame components, OEM keeps the original engineered tolerances intact, which matters under Florida wind-load rules. For sealants, fasteners, and gaskets, a quality aftermarket equivalent from a documented manufacturer often performs as well or better, especially in our UV and salt-air conditions. We’ll lay out both options and the price of each in writing so you can choose. We also install and repair KraftMaid, Cambria, and Silestone products on interior work that ties into the same home.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Roofing Is Failing
- Water staining on ceilings or walls near the window line. The seal or flashing at the roof-to-window transition has opened, letting wind-driven rain push in. Coral Gables afternoon storms find that gap quickly.
- Peeling or cracked sealant around the frame. UV exposure and heat break down exterior sealant over time, and once it loses flexibility, it stops shedding water. This is the single most common failure point we correct.
- Loose or lifted flashing. Fasteners back out or the metal pulls away from the substrate after wind events, which lets water travel under the edge instead of over it.
- Water ponding on a low-slope section. Standing water on a flat or low-slope roof over a window assembly stresses every seam and accelerates deterioration. Drainage, not just the membrane, is often the culprit.
- Granule loss or blistering on shingles above the opening. Heavy sun and heat age shingles faster here than in cooler climates, and blisters or bald spots signal the surface is near the end of its life.
Replacement Cost & What’s Included

Here’s the price structure in Coral Gables, with real numbers so you can plan:
- Roof repair (localized, flashing, seal, or leak correction): $400 – $1,800
- Tile roof repair: $600 – $2,500
- Roof replacement: $8,000 – $20,000
- Metal roof installation: $15,000 – $40,000
What moves the range: roof size and pitch, the material you choose, how much deck or substrate repair is needed underneath, and whether the window-to-roof transition has to be rebuilt or just resealed. A single flashing detail is at the low end. A full tear-off with new underlayment and rebuilt transitions lands higher. Every quote breaks out materials and labor as line items, in writing, before we start. The price you sign is the price you pay. And every completed repair or replacement carries the 365-Day Done Right Promise: if it fails within a year, we come back and correct it at no charge to you.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things you can safely check yourself. Look for staining inside after a storm. Eyeball the sealant around the window frame for cracks or gaps. Clear debris from gutters and roof drains so water can move off the roof. Photograph anything that looks wrong.
Roof work itself is where DIY goes wrong, and it’s a real fall hazard, not a minor risk. Climbing a wet, sloped roof in South Florida heat to reseal a flashing detail or replace a shingle is how homeowners get hurt. The repair also requires knowing how wind-driven rain behaves at a transition, which is a skill, not a guess. We’d rather you leave the ladder down and let us handle it. Our technicians are background-checked and uniformed, so you know who’s on your property. Call us and we’ll put a written price in your hands before anything starts.
Frequently Asked Questions

Sealant joints and flashing details typically last 5 to 10 years in South Florida’s UV and storm exposure before they need maintenance, while a full roof covering may run 15 to 25 years depending on material and upkeep. Salt air and heavy sun shorten those windows compared with milder climates. Call (833) 510-5367 for an exact assessment and free estimate.
Usually, yes. A localized leak, a failed sealant joint, or a lifted flashing is a repair in the $400 to $1,800 range, not a replacement. We only recommend replacement when the deck or covering is past its useful life. Call (833) 510-5367 and we’ll tell you honestly which one you need, in writing.
A targeted repair is often a single visit, while a replacement runs several days depending on roof size and material. We schedule around weather, which matters in Coral Gables. Call (833) 510-5367 to get a realistic timeline and a fixed written price.
We start from your data plate and measurements, then match flashing, seal, and frame components to your exact series, offering OEM or a quality aftermarket equivalent with the spec and price of each. We’re an independent contractor, not affiliated with ECO Window Systems, so every option is spelled out for you to choose. Call (833) 510-5367 for a free estimate.
Get Your ECO Window Systems Roofing Squared Away
If water is finding its way in around your ECO Window Systems roof or window-wall assembly, the fix starts with a real diagnosis and a written number. Bradford Remodeling Co Coral Gables gives you a fixed price before work begins, background-checked and uniformed technicians, and the 365-Day Done Right Promise on every completed job. A live person answers our phone 24/7, ready to talk through your Coral Gables project. Call (833) 510-5367 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












