







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Fence Installation: The Coral Gables Owner’s Guide
Dvele-compatible fence installation in Coral Gables runs $3,500 – $9,000 installed for a typical residential run, priced in writing before we touch a post. That range covers standard vinyl privacy fencing; your number depends on linear feet, gate count, and how Coral Gables soil and grade treat the existing footings. Owners usually end up on this page the same way: a windstorm bends a panel out of line, the gate drags on the track, or a post leans after a rainy season. You can see the damage, but matching a replacement section to a Dvele layout is where it gets tricky, because Dvele’s fence assemblies use their own post spacing and panel profiles, not a universal hardware pattern.
Which Dvele Models This Applies To

Dvele builds modular homes, and their fencing is quoted as a per-model specification rather than shelf stock. If your plan set lists a “privacy fence package” or similar line item, the panel profile and post spacing are locked to that model’s site plan. Start by finding two things: the model designation (usually a plan set or a spec sheet left on-site) and a physical measurement of your existing panel width and post spacing, taken from inside face to inside face. Those measurements trump any label, because site adjustments get made during install and never recorded on paper.
On the OEM-vs-aftermarket question: Dvele does not sell fencing components direct to homeowners, so genuine replacement parts have to be sourced through them or a licensed dealer, and lead times run long. Quality aftermarket equivalents in the same profile do exist, and for a straight panel or a post replacement they perform identically. Where the match matters is the interlocking method and the top-rail cap profile, which are what Dvele specifies per model. Get those two dimensions wrong and the new section argues with the old one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Fence Installation Is Failing
- Posts leaning after a storm. Coral Gables sits on limestone-inflected soil, and when the original set used concrete that didn’t cure against a shallow footing, the post creeps. A lean that resets itself after you let go isn’t structural yet; one that stays is.
- Gate sagging and dragging. The hinge-side post absorbs the whole gate swing. If the gate has gone from level to scraping the ground within a couple of seasons, the post has shifted, not the hinge.
- Panels staying wet at the bottom. Poor drainage under the fence line holds water against the panel edge, and in South Florida’s humidity, a panel that never dries between rains loses its finish fast.
- Loose rail caps or rattling panels. Fasteners that pull out of the post mean the attach point, not the fastener, is failing. Tightening the screw again never fixes it.
- Cracks radiating from a fence-line post. Hairline cracks along the top of a footing usually mean the concrete was mixed wet. They widen with each wet season and show up first at gates.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Expect $3,500 – $9,000 installed for Dvele-compatible fence work in Coral Gables. What moves the number:
- Linear footage and panel count
- Gate count and hinge hardware
- Footing replacement on any post that’s failed
- Grade or trim work where the line runs downhill
What’s included in the written price: materials, labor, footing demo where needed, and haul-away. We give you the range in dollars before any work starts, and that number doesn’t move at the door. All finished work carries the 365-Day Done Right Promise: if the install fails inside a full year, we come back and correct it at no charge. We write the guarantee into the contract you sign, not a brochure you lose.
DIY or Call Us?
Some of this is safe to check yourself. Walk the line and probe each post for movement, look for footing cracks, and measure your panel and post spacing so you know what you’re matching. That’s all inspection, no tools needed.
Trenching and setting a new post over a failed one is where owners get into trouble. A post that looks stable can need a footing pulled entirely, and digging next to an existing panel without shoring it risks a panel dropping on you or the whole run shifting further. We use documented post-and-panel systems set to manufacturer specs, and our technicians have up to 22 years of experience reading which footings are gone and which just need reset. Bradford Remodeling Co Coral Gables is an independent service provider, not affiliated with Dvele. If you want an honest look, call us at (833) 510-5367.
FAQs

A properly installed vinyl privacy fence will hold 15 to 20 years in South Florida when footings are set correctly, but sun exposure and the wet-dry cycle shorten that fast for anything under-engineered. If your existing run is leaning or cracking at 6 to 8 years, footings are the culprit, not the material. Call (833) 510-5367 for an exact quote on what needs replacing.
Often yes, and it’s the cheaper answer. A single panel, gate, or post can be swapped without touching the rest of the run, as long as the remaining posts are sound. If more than 20 to 30 percent of the footings have moved, patching costs more over two seasons than replacing. Call (833) 510-5367 for a look.
A single panel or gate replacement is a few hours on-site; a full run with new footings runs one to three days depending on length and how much concrete has to be broken out. We schedule with the written price in hand before the first post goes in. Call (833) 510-5367 to get a date.
We measure first, then match against Dvele’s per-model specification, and use OEM hardware where it’s available or a documented aftermarket match in the same profile where OEM lead times are too long. You get the spec in writing, so you know exactly what’s going in the ground. Call (833) 510-5367 for a free estimate.
We also install fencing and exterior work matching a range of premium building products, including fixtures and surfaces from KraftMaid, Cambria, and Silestone when the project calls for them. Call us at (833) 510-5367 to schedule your free estimate and get the Coral Gables install squared away.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












