







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Bathroom Remodeling: The Coral Gables Owner’s Guide
Dvele bathroom remodeling in Coral Gables runs $9,000 to $28,000 installed, depending on the amount of wet-wall work, the fixtures and surfaces you choose, and whether the floor and shower pan have to come up. We handle the whole scope: demo, plumbing and electrical rough-in, waterproofing, tile, vanity, and fixtures. Most Coral Gables bathrooms take a few weeks of scheduled work, not a single day, and we plan the sequence with you before anything is ordered.
Dvele is a modular construction brand, which shapes how a bathroom remodel goes. Their homes arrive with a set frame and wall system, and their bathrooms were built to the module’s tolerances, not to standard site-built dimensions. Owners usually find this out the hard way: a vanity or shower base ordered off the shelf doesn’t sit right, a tile backer hides an interior wall that isn’t framed like a stick-built house, or a fixture that failed turns out to be spec’d to a size the local big-box aisles don’t stock. That’s where we come in, and it’s why the first thing we do on a Dvele bathroom is measure and document, not order.
Key Takeaways
- Installed Dvele bathroom remodeling in Coral Gables: $9,000 to $28,000. Small bathrooms run $5,000 to $12,000.
- Dvele bathrooms are built to module tolerances, so off-the-shelf parts often don’t fit. Measure and document first.
- We’re an independent contractor, not affiliated with Dvele. We work with Dvele owners, we don’t represent the brand.
- Every project gets a written price before work begins and the 365-Day Done Right Promise on the finish.
Which Dvele Models This Applies To

Dvele has built a range of modular lines over the years, and the interior turnkey finish varies by model and by the year it was set. There isn’t one universal “Dvele bathroom” spec, and anyone who tells you there is hasn’t worked on one. What we do is read the module, not guess at it: the interior wall framing, the wet-wall thickness, the rough-in locations for the shower valve and drain, and the finish tolerances baked into how the module was assembled.
Here’s how we identify what you actually have before ordering anything:
- Measure the rough opening for the vanity, shower base, and any recessed niches. Dvele module tolerances can land a half-inch to an inch off from standard site-built, and that difference is the whole game.
- Check the wet-wall construction. Some Dvele bathrooms use a panelized wall system behind the tile. That changes how a new valve gets mounted and how we waterproof.
- Mark the rough-in centers for the shower valve, drain, and supply lines. A same-size replacement fixture may not align with the existing rough-in even if the surface looks identical.
On the OEM-versus-aftermarket question for Dvele specifically: the original fixtures that came with your module may be discontinued or only available through the modular supply chain. A quality aftermarket fixture from a documented brand – Kohler or Moen for the valve and trim, for example – is often the more traceable and better-supported choice, with a manufacturer warranty that backs our own 365-Day Done Right Promise. We work with a documented roster of name-brand materials, including KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler and Moen fixtures, so every spec is written down.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Bathroom Remodeling Is Failing
In Coral Gables, the humidity and the daily temperature swing between a conditioned module and a vented bathroom do a number on older finishes. Here’s what a failing Dvele bathroom typically looks like, and what’s usually behind it:
- Grout lines cracking along the shower walls. This is usually movement in the panelized wall behind the tile, or a waterproofing layer that’s past its service life. Cracking grout lets moisture in, and in a Coral Gables bathroom that moisture has nowhere to go.
- Tile lifting or sounding hollow. A hollow thud underfoot or on the wall usually means the thinset bond failed, often because the substrate wasn’t prepped to the module’s tolerances. Once tile lifts, the waterproofing behind it is compromised.
- Mildew that keeps coming back at the shower base. Recurring mold at the base and corners points to a shower pan or caulk joint that isn’t holding water out. Cleaning it doesn’t fix the source.
- A vanity that’s pulling away from the wall or sagging. Modular walls can be thinner than site-built framing, so the mounting can work loose over time. A sagging vanity is a mounting failure, not just tired doors.
- Fogged or leaking fixtures and peeling finish on the valve trim. The cartridge, seals, or finish on the original fixture have aged out. A leaking valve behind the wall is the one you want to catch early.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Coral Gables, Dvele bathroom remodeling runs $9,000 to $28,000 installed. A small bathroom remodel lands at $5,000 to $12,000. Here’s how the line items break down so you can see what drives the range:
| Scope | Installed range |
|---|---|
| Full Dvele bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
The range moves on three things: how much of the wet wall comes apart, whether the shower pan and floor have to be rebuilt, and the finish tier you choose. We give you a written price before any work starts, with the parts and labor broken out line by line, so there’s no number that changes at the door. Every project is covered by the 365-Day Done Right Promise: if the work fails within a full year of completion, we come back and correct it at no charge.
DIY or Call Us?
Some of this you can check safely yourself. You can measure the rough opening for a vanity, look for cracked grout and hollow-sounding tile, test the shower valve for drips, and note whether the caulk at the base is holding. That homework is genuinely useful, and it helps us quote faster.
Where DIY goes wrong on a Dvele bathroom is once you’re behind the wall or into the waterproofing. Replacing a shower valve cartridge or a rough-in means shutting the water and opening the wet wall, and getting the waterproofing back to spec afterward is where most homeowner attempts fail and where a small leak turns into a much larger repair. Pulling the shower pan or redoing the substrate is a full demolition-and-rebuild job, and if the waterproofing underneath isn’t done to standard, the tile on top won’t last. That’s not a place to save a few dollars.
If you’ve measured and you’re not sure what’s behind the wall, call (833) 510-5367. A live person answers, day or night, and we’ll walk you through what the reading tells us before we quote anything.
FAQs

How long does a Dvele bathroom remodel take? A full Dvele bathroom remodel typically runs a few weeks of scheduled work; a swap like a vanity or shower replacement takes day-scale time, not a single same-day visit. We lay out the sequence up front so you know what happens when. Call (833) 510-5367 for a scope-based timeline.
Can this be repaired instead of fully replaced? Often, yes. Cracked grout, a leaking valve cartridge, or a vanity mounting that’s worked loose can be repaired without a full remodel. Once tile lifts or the shower pan fails, replacement is usually the honest answer. We tell you which one you’re looking at after we measure.
How long should a Dvele bathroom finish last? A properly installed tile-and-waterproofing bathroom should hold for a decade or more in Coral Gables conditions, provided the wet wall and waterproofing are done right. The humidity here is unforgiving of shortcuts, so the waterproofing layer matters more than the tile on top. Our 365-Day Done Right Promise covers the work for a full year.
How do you source the part or fixtures? We spec against the module’s actual measurements and work from a documented roster of name-brand materials – KraftMaid and Wellborn cabinetry, Cambria and Silestone, Kohler and Moen, among others – so every component has a traceable manufacturer spec and warranty. We don’t claim to carry parts on a truck; we order to your documented spec. Call (833) 510-5367 to start with a free estimate.
If you’ve got a Dvele bathroom in Coral Gables that’s showing its age, the next step is a measurement and a written price. Call (833) 510-5367 to schedule your free estimate. We’ll read the module, tell you honestly what’s failing, and put the scope and the price in writing before anything is ordered. Every Coral Gables project runs on The Garrison Standard: written price, background-checked and uniformed technicians, and a signed 365-Day Done Right Promise in your hand at close.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












