A Bradford company - serving Coral Gables, FL
A remodeled primary bathroom with a soaking tub and a walk-in shower
C
CWS · Coral Gables

CWS Bathroom Remodeling in Coral Gables, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Coral Gables
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A finished basement family room with a media wall and wet bar
A walk-in pantry with wood shelving
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Bathroom Remodeling: The Coral Gables Owner’s Guide

We handle CWS-related bathroom remodeling in Coral Gables, from a single failed component to a full room rebuild, with most projects landing between $9,000 and $28,000 installed. We’re an independent service provider and are not affiliated with CWS. Most owners discover a failure the same way: a slow leak that shows up as a soft spot in the subfloor, tile that starts to lift around the drain, or a vanity that rocks loose from the wall after a few seasons of humidity. By the time the symptom is visible, the problem underneath has usually been running for months.

Call (833) 510-5367

That pattern matters in Coral Gables more than most places. The same wet season that fogs your windows drives moisture behind tile and into whatever substrate sits beneath it. CWS components that were fine at install can fail early when the vapor path under a shower pan or behind a vanity isn’t detailed for a subtropical climate. When we open a wall in a 1950s Coral Gables home near the Granada entrance, we’re often looking at original mortar bed and framed subfloor that was never designed for this much sustained moisture. The failed part is almost never the whole story.

Key Takeaways

  • Typical CWS bathroom remodeling in Coral Gables runs $9,000 – $28,000 installed; a small bath runs $5,000 – $12,000.
  • Most failures here trace to moisture, not the component itself; a visible symptom usually means hidden damage underneath.
  • We bring a written price before any work starts and back the finished job with the 365-Day Done Right Promise.
  • We don’t stock parts and don’t carry parts on a truck. Parts are sourced and confirmed against your CWS model before we schedule.

Which CWS Models This Applies To

A tile setter installing wall tile in a shower

CWS bathroom product lines have changed part specs more than once, and the model line matters before anyone orders a substitution. We match to the model plate and the rough dimensions, not to a photo or a receipt. Here’s how we identify what you actually have and where the OEM-versus-aftermarket call lands.

Start with the data plate. On a CWS vanity or shower assembly, the model and series stamp is usually on the back panel, the underside of the deck, or inside the drain escutcheon collar. Note the series prefix and the dimensional spec, typically width by depth in inches. Two CWS units that look identical from across the room can take different drain centers, different surround profiles, or different valve trim, and the difference shows up at install, not at order time.

For the OEM-versus-aftermarket decision, we’re straight with you: on structural and wet-side parts (drain assemblies, valve cartridges, pan surrounds), a genuine CWS-spec part is worth the premium because fitment and warranty stay clean. On visible trim and finish pieces (faucet handles, escutcheons, toe-kick panels), a premium equivalent in a documented brand like Moen or Kohler often gives equal or better longevity, and those brands publish specs and warranties we can trace. We also work with KraftMaid and Cambria, Silestone in adjacent scope where these CWS-era bathrooms need a coordinated rebuild.

One compatibility gotcha worth knowing: mid-series CWS vanity runs changed the drawer glide pattern, so a replacement front from a later series can line up on the face and still miss the mounting screws by a fraction. Measure the glide spacing before you order a substitute, not after it arrives.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Bathroom Remodeling Is Failing

  • Soft or spongy floor around the toilet and shower threshold. Water has been reaching the substrate long enough to break it down. The component failing is usually the seal, not the tile, and the substrate is already compromised by the time you feel it.
  • Tile lifting or hollow sounds near the drain. The pan or surrounding grout has lost its bond, so moisture sits trapped under the tile. A hollow tap test around the drain tells you how far it has spread.
  • Vanity pulling away or rocking at the wall. Wall anchors and ledger screws corrode in a humid bathroom; the fastening fails and the cabinet works itself loose. It’s a fastening and moisture problem, not a cabinet quality problem.
  • Persistent musty smell after cleaning. Hidden moisture in the wall cavity or under the pan. In Coral Gables, a smell that returns within days points to an active moisture path, not surface mold.
  • Caulk lines that won’t stay closed. Repeated caulk failure at the tub or shower seam signals differential movement and moisture behind the joint. Recalking alone won’t hold; the source needs to be found.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A wide opening with a new beam where the kitchen wall was removed

Here’s the Coral Gables pricing you can plan against. These are installed ranges, parts plus labor, and we put the number in writing before a tool comes out.

Scope Installed Range
Bathroom remodel (full) $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What drives the range: whether the substrate is sound or has to be replaced, whether the wet-side parts are OEM spec or a compatible equivalent, tile selection, and whether we’re pulling permits for the scope. Parts and labor are broken out line by line so you can see exactly what the CWS-matched part costs versus the labor to install it. Every completed job carries the 365-Day Done Right Promise: if the work fails within a full year of completion, we come back and correct it at no charge. That guarantee is written and in your hand at close.

DIY or Call Us?

Some of this an owner can check safely, and some of it you should not touch. Check the things that don’t involve cutting, opening a wall, or working wet-side: look for the model plate, note the dimensions, do a hollow tap test around the drain, check caulk seams, and look for soft floor under the toilet base. That’s information gathering, and it helps us match the right part.

Where DIY goes wrong is the moment the work moves behind the tile or into a drain assembly. Opening a shower pan or resetting a drain is a wet-side job where a small leak turns into a $6,000 substrate rebuild. This is not a scare tactic, just what we regularly find in Coral Gables bathrooms where a homeowner resealed one joint and moved on. Water always finds the low point, and the low point is usually the framing.

If you’ve found soft floor or a failed drain, call us at (833) 510-5367 and we’ll give you a written price range for the scope before anything starts. No pressure, just the number.

FAQs

A small remodeled galley kitchen with cabinets to the ceiling

How long does a CWS bathroom component last in Coral Gables? Expect 10 to 15 years from a well-installed wet-side component in this climate, less if the substrate and vapor path weren’t detailed for humidity. Condensation and the long wet season wear seals faster here than in dry markets. Call (833) 510-5367 for an exact quote on replacement; estimates are free.

Can the CWS part be repaired instead of replaced? Sometimes yes, and we’ll tell you honestly when repair is the right call. A failed seal or corroded fastener is often a repair; a compromised pan or broken substrate is a replacement. We inspect before we recommend, so you’re not sold a rebuild you don’t need. Call (833) 510-5367 to schedule the inspection.

How long does the swap take? A vanity or shower component swap usually runs one to three days; a full bathroom remodel runs two to four weeks depending on scope and permit timeline. We give you the schedule in writing with the price. Call (833) 510-5367 for your free estimate.

How do you source the CWS part? We confirm the model and dimensional spec from your unit’s data plate, then source a genuine CWS-spec part or a documented premium equivalent depending on the component. We don’t stock parts and don’t carry them on a truck; the part is confirmed and ordered against your model. Call (833) 510-5367 and we’ll start with your model number.

One more thing worth saying plainly: we answer the phone with a live person, 24 hours a day, every day. No voicemail, no callback queue. When you call (833) 510-5367 to schedule your free estimate, a real person picks up and gets you on the calendar with a written price to follow.

Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled family room with new windows and a window seatA built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelvesA remodeled kitchen with a waterfall island and wood cabinetsAn open living space after a whole-home remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Coral Gables

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Coral Gables team

A local vetted partner works across Coral Gables and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 510-5367
Local Service Coverage

Request a Free Estimate in Coral Gables

Tell us what you need - Bradford Remodeling Co Coral Gables responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch