







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Coral Gables Homeowners Choose Cover Construction
We provide independent Cover construction service in Coral Gables, specializing in the cabinet installation, refacing, and countertop work that defines Cover’s system. What makes our Cover work different is that we treat it like a construction job, not a cabinet swap: we inspect the frame and substrate, replace failed boxes with moisture-resistant materials rather than patching particleboard, and reinstall Cover’s slab fronts and quartz tops with proper sealing for South Florida’s humidity. We’re not affiliated with or authorized by Cover; we’re an independent contractor that knows the product line inside and out. Call (833) 510-5367 for a free estimate.
Why Trust Bradford Remodeling Co Coral Gables for Your Cover Construction?

Our technicians have up to 22 years of experience, and much of that time has been spent working with Cover’s specific construction: the melamine-faced particleboard boxes, the integrated handle profiles, the slab-front door geometry, and the quartz and solid-surface counters. We know where these products fail in Coral Gables’s climate and how to address those failures in a way that holds up rather than just looking right on day one.
We source OEM hinges, handles, and touch-up kits when they’re available, so the finish and hardware match what you already own. When boxes or panels need replacement, we use high-quality moisture-resistant aftermarket materials that match the original finish. We don’t claim to stock Cover parts locally; we source what each job requires, and we’ll tell you honestly when a part has to be ordered.
Every Cover project we take on gets a written price before any work begins, and it’s covered by our 365-Day Done Right Promise. If a repair or installation fails within that year, we return and correct it at no charge. That’s the whole guarantee, stated plainly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Cover Construction Problems We Fix in Coral Gables
Cover cabinets perform well when installed correctly and maintained, but South Florida’s humidity and UV load create predictable failure patterns. Here are the ones we see most often in Coral Gables:
- Swelling and delamination at the bottom edges of cabinet boxes. This usually comes from prolonged moisture exposure: a slow under-sink leak, a drip from the dishwasher supply, or frequent wet mopping that wicks into the particleboard core. Once the core swells, it doesn’t shrink back. The fix is replacing the damaged box with a moisture-resistant panel and sealing the base and edges properly.
- Hinge pull-out and stripped screw holes in Cover’s particleboard boxes. Wide drawers and cabinet doors that get loaded heavily or opened daily stress the hinge screws, and particleboard loses its grip once the holes strip. We fill and reinforce the holes with hardwood inserts or move the hinge to fresh material, and replace the hinges if they’re worn.
- Fading or yellowing of light-colored slab fronts from UV exposure. Coral Gables kitchens with east or south-facing windows take direct sun for hours, and light-colored melamine and laminate fronts yellow over time. We can replace individual door fronts to match the rest of the run, or advise on window film and blinds to slow further fading.
- Countertop seam separation and chipping at edges. This happens when a quartz or solid-surface top is set over cabinet frames that aren’t level or have shifted. The seam opens, the edge chips, and water gets into the substrate below. We re-level the frames, re-set the top, and address the seam before reinstalling.
- Delamination at door edges from steam and cooking moisture. Cover’s slab fronts are edge-banded, and that banding can lift near the range or dishwasher after years of steam exposure. We re-adhere or replace the door front and check the ventilation above the cooktop, since inadequate exhaust is usually the underlying cause.
Cover Parts & Our Repair-vs-Replace Approach

For Cover repairs, we source OEM hinges, handles, and touch-up kits when they’re available, so the hardware and finish stay consistent with what you have. For boxes and panels, we use high-quality moisture-resistant aftermarket materials that match the original finish. We don’t keep Cover parts in local stock; we identify what the job needs during the initial inspection and source it from there, and we’ll tell you upfront if a part has to be ordered.
Our repair-versus-replace call comes down to the frame. If the cabinet frame is structurally sound and the boxes are intact, we repair. If the particleboard core has swollen, delaminated, or lost its screw-holding strength across a whole run, replacing those boxes with moisture-resistant material is the honest answer. We’ll show you which is which before any work starts. Call (833) 510-5367 to schedule a free estimate.
Our Cover Service Process – Step by Step
- 1
Diagnosis. We inspect the cabinet frames, check for soft spots and delamination, test hinge and drawer-slide function, examine countertop seams and edges, and trace any moisture source, whether that’s a leaking supply line, a failed caulk joint, or a ventilation problem.
- 2
Repair or install. For repairs, we replace damaged boxes with moisture-resistant panels, reinstall Cover doors with new hinges, and re-set or re-seam countertops. For installs, we level the frames, set Cover’s cabinets and quartz tops, and seal the base, edges, and countertop-to-wall joints.
- 3
Test. Every door and drawer gets opened and closed, hinges adjusted, and seams checked. We run water at the sink and dishwasher to confirm no moisture is getting into the new boxes, and we verify the countertop is level and the seams are tight.
- 4
Warranty. You get a written price before work begins and our 365-Day Done Right Promise on the completed work. If something fails within that year, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterCover Products We Service & Install in Coral Gables
We work across Cover’s cabinet and countertop line: the slab-front cabinet doors, the integrated handle profiles that define much of the line, the melamine-faced particleboard boxes, and Cover’s quartz and solid-surface countertops. We install full cabinet runs, reface existing boxes with new Cover fronts, and set quartz and solid-surface tops with proper seaming and edge treatment. We also handle backsplash installation, kitchen islands built around Cover cabinetry, and small and partial kitchen remodels where Cover is the cabinet and top specification. If you’re not sure which Cover series you have, bring a door front or a photo to the estimate and we’ll identify it.
We Also Service These Brands
We’re not a single-brand shop. Alongside Cover, we work with KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, among others. That matters if you’re mixing brands across a kitchen or bath, or if a Cover line has been discontinued and you need a compatible match. We’ll tell you what pairs well and what doesn’t.
FAQs – Cover Construction Service in Coral Gables

Is Bradford Remodeling Co Coral Gables authorized by Cover? No. We’re an independent Cover service provider, not affiliated with or authorized by the manufacturer. We work with Cover products because we know them, not because Cover endorses us.
Do you use genuine Cover/OEM parts? We use OEM hinges, handles, and touch-up kits when they’re available, and high-quality moisture-resistant aftermarket materials for boxes and panels when OEM parts aren’t. We’ll tell you which parts are OEM and which aren’t before the job starts.
How long does Cover service take? A hinge or door-front repair is typically a single visit. Replacing swollen boxes or re-setting a countertop usually runs two to three visits once parts are on hand. A full Cover cabinet installation or small kitchen remodel is measured in weeks, not days, and we’ll give you a written schedule with the price. Call (833) 510-5367 for an exact timeline on your job.
What Cover models/series do you cover? All of Cover’s slab-front cabinet lines, integrated handle profiles, melamine-faced box construction, and quartz and solid-surface countertops. If you’re unsure which series you have, a photo or a door front at the estimate is enough for us to identify it.
Will service void my Cover warranty? Our repairs are designed to be warranty-safe: we replace like with like where the original is under warranty, and we don’t modify the cabinet structure beyond what the repair requires. If a repair could affect a manufacturer warranty, we’ll flag it before we touch anything.
How much does Cover construction cost in Coral Gables? Cabinet installation runs $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash installation $800 – $2,500, and a small kitchen remodel $9,000 – $20,000. Every price is written before work starts, and every job carries our 365-Day Done Right Promise. Call (833) 510-5367 for an exact quote; estimates are free.
Book Your Cover Service in Coral Gables, FL
If you’re in Coral Gables and your Cover cabinets are swelling, your hinges are stripping, or you’re ready to install a new Cover kitchen, call (833) 510-5367 to schedule a free estimate. We’ll inspect the job, give you a written price, and put the 365-Day Done Right Promise behind the work.
Written by the team at Bradford Remodeling Co Coral Gables.
Written by the team at Bradford Remodeling Co Coral Gables.












