







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Coral Gables Owner’s Guide
CGI kitchen remodeling in Coral Gables typically runs $14,000 – $45,000 installed, depending on cabinet layout, surface materials, and whether the rough-in moves. We schedule estimates within a few business days and give you a written price before any tool comes out. Owners usually find the failing piece the same way: a cabinet door that won’t stay shut, a countertop seam that starts catching a fingernail, or a soft spot under the sink that wasn’t there last season. In Coral Gables, that soft spot is often the first honest clue that the substrate has been taking on moisture behind a sealed surface.
Which CGI Models This Applies To

CGI cabinetry and millwork show up across a wide range of builder lines and semi-custom series, and the part you need depends less on the year than on the series and the door style within it. Before you order anything, find the label inside the cabinet box or on the back of a drawer front. It usually carries a series code and a finish code, and both need to match. A door pulled from a different series in the same finish can sit a sixteenth of an inch off at the hinge and never line up flush.
Then measure. Cabinet widths are nominal, not actual, and a 24-inch box often measures 23 5/8 inches across the face frame. Hinge bore spacing, drawer glide screw patterns, and shelf pin hole spacing differ by series, and CGI is no exception. If your label is gone, measure the bore and the glide pattern and match on those dimensions rather than on color alone.
On the OEM question: original CGI parts give you an exact finish and fit match, and for visible door fronts and drawer faces that is usually worth the wait. Quality aftermarket equivalents make sense for hinges, glides, and shelf pins, where standards are tight enough that a spec-matched part performs the same. We’re an independent provider and not affiliated with CGI, so we source what matches your label and specs, and we tell you in writing which route we’re taking. We also work with KraftMaid, Cambria, and Silestone cabinetry and surfaces when a full replacement makes more sense than a part match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Kitchen Remodeling Is Failing
- Doors that drift out of alignment. Hinges loosen as the screw holes in the cabinet stile wallow out, usually from a door that was overloaded or slammed for years. Left alone, the hole grows and the door starts rubbing the frame.
- Drawers that stick or drop at the front. Glide wear or a bent glide rail, often accelerated by humidity swelling the drawer box. A drawer that suddenly needs a lift to close is telling you the rail has moved.
- Seams and edges lifting on the countertop. In Coral Gables, the combination of year-round humidity and air conditioning running hard means surfaces move constantly. A seam that opens is a maintenance item now and a moisture problem if it waits.
- Soft or swollen cabinet bottoms under the sink. The particleboard or plywood floor of the sink base absorbs drips from a supply line or a slow drain leak. Once it swells, it doesn’t shrink back, and the cabinet loses its ability to hold weight.
- Caulk lines failing along the backsplash. Movement at the wall-to-counter joint cracks the caulk bead, which lets water behind the backsplash. That’s the most common path to hidden damage in a Coral Gables kitchen.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Coral Gables breaks down like this:
| Scope | Installed Range |
|---|---|
| Kitchen remodel, full | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves with three things: how many boxes and faces are being replaced, whether the rough-in has to shift for a new layout, and the surface material. A part-level fix on a door or glide sits at the low end; a full cabinet run with new stone and a moved sink sits near the top. Every price is written before work starts, and the number doesn’t move at the door. All completed work carries the 365-Day Done Right Promise: if it fails within a year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a lot of this yourself. Read the label inside the cabinet, measure the hinge bore and glide pattern, photograph the failing part next to a tape measure, and note whether the cabinet bottom is soft or just stained. That’s information, not repair, and it makes the estimate faster.
Where DIY goes wrong: replacing a sink base or a countertop section means cutting water supply lines and dealing with a rough-in, and a bad connection behind a cabinet is a slow leak you won’t see until the floor is involved. Cabinet boxes are also heavier than they look and need to be anchored into studs, not drywall. If the fix touches plumbing, gas, or a structural anchor, stop and call us at (833) 510-5367. Estimates are free.
FAQs

Cabinet boxes and door fronts typically hold 15 to 20 years when they’re kept dry, and surfaces like stone or quartz hold far longer. In Coral Gables, the limiting factor is moisture, not wear: a leaky supply line behind a sink base can soften the cabinet floor in a single season. Call (833) 510-5367 for an exact quote on your kitchen.
Often yes. Hinges, glides, shelf pins, and door faces are usually repairable or replaceable without touching the cabinet box. Swollen cabinet bottoms and opened countertop seams generally can’t be repaired back to original strength and need replacement. Call (833) 510-5367 and we’ll tell you which side of that line your part falls on.
A part-level fix like a door, glide, or hinge swap is a short visit, usually a couple of hours. Cabinet installation runs several days, and a full kitchen remodel with new surfaces runs longer depending on scope. You get the schedule in writing with the price. Call (833) 510-5367 for an exact quote.
We match on the series code and finish code from your cabinet label, plus the measured bore and glide dimensions when the label is missing. If the label is gone and the dimensions don’t narrow to one match, we say so before ordering. Call (833) 510-5367 to schedule your free estimate.
If your CGI kitchen has a part that’s failing, the useful next step is a written price and a clear scope, not a guess. Call Bradford Remodeling Co Coral Gables at (833) 510-5367 for a free estimate. A live person answers around the clock, the crew is background-checked and uniformed, and every completed Coral Gables project closes with a clean site, a documented scope, and the 365-Day Done Right Promise in your hand.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












