







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The Coral Gables Owner’s Guide
Fence installation on a CGI-spec property in Coral Gables typically runs $3500 – $9000, all in, depending on footing count, total linear footage, and how close to a property line the posts have to sit under city setbacks. We install to the CGI drawings that come with the plans, and every price is written before a tool comes out.
Owners usually find out something is wrong one of two ways. Either the fence line follows a different survey than expected, or the old installation starts failing early. Common symptoms look like posts that lean after a heavy rain, gates that drag on the driveway, or a fence that was set with no permit and has to be corrected before a sale closes. In Coral Gables, we see all three. On a property in the Riviera section, for example, a 4-foot aluminum run was recently installed flush at grade along a city right-of-way, and the inspector required it either moved back or re-permitted. That’s the pattern: the fence looks fine, and the paperwork or footing doesn’t hold.
Which CGI Models This Applies To

CGI is the product line your plans reference, not a single fence model. What you need to match is the fence specification on the drawing set: post size, post spacing, panel height, material, and the footing detail. Before we order a single post or panel, we pull out the CGI sheet, find the fence schedule, and match it line for line. On Coral Gables properties near the water or along the boundaries of Coral Way, the spec often calls for a heavier post or deeper footing because of our soil and water table. Get that wrong, and the fence sits in the wrong place or moves the first time we get a wet season.
The OEM-vs-aftermarket decision matters less here than in most parts. Aluminum posts, vinyl panels, and gate hardware are all made to standards, and quality equivalents exist. What we don’t do is swap in a lighter post or a shorter footing to save a few hundred dollars. If the CGI spec calls for a specific post size, that’s what gets installed. If it’s not in stock anywhere local, we say so up front rather than substitute quietly. KraftMaid, Cambria, and Silestone don’t apply here; fence is a separate spec and we treat it that way.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Fence Installation Is Failing
A fence either holds or it doesn’t. Failing fences give you warning signs. Some are visual, some only show up on paper.
- Posts leaning after heavy rain. The footing wasn’t set deep enough for Coral Gables soil, or the concrete didn’t cure before backfill. This is a footing problem, not a post problem.
- Gates dragging or sticking. Either the gate post moved or the hinge points were set before the concrete cured. In this humidity, a misaligned gate will only get worse.
- Posts rusting at grade within two to three years. Cut-end posts without a protective coating will rust from the bottom up. In Florida’s salt air, especially near the water, the timeline is shorter than up north.
- Panels separating or sagging between posts. Usually a spacing issue. The panels span further than the manufacturer intended, and the material sags under its own weight in the heat.
- Missing or mismatched permit paperwork. If the fence was installed without a permit or the installed fence doesn’t match the permitted plan, that’s a problem for inspection and for a future sale. We’ve seen more than one Coral Gables sale delayed for exactly this.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in Coral Gables runs $3500 – $9000 installed. Here’s what that covers and what moves the number.
| Line item | Typical range |
|---|---|
| Permit and inspection support | $300 – $800 |
| Posts, panels, and gate hardware | $1,400 – $4,200 |
| Footings and concrete | $600 – $1,800 |
| Labor and installation | $1,000 – $2,000 |
| Site prep and cleanup | $200 – $600 |
| Total installed | $3500 – $9000 |
What drives the top of that range: total linear footage, gate count, number of posts, whether the fence runs along a right-of-way that needs extra setback work, and whether the old fence needs removal and disposal. Materials are quoted at cost plus a documented markup, so you see what you’re paying for. Every installed fence carries the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge. Call (833) 510-5367 for a written estimate before anything is ordered.
DIY or Call Us?
You can safely measure your fence line, photograph the existing posts and panels, and pull the CGI plan sheet to find the spec number. That’s where the safe part ends. Setting footings correctly means knowing the frost line isn’t the question down here; the water table is. Posts set too shallow will heave in a wet season and you’ll be resetting them within a year. Gates have to be hung square and plumb on posts that have already been set and cured, not on green concrete. And any fence set along a Coral Gables property line or right-of-way has a permit and setback path that trips up most homeowners.
If you’re already mid-project and the footing has failed, that’s a specific repair, not a full rebuild. Call (833) 510-5367 and we’ll walk the situation and tell you straight whether it’s a fix or a reset. Estimates are free and the price is written before anything is moved.
FAQs

How long should a fence installation last in Coral Gables? A properly installed fence in this climate should hold for 15 to 20 years for aluminum or vinyl on concrete footings. Wood fences in South Florida tend to run closer to 10 to 15 years because of the humidity and termite pressure. The main variable isn’t the material; it’s the footing depth and whether the post ends were protected from water intrusion.
Can my failing fence be repaired instead of replaced? Often, yes. A single failed footing, a gate that’s out of plumb, or a run of sagged panels can be repaired without rebuilding the whole fence. We assess the post condition first. If the posts are sound and the problem is localized, repair is the honest answer. If the footings are failing across the line, a repair is a stopgap.
How long does a new fence take to install? Most residential fence installs in Coral Gables run three to five working days once permits are in hand. Permit turnaround is the wild card; the city review can add a week or more, and right-of-way installations take longer than fencing a back yard. We give you a realistic schedule in writing before we start.
How do you source the fence materials for a CGI property? We start from the fence schedule on the CGI plan sheet, confirm the post size, spacing, and footing detail, then source to that spec. If a specific post or panel is not available locally in the time you need it, we tell you before ordering anything, and we don’t substitute a lighter spec to save time. That’s how the 365-Day Done Right Promise actually works.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












