







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Kitchen Remodeling: The Coral Gables Owner’s Guide
CertainTeed kitchen remodeling in Coral Gables typically runs $14,000 – $45,000 for a full kitchen, with smaller scopes landing between $9,000 and $20,000. That range covers tear-out, substrate repair, cabinet installation, countertops, and finish work, priced in writing before anything gets torn out. We install CertainTeed-compatible systems and premium materials throughout Coral Gables, and we quote each job to your actual product and layout, not a ballpark.
Owners usually discover a failed CertainTeed part the same way: a slow leak behind the cabinet run, a countertop that has pulled from the substrate, or a moisture stain blooming along the drywall seam under a window. Coral Gables humidity and the seasonal wet-dry swing do the rest, and what looked minor in March is a soft substrate by September. This guide covers which CertainTeed products we work with, what actually fails, and what honest pricing looks like here.
Key Takeaways
- Full CertainTeed kitchen remodels in Coral Gables run $14,000 – $45,000; small kitchens $9,000 – $20,000.
- Cabinet installation alone is $4,000 – $13,000; countertops $2,000 – $6,500; backsplash $800 – $2,500.
- We’re an independent service provider, not affiliated with CertainTeed.
- Every price is written before work starts, backed by the 365-Day Done Right Promise.
Which CertainTeed Models This Applies To

CertainTeed makes a broad set of building products, and not every one lands in a kitchen. The pieces we most often specify and service in Coral Gables kitchens are CertainTeed’s gypsum board and mold-resistant drywall, its fiber cement siding (rarely inside, but relevant on additions), and its ceiling panels. For kitchen substrate and wall assembly work, the mold-resistant board line is the one that comes up most, and CertainTeed marks it with a printed product name on the face paper and a batch code on the end tape. Read those before you order anything: the board designation tells you the thickness (typically 1/2 in. or 5/8 in.) and whether it’s regular, moisture-resistant, or fire-rated.
Here’s the compatibility gotcha most Coral Gables owners miss: moisture-resistant board is not the same as a waterproof backer, and a substrate that’s rated for damp rooms can still fail behind a wet wall if the vapor path is wrong. Match the product to the room’s actual moisture load, not just the label. On OEM versus aftermarket: for standard sizes and finishes, a quality aftermarket equivalent meets the same spec and the manufacturer warranty still applies to the material itself, but you lose the single-source paper trail. For anything load-bearing or fire-rated, we stay with the OEM product and manufacturer-documented specs so the inspection record is clean. That’s why Bradford works from a documented roster of premium names, including CertainTeed alongside KraftMaid, Cambria, and Silestone, so every specification is traceable.
To identify the right part, check the board’s printed face, the end-tape batch code, and the panel thickness with a tape measure. If the labeling is gone, the thickness and the room’s moisture conditions are what determine the correct replacement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Kitchen Remodeling Is Failing
In Coral Gables, kitchen substrate failures follow a pattern. These are the symptoms we see on the initial walkthrough, and what’s usually underneath each one.
- Soft spots behind the sink cabinet. Water finds the seam and the board swells from the inside out. By the time it feels soft to a thumbnail, the failure has been running for months.
- Countertop pulling away from the wall. The substrate has swelled below and pushed the surface off its plane. That gap invites more moisture and the problem compounds.
- Staining or darkening along a wall seam. That’s mold starting behind the finish where the board isn’t drying. Coral Gables humidity keeps it alive long after the leak is gone.
- Cracks at a corner or joint without impact damage. Movement from a settled substrate under a fixed surface. It rarely stops at one crack.
- A musty smell that doesn’t clear after cleaning. The source is behind the finished surface, not on it. No amount of surface work will stop it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed ranges for Coral Gables, priced with labor and materials together so you see the whole number before work starts:
- Full kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Kitchen island installation: $3,000 – $10,000
- Backsplash installation: $800 – $2,500
What moves the number: whether the substrate behind the cabinets has to come out, the length of the cabinet run, how many trades touch the same wall, and the finish level on the countertop and backsplash. A like-for-like swap with sound substrate sits at the bottom of the range; a full tear-out where moisture has spread behind the wall sits higher. Every job gets a written line-item quote before demolition, and every completed project carries the 365-Day Done Right Promise, which means if the work fails inside that year, we come back and correct it at no charge. Give us a call for an exact figure.
DIY or Call Us?
Some of this an owner can safely check. Read the printed face and end-tape batch code on the board to confirm what’s installed, measure the panel thickness, and look for soft spots with a firm thumb near the sink and along the countertop seam. That’s information you can gather and bring to a quote. What you shouldn’t do yourself is remove or replace certain Building Products that are load-bearing or tied into the fire-rated assembly. Cutting into a fire-rated or load-bearing wall without knowing its rating is a genuine safety risk, and it can void the assembly’s rating and complicate the inspection later. Moisture damage also has a way of extending past what’s visible, and pulling one panel to “take a look” often turns a contained repair into a full tear-out with no quote behind it.
That’s the honest split for a certain Product like this. Diagnose from the surface; let a trained crew open it up. Call (833) 510-5367 and we’ll put a written number on the job before anything moves.
One note on who to call: we’re Bradford Remodeling Co Coral Gables, an independent service provider. We install and work with CertainTeed-compatible products, but we’re not affiliated with CertainTeed, and the manufacturer warranty on the material is separate from our own written guarantee on the labor.
FAQs

Expect 15 to 20 years from a properly installed moisture-resistant substrate in a dry interior wall, and noticeably less if water is allowed to reach it. Coral Gables humidity and the summer wet season shorten that honestly: a board that stays damp doesn’t age, it fails. The lifespan depends almost entirely on how that wall dries.
Sometimes, but it depends on how far the moisture goes. A small surface crack or a localized stain with a dry substrate behind it can often be repaired. Once the board feels soft or a musty smell persists, replacement is usually the honest answer, and a repair would just cover the source. We recommend a firm to confirm what’s actually behind the surface before either call.
A focused substrate and cabinet-run repair is often a few days; a full kitchen remodel in Coral Gables runs multi-week depending on scope, materials, and permits. Countertop and backsplash work alone can be a single visit. We give you a written timeline with the quote so you know what to expect before we start.
We source CertainTeed-compatible material through documented supplier channels, match the batch and thickness to your install, and pull permits where the scope requires it. That paper trail matters on fire-rated and load-bearing work. Call (833) 510-5367 for a free estimate, and we’ll quote the exact material your kitchen needs.
Give us a call at (833) 510-5367 to schedule your free estimate. A live person answers, day or night, and you’ll have a written price before a single tool comes out.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












