







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Bathroom Remodeling: The Coral Gables Owner’s Guide
We install CertainTeed-compatible bathroom remodeling for Coral Gables homeowners, with full bathroom remodels typically running $9,000 – $28,000 and a small bathroom refresh running $5,000 – $12,000. We’ll give you the price in writing before any work starts. Same-day scheduling is not how a bathroom remodel works, but we can usually get an estimator to your door quickly once you call.
Most Coral Gables owners don’t come to this page looking for a part. They come because something in the bathroom has already failed: a ceiling stain spreading under a CertainTeed tile or membrane, a backer board that’s gone soft around the tub, a shower tile popping off a wall, or a grout line that opens up every few months no matter how many times it’s patched. That’s the symptom picture. The part is what we figure out together once we’re standing in the room.
Which CertainTeed Models This Applies To

CertainTeed’s bathroom-facing products aren’t a single line, so the “model” is really three separate decisions: the tile and flooring product, the backer board or substrate, and the waterproofing membrane. On the tile side, you’ll see CertainTeed ceramic and porcelain products sold in boxes with the series name printed on the carton end. On the substrate side, CertainTeed’s backer board carries a printed label on the face of each panel with the product name and thickness. The membrane is the product most often misidentified, because it’s buried under the tile and nobody sees it again until something goes wrong.
Here’s the compatibility gotcha that costs Coral Gables homeowners real money: the thickness of the backer board has to match the thickness the tile was set to, or the finished wall sits proud of the tub flange and the trim won’t close. A half-inch board swapped for a quarter-inch board shifts the whole wall plane. We measure the existing board before we order anything, and we match the substrate to the tile, not the other way around.
On OEM versus aftermarket: CertainTeed-branded substrate and membrane have documented manufacturer specs and warranties, which matters if you ever need to make a claim. Quality aftermarket equivalents exist and can be perfectly sound, but they don’t carry CertainTeed’s paperwork. We’ll tell you which one we’re putting in and why, and it’s your call. We’re an independent service provider and not affiliated with CertainTeed; we install their products because their documentation is traceable, the same reason we work with KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Bathroom Remodeling Is Failing
- Tile lifting or hollow-sounding underfoot. Usually a bond failure between tile and substrate, often because the backer board wasn’t fastened tight enough or wasn’t properly primed before thinset. Once tile is loose, water gets behind it and the failure spreads.
- Grout that keeps cracking in the same lines. Cracks that return after repointing point to movement underneath, most often a substrate that’s flexing because it was installed over a floor that wasn’t flat to begin with.
- Soft or swollen backer board around the tub or shower. This is moisture that got past the tile face. In Coral Gables, the combination of year-round humidity and a shower running twice a day means a small waterproofing gap has months of wet-dry cycling to work itself into the board.
- Grout lines darkening or a musty smell that won’t clear. That’s moisture trapped in the assembly, not surface mildew. Cleaning the surface won’t fix it because the water is behind the tile.
- Caulk at the tub or shower pan failing repeatedly. Caulk that peels within a season usually means the joint is moving because the pan or tub isn’t supported properly, or the substrate behind it has already started to fail.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full bathroom remodel in Coral Gables runs $9,000 – $28,000. A small bathroom remodel runs $5,000 – $12,000. A walk-in shower installation runs $4,500 – $12,000, a tub-to-shower conversion runs $3,500 – $10,000, a shower replacement alone runs $3,000 – $8,500, and a vanity installation runs $800 – $3,000 if the vanity is the only thing changing.
What moves the number: square footage of tile, whether the substrate has to come out (it often does if the board is soft), whether the drain and rough-in plumbing stay where they are, and the finish tier you choose. Waterproofing and backer board replacement are line items, not assumptions folded into a round number. You’ll see parts and labor broken out separately, and the written price doesn’t move once the work starts. Every completed project carries our 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Press along the base of the wall around the shower and tub to feel for soft spots. Tap tile with a plastic handle and listen for hollow spots. Check the caulk line at the tub and look underneath at the ceiling below, if you have one. Those checks tell you whether the problem is surface or structural.
Where DIY goes wrong is the moment a tile comes off and reveals what’s behind it. Removing a single tile from a waterproofed assembly can open the membrane, and re-sealing that opening correctly is a substrate and membrane job, not a grout job. Getting it wrong means water goes into the wall cavity, which in Coral Gables’ humidity is a fast path to mold. We’d rather you check it and hand it over than lose a weekend and make it worse.
Call (833) 510-5367 and a live person picks up, day or night. Estimates are free and come with a written price.
FAQs

Properly installed tile, substrate, and membrane should last 20 to 30 years in a Coral Gables bathroom. The realistic limiter isn’t the material, it’s the waterproofing and the ventilation; a bathroom with a run-of-the-mill exhaust fan and a substrate gap will show failure in 8 to 12 years. Call (833) 510-5367 for an inspection and a written estimate.
Sometimes, yes. Isolated loose tile or a single failed caulk joint can be repaired if the substrate behind it is still sound. Once the backer board is soft or the membrane is compromised, repair is temporary and a partial rebuild is the honest answer. We’ll tell you which category you’re in before any price is quoted.
A small bathroom remodel typically runs one to two weeks; a full bathroom remodel in Coral Gables runs three to five weeks depending on tile scope and whether the plumbing stays in place. We give you the schedule with the written price so you’re not guessing week to week.
We order the specific Substrate, tile, and membrane products by the label and model printed on the existing material, and we match the board thickness to the tile before anything ships. You get the manufacturer’s documentation with the job. Call (833) 510-5367 to schedule a free estimate.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












