







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Bathroom Remodeling: The Coral Gables Owner’s Guide
Belgard bathroom remodeling in Coral Gables typically runs $9,000 – $28,000 installed, with most full baths landing in the $14,000 – $20,000 band. Smaller baths and shower-only scope come in between $5,000 and $12,000. We install Belgard-compatible systems and hardscape-matched finishes across Coral Gables, and we give you a written price before any work starts. Scheduling is planned, not same-day; a bath tear-out and rebuild is a multi-week job and we quote it that way.
Owners usually find the failure the same way. A grout line at the shower curb turns dark and softens. Water wicks under a Belgard paver sill at the bathroom’s exterior wall. Or a floor paver near the toilet rocks underfoot, which means the substrate beneath it has moved. In Coral Gables, that last one shows up constantly in 1950s ranch homes where the original slab has shifted. Belgard sells hardscape and paver systems, not plumbing fixtures. So when we say Belgard bathroom remodeling, we mean the paver floor, the curb, thresholds and exterior sills that tie your bath to the hardscape. KraftMaid, Cambria and Silestone handle the interior casework and surfaces; Belgard handles the stone that meets the ground.
Key Takeaways
- Belgard makes pavers, wall block, and hardscape systems, not tubs, toilets or shower valves. If your valve is leaking, this is not a Belgard part.
- Installed Belgard-related bath scope in Coral Gables runs $9,000 – $28,000 for a full bath, $5,000 – $12,000 for a small one.
- We are an independent contractor, not affiliated with Belgard. We source to their published specs.
- Every project carries The Garrison Standard: a written price before work begins and the 365-Day Done Right Promise on the finished job.
Which Belgard Models This Applies To

Belgard’s paver lines run under series names you’ll find stamped on the carton or on the band at the pallet edge: the Dimensions and Trio families, plus the older Aqualine and Mega-Bergerac pavers you’ll still see on mid-century Coral Gables properties. Bathroom-relevant Belgard parts are the thinner wall block used for shower curbs and knee walls, the bullnose and coping pieces at thresholds, and the paver face that meets a bath’s exterior wall where it abuts a patio or driveway.
Identify what you have before you order anything. Measure the paver face length and width in millimeters, note the finish color, and look for the series print on any leftover pieces in the garage or under the house. Belgard changed nominal sizing between some production runs, so a 6×9 from one series will not always sit flush against a 6×9 from another. That mismatch is the compatibility gotcha that catches most owners. If the print is gone, we measure the course and match to current spec.
On OEM versus aftermarket: Belgard’s own pieces are the simplest match when the series is still in production. When it’s discontinued, a comparable concrete paver from another maker can work if you match the thickness and joint width, but expect a visible color shift within two seasons of Miami sun. We won’t pretend a substitute is a match. We tell you what it will look like in year three.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Bathroom Remodeling Is Failing
- Dark, spongy grout at the shower curb. Water is getting behind the curb block because the seal or slope failed. That moisture then feeds mold in the wall cavity. A curb that stays wet after a day is a curb that’s leaking.
- A paver that rocks when you step near the toilet or vanity. The thinset or sand bed beneath it has broken down. In Coral Gables, high water tables and the seasonal wet season push moisture up through slabs, and a paver that was tight in January is loose by August.
- Efflorescence, the white chalky bloom on Belgard face. Salt and minerals wicking to the surface. It usually means water is traveling through the block from behind, not sitting on top of it.
- Visible gaps at the threshold where the bath meets patio or driveway. The coping piece has shifted or the joint has opened. That gap is the entry point for the water damage you’ll find later at the baseboard on the other side of the wall.
- Color fading or chalking on south- and west-facing surfaces. South Florida UV does this to any concrete paver eventually. Fading alone isn’t failure. Fading with surface flaking is, because the top layer is going.
One more reality: Belgard concrete pavers under Florida sun and daily shower moisture hold up well, but the joint sand and sealant around them are the wear items. Plan on resealing roughly every three to five years. That’s a floor, not a guess.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Belgard-related bathroom work runs in Coral Gables, installed, with parts and labor broken out in the written quote:
| Scope | Installed Range |
|---|---|
| Full bathroom remodel (Belgard floor/curb scope included) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What moves the number: whether the substrate gets replaced or just resurfaced, how much Belgard face you’re matching to existing hardscape, and whether the rough-in plumbing has to move. Parts and labor are separate lines on the written quote. Nothing gets added at the door. The 365-Day Done Right Promise covers the finished work for a full year: if a joint fails or a curb leaks within that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely do a few things yourself. Measure the paver and note the series print. Photograph the failing joint. Check for a soft spot by pressing, not prying. That’s the diagnostic work, and it helps us quote accurately.
What we’d steer you away from: pulling up curb block or a shower threshold on your own. Under those pieces sits the waterproofing membrane, and once you open it you’ve got a wet wall cavity and a shower that can’t be used until it’s closed correctly. Setting a Belgard paver flat is not the hard part. Getting the slope and the membrane right behind it is, and getting it wrong floods the wall behind the tile. We’re honest about that split because a failed DIY shower pan is a much bigger bill than the original repair.
Call (833) 510-5367 and we’ll talk through what you’ve got, what part matches it, and what it costs. Live person, every time.
FAQs

The paver itself will last decades, but the joint sand and sealant around it are what fail first, usually within three to five years in Coral Gables humidity. When the joint goes, water gets behind the block and the damage starts. We seal and re-sand as part of the install and spec the reseal interval in the written scope. Call (833) 510-5367 for an exact quote on your bath; estimates are free.
Often yes, if the failure is a single joint or a shifted coping piece and the membrane behind it is intact. We check the membrane first. If it’s compromised, spot repair is a band-aid that fails again inside a year. If the substrate and waterproofing are sound, we reset and reseal the Belgard piece alone, which is the cheaper path. Call (833) 510-5367 and we’ll tell you which one you’re facing.
A single-piece reset with sound waterproofing behind it is a one-to-two-day job. A curb or threshold replacement that requires opening and re-flashing the membrane runs three to five days, because the waterproofing has to cure before the new Belgard face goes down. A full bath rebuild with Belgard floor and curb scope runs two to four weeks depending on substrate repair. Call (833) 510-5367 and we’ll give you the timeline in writing.
We measure the existing course, match the series and finish from the specs, and order to the millimeter rather than eyeballing it. When the series is discontinued, we tell you the substitute, its color-shift risk under Florida sun, and let you decide before we order. Every part and its cost appears on the written quote. Call (833) 510-5367 and we’ll start with a measurement and a written price.
Whether your bath needs Belgard-matched stone, a KraftMaid vanity, or a Cambria or Silestone top, Bradford Remodeling Co Coral Gables handles the whole scope on one written price. We install premium, documented brands so every spec is traceable. Our technicians have up to 22 years of experience, they’re background-checked and uniformed, and we’re held to The Garrison Standard, part of the Garrison Partners family since 2004. You get a written price before any work starts and the 365-Day Done Right Promise behind the finished job.
Call Bradford Remodeling Co Coral Gables at (833) 510-5367 for your free estimate. A live person answers around the clock, and Coral Gables homeowners get a straight number before anyone picks up a tool.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












