







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Windows & Doors: The Coral Gables Owner’s Guide
We install and service Barrette windows and doors across Coral Gables, and most projects land between $4,500 and $15,000 for window replacement or $8,000 to $25,000 for impact-rated installation. Once parts are matched and the order is placed, most single-window jobs finish in a day, though impact-rated units sometimes run into a second visit for inspection. We’re an independent service provider, not affiliated with Barrette, but we know the product lines well enough to get you the right glass, hardware, or seal the first time. Coral Gables owners usually discover trouble the same way: a window that suddenly whistles during a summer storm, a screen door that won’t catch, or a fogged pane that never clears.
Which Barrette Models This Applies To

Barrette makes both vinyl and aluminum window lines, plus patio and entry door systems, and each series uses different part numbers for glass, sash balances, weatherstripping, and screen assemblies. The label on the sash frame or jamb of your unit is the fastest way to identify it. If the label’s gone, measure the visible glass and the frame opening precisely. Coral Gables homes built in the 1980s and 1990s often have original aluminum-frame Barrette units, and those parts differ from the vinyl series that replaced them.
On the OEM versus aftermarket question: for hardware like locks, rollers, and screen frames, a quality aftermarket equivalent often outlasts the original at half the cost. For glass and structural frame components, OEM or OEM-equivalent matters more because impact ratings and wind-load specs are tied to the exact assembly. We source both when the job calls for it, and we’ll tell you plainly which one you need. We work with other manufacturers too, including KraftMaid, Cambria, and Silestone on other parts of a home improvement project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Windows & Doors Is Failing
Most Coral Gables homeowners don’t notice a failing window or door part until it’s causing a real problem. These are the symptoms we see most often:
- Fogging between the panes. The sealed unit’s desiccant has given out. Once moisture gets inside a dual-pane assembly, the window loses its insulating value, and reglazing or replacing the sash is the only fix.
- Wind whistling or drafts. Worn weatherstripping or a failed sash gasket. This is common in Coral Gables, where salt air and humidity break down rubber seals faster than in dry climates.
- A door that won’t latch or drags at the threshold. Usually a failed roller or a settled hinge. In aluminum-framed sliders, the track wears thin and the door drops out of alignment.
- Water stains or soft wood near the frame. Failed sealant or a compromised frame seal. In Coral Gables’ wet season, a small gap becomes a rot problem inside one season.
- Screens that tear or pop out of the frame. UV degradation of the screen spline or frame channel. Vinyl spline gets brittle after four or five Florida summers and stops holding the mesh.
One note on what’s not in this list: broken glass itself. That’s a safety issue, and we’ll cover it below.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed prices for Barrette window and door parts in Coral Gables depend on whether you’re replacing one component or a whole unit. Here’s how the ranges shake out:
| Scope | Typical Installed Cost |
|---|---|
| Single-pane reglaze or sash replacement | $300 – $800 |
| Weatherstripping and seal replacement (per unit) | $150 – $450 |
| Hardware kit (locks, rollers, handles) | $200 – $600 |
| Window replacement (full) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
The biggest cost driver is whether you need a sealed glass unit versus just hardware. A fogged pane looks minor but usually means a full insulated glass unit swap, because the seal is what failed, not the glass. Impact-rated installations cost more because of the glass spec and the inspection requirement. Every job comes with a written line-item price before we start, so the numbers don’t move when the crew arrives.
DIY or Call Us?
A homeowner can safely check weatherstripping for cracks, tighten a loose door handle, or clean and lubricate a sliding track. Replacing a screen spline is also manageable with a spline roller and a little patience. That’s the honest split.
Where it goes wrong: anything involving the sealed glass unit, the frame’s structural seal, or the impact rating. If you’re in Coral Gables and you replace a sash with a mismatched unit, you’ve voided the impact rating on that opening, and a wind-load inspector will find it. Cutting glass, removing a full sash, and resetting a frame all take tools and practice most homeowners don’t have on hand, and a bad reglaze leaks rain into the wall cavity behind the frame. Call (833) 510-5367 and we’ll tell you over the phone whether it’s a part swap or a full replacement.
FAQs

How long do Barrette windows last in Coral Gables? Ten to twenty years is typical, but Coral Gables’ salt air and humidity shorten that for weatherstripping and hardware. Glass units often fail at the seal first, around year ten to twelve, while frame components hold longer if the sealant is maintained. Call (833) 510-5367 for an exact quote on your unit.
Can my failing Barrette window be repaired instead of replaced? Sometimes yes. If the glass is fogged but the frame and seals are sound, a sash or glass unit swap is the right call and costs a fraction of a full replacement. If the frame has rot or the impact rating has lapsed, replacement is the honest answer. Call (833) 510-5367 and estimates are free.
How long does a Barrette window or door part swap take? A hardware or weatherstripping job runs two to four hours. A full window or door replacement usually takes a day per opening, with an extra inspection window for impact-rated installations in Coral Gables. Call (833) 510-5367 to schedule your free estimate.
How do you source Barrette-specific parts? We start with the label on your sash or jamb to identify the exact series, then order OEM or a qualified equivalent depending on whether the part affects the impact rating. We don’t claim to carry parts on a truck, but we know where to get them and how to confirm they fit before we show up.
Every Bradford Remodeling Co Coral Gables project comes with a written price before we start and our 365-Day Done Right Promise. If something we install or repair fails within the year, we come back and fix it at no charge. Our technicians have up to 22 years of experience, and we’re part of the Garrison Partners family, held to The Garrison Standard on every job. Call (833) 510-5367 for a free estimate, and we’ll tell you exactly what your Barrette window or door needs before any work begins.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












