







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Coral Gables Owner’s Guide
We install Barrette-compatible kitchen components and carry the specifications to match them correctly. A standard kitchen remodel in Coral Gables runs $14,000 – $45,000 installed, and a cabinet installation alone runs $4,000 – $13,000. When a Barrette door, hinge, drawer system or trim piece fails, we quote the replacement in writing before anyone touches your kitchen. If you’re remodeling around existing Barrette cabinetry, that written price covers what we’re removing, what we’re matching and what we’re building back.
Owners usually find the failure the same way. A door drops its corner and won’t sit flush no matter how the hinges are adjusted. A drawer runs rough, then stops closing. In Coral Gables, humidity across a summer pushes laminated panels and MDF frames harder than the assembly ever saw in a plant up north, and the failure shows up years later, quietly, on the frames that face an exterior wall or a sink.
Which Barrette Models This Applies To

Barrette makes outdoor product by the truckload and kitchen cabinetry through its component lines, so the first job is figuring out which part family you actually own. Barrette door and drawer fronts, box frames, and the hardware that ties them are not interchangeable across model years. A hinge plate bored for one series has a different screw spacing than the next, and a door from a different line will hang but never sit flush.
Find the label first. Barrette parts carry a sticker or stamped mark on the inside of the door face, on the underside of the drawer box, or on the frame’s back rail. Failing that, measure: the door thickness in millimeters, the hinge bore diameter (common values sit near 35mm, but not every series uses it), the drawer box height and the reveal gap at the frame. Those four numbers, plus a photo of the label, tell us which part your kitchen needs.
Then there’s the OEM question. Genuine Barrette replacements match color, finish and drilling exactly, which matters if you’re replacing one door or one drawer front in a run of otherwise good cabinetry. Quality aftermarket equivalents exist for hardware – hinges, slides, bumpers – and often outlast the originals, because the aftermarket has kept making the stronger version of a part the original line stopped producing. For door and drawer fronts, color match makes OEM the honest choice unless you’re refacing the whole run. Barrette cabinetry pairs fine with KraftMaid and Wellborn boxes when a single failed unit is beyond saving, and our countertop partners Cambria and Silestone cut to whatever box goes in. We’re an independent contractor – Bradford Remodeling Co Coral Gables is not affiliated with Barrette – so our loyalty is to the match, not the label.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
- The door hangs and drags at the bottom corner. The hinge screws have pulled out of particleboard or the plate has bent. Once the screw holes wallow out, tightening won’t hold them – the hole needs a plug or the frame needs repair.
- A drawer runs gritty for a few inches, then sticks. The slide’s rollers have flat-spotted or the track has picked up grit. Under a Coral Gables summer, the particleboard box also swells, and a swollen box fights any slide.
- The laminate on a door face is lifting at the top or near the dishwasher. Heat and steam get under the edge and the glue line gives. That failure spreads across the face once it starts.
- The frame’s back panel is soft or bowed near the sink. A slow leak under the sink has been wicking into the frame for months. Press a thumb in; if it sinks, the frame is done.
- Doors won’t sit even in a closed run. Either hinges have lost their adjustment range or the frames were never shimmed plumb. The second case is a framing fix, not a hinge swap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Coral Gables owners actually pay, installed, with no surprises at the door:
| Scope | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: how many units are involved, whether we’re matching one door or a full run, whether the frames behind the face are sound, and how much the countertop has to come out to get there. Every price we quote is written and line-itemed. If it isn’t on the paper, it isn’t on the invoice. Labor, materials and cleanup are all in that number, and the work carries our 365-Day Done Right Promise. If a Barrette unit we installed fails inside the year, we come back and correct it at no charge.
DIY or Call Us?
You can safely tighten a hinge plate, replace a drawer slide that matches the original spec, swap a bumper or a shelf pin, and check your labels and measurements before you call. Those are low-risk and worth doing yourself. Where it goes wrong is a misdrilled door front, an over-torqued screw that cracks a frame, or a “replacement” door that technically fits but doesn’t match the finish after six months in Florida humidity. The result costs more than the part did.
Call (833) 510-5367 and we’ll tell you which part you need, quote the replacement in writing, and send a background-checked, uniformed technician to handle the swap. No guesswork, no surprise line items.
FAQs

Match-grade doors and solid frames commonly last 10 to 15 years in a Coral Gables kitchen, and hinges and slides half that. The weak point is the particleboard behind the hinge and the glue line on laminated faces, both of which the summer humidity and a dishwasher’s steam stress hardest.
Often yes, if the failure is a pulled screw, a bent hinge or a worn slide – those are repairable without replacing the door or the box. The one repair we don’t promise on is a swollen particleboard frame; if the panel is soft, replacement is the honest call. We’ll tell you which case you’re in before quoting. Call (833) 510-5367 for a free estimate.
A single drawer front or door swap is usually a short job once the part is on site, and a full run or a cabinet installation runs several days depending on scope. We schedule against a written start date and stick to it. Call (833) 510-5367 to schedule your free estimate.
We match the part to the label, bore spacing, thickness and finish, then source the OEM or the equivalent where OEM is no longer made. If your model is out of production, we say so up front and lay out the closest options – including fitting KraftMaid or Wellborn units into the same run, with Cambria or Silestone on top if the countertop has to come up. Every source is documented in the written quote before we start.
Call (833) 510-5367 to schedule your free estimate. Bradford Remodeling Co Coral Gables writes the price before the work starts, holds every job to The Garrison Standard, and backs every completed project with the 365-Day Done Right Promise. A live person answers, day or night.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












