







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Home Additions & ADU: The Coral Gables Owner’s Guide
If you have a Barrette structure on your property and something in it has failed, we install Barrette-compatible additions and ADU components in Coral Gables, with most projects running $45,000 – $130,000 installed. Standalone ADU construction in Coral Gables generally runs $90,000 – $220,000, and garage conversions $30,000 – $80,000.
Owners usually find the problem the same way. A guest suite that was tight through the dry season starts smelling musty after a week of July rain. The sliding door on a Barrette pool cabana stops latching square. A ceiling seam in the addition opens up, or the corner of a floor plate shows a hairline crack where the slab meets the wall. On older Barrette additions around Coral Gables, it’s often the fasteners and sealants at the roof-to-wall junction that age out first, not the framing itself. We’re an independent contractor, not affiliated with Barrette, and we spec replacements against what’s actually on your site rather than against a brochure.
Which Barrette Models This Applies To

Barrette structures vary a lot by series and era. Older modular additions and pool cabanas typically use common dimensional lumber and standard 2×4 or 2×6 wall framing with conventional sheathing; newer prefab ADU shells lean on engineered panels and proprietary connectors. Before we quote a component, we identify the structure by its data plate or stamped label (usually inside a utility closet, on a framing member, or under a floor hatch), then take field measurements of the failed area. A part that fits one Barrette series often doesn’t fit the next.
The OEM-versus-aftermarket call matters here. For structural connectors and panel splines, we go OEM or an exact-spec equivalent, because an undersized hanger or bracket changes how the load transfers. For finishes, doors, trim, and weather seals, a quality aftermarket component with published specs can outperform the original at lower cost, and we’ll tell you which is which in writing. We don’t stock parts and we don’t carry parts on a truck. We measure, order to spec, and install. The same written-price discipline applies here that we bring to cabinetry work with KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Home Additions & ADU Is Failing
- Musty smell or visible damp along the floor line. In Coral Gables, this usually traces to a failed sill seal or flashing detail where wind-driven rain pushes past the base of the wall, not to the slab itself.
- Sticking doors and out-of-square openings. Often a sign the structure has shifted on its foundation or the header has sagged, which points to a connector or bearing issue rather than the door.
- Cracks at seams between panels or where the addition meets the main house. Movement at a joint tells you the fastener or spline has given up, and Coral Gables’ soil movement plus seasonal moisture swings accelerate it.
- Roof-to-wall staining or soft sheathing. Failed step flashing or aged sealant lets water into the wall cavity; by the time the stain shows indoors, the sheathing behind it is often already compromised.
- Sagging ceiling or a floor that feels springy near a wall. This can mean a joist hanger or beam connection has loosened or corroded, and it should be looked at before anything else on the list.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Coral Gables, plan on these installed ranges. Every one includes the part, labor, and disposal of the failed component, plus a written price before any work starts.
| Scope | Installed range |
|---|---|
| Home addition (Barrette-compatible) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion to living space | $30,000 – $80,000 |
What drives the range: the size of the footprint, whether the foundation or roof structure needs correction, how much of the existing finish has to come out, and whether engineered or OEM connectors are required. Coral Gables also has its own permitting and inspection path for additions and ADUs, and we pull permits and pass inspections as part of the job. All finished work carries the 365-Day Done Right Promise: if our work fails within the year, we return and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Look for the structure’s data plate and note the model and series. Photograph the failed area with something for scale. Probe a soft spot gently with a screwdriver, and check the floor line and roof-to-wall junction for daylight or staining. That’s identification, not repair.
Where DIY goes wrong is structural. Replacing a joist hanger, a beam connector, or a panel spline means understanding load paths and using the correct fasteners in the correct pattern. Getting it wrong can turn a small repair into a sagging or unsafe structure, which is a real risk on a habitable addition. If you see a sagging ceiling or a springy floor, stop and call. We’ll look at it, give you a written range, and tell you honestly whether it’s a component swap or something bigger. Call (833) 510-5367 to schedule your free estimate, and a live person picks up any hour.
FAQs

In Coral Gables, exposed connectors, flashing, and exterior seals on a Barrette structure typically need attention well before the framing does, often in the 10 – 20 year window, because salt air and heavy summer rain push corrosion and sealant failure faster than in drier climates. Interior finishes and doors last longer if the roof and wall envelope stay tight. Call (833) 510-5367 for an exact quote: estimates are free.
Sometimes, yes. A corroded hanger or a lifted flashing detail can often be corrected without replacing the whole assembly, and we’ll tell you when a repair is the right call. When the substrate behind the failure is soft or the connection has lost its bearing, replacement is the safer path. Call (833) 510-5367 with your photos and model info so we can tell you which case you’re in.
A single failed component, like a flashing detail or a set of connectors, is usually a short job measured in a day or two; a full addition or ADU scope runs weeks. The honest answer depends on what’s behind the failure, and we put that timeline in writing before we start. Call (833) 510-5367 to talk through your project.
We identify your Barrette model, measure the failed area, and order to that spec from the manufacturer or a published-spec equivalent, which is why we don’t claim to have parts on a truck. You get a written price and a documented spec before anything is ordered. Call (833) 510-5367 for a free estimate, and we’ll walk you through sourcing.
If you’re in Coral Gables and a Barrette addition or ADU has a part that’s failed, we’ll put a written price in front of you before a single tool comes out, pull the permits, and back the work with the 365-Day Done Right Promise. Call Bradford Remodeling Co Coral Gables at (833) 510-5367 for your free estimate. We also install KraftMaid, Cambria, and Silestone finishes if the scope grows.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












