







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Coral Gables Owner’s Guide
We handle Ameristar-compatible kitchen remodeling in Coral Gables, and a full kitchen typically runs $14,000 – $45,000 installed, with a written price before any work starts. We don’t promise same-day remodels – nobody does a kitchen in a day – but we do answer the phone live, 24 hours, and we’ll get an estimator to you on a real schedule.
Ameristar isn’t a cabinet line. It’s a builder-grade appliance and component brand that shows up in a lot of Coral Gables homes built or updated through the 2000s, and the failures follow a pattern. A dishwasher starts leaving a thin film on glasses. A range hood fan gets loud before it quits. The cabinet box under the sink is soft because the Ameristar-supplied shutoff has been weeping for two years and nobody saw it. Homeowners usually call us after the second or third component goes, when patching one thing at a time stops making sense and the whole kitchen needs a plan. That’s the moment this guide is written for.
Which Ameristar Models This Applies To

We treat “Ameristar” as a component family rather than a single product line, because that’s how it actually appears in Coral Gables kitchens. Ameristar-built appliances and their OEM equivalents were spec’d into a wide range of mid-market homes, and the badge on the front panel tells you less than the data plate does. Before we quote anything, we pull the model and serial off the plate – usually inside the door frame on a dishwasher, under the hood canopy on a vent, inside the cabinet door on a built-in microwave – and we measure the rough opening, not just the visible face.
Here’s the compatibility gotcha that trips up online orders: Ameristar appliance cutouts and the cabinet openings built around them don’t always match current standard dimensions. A 24-inch dishwasher opening is nominally 24 inches, but we routinely find 23 5/8-inch rough openings in Coral Gables homes, and a replacement that’s a hair wide won’t slide in without trimming the cabinet frame. Vent hoods are worse – the duct collar position varies by series, and a hood that’s the right width can still need a duct transition that didn’t exist before. Measure the opening and the duct, not the old unit’s spec sheet.
On the OEM-versus-aftermarket call: for appliances still under a manufacturer warranty, we stay OEM. For everything else, a quality aftermarket equivalent from a documented brand often costs 20-30% less and carries its own warranty. We’ll show you both line items in writing and let you pick. We don’t carry parts on a truck and we don’t claim to stock Ameristar components – we source what the job needs and tell you the lead time up front. We also work with KraftMaid, Cambria, and Silestone when a kitchen is ready for full replacement rather than another patch.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Kitchen Remodeling Is Failing
Ameristar components rarely fail without warning. These are the symptoms we hear most in Coral Gables, and what’s usually behind each one:
- Cloudy film or grit on dishes after a wash cycle. The circulation pump or a clogged wash arm is losing pressure, or the water inlet valve is scaling up – both common in Coral Gables’ hard municipal water. If you’re rinsing dishes before loading, the machine has been declining for a while.
- Cabinet box swollen or soft under the sink. A slow leak from the Ameristar-supplied supply line or shutoff has been wicking into the particleboard. Particleboard doesn’t recover. Once it swells, the fix is replacement of that cabinet box, not a patch.
- Range hood that’s gotten loud, then weak. The blower wheel is out of balance or the motor bearings are dry. In Coral Gables humidity, grease film on the wheel accelerates this – a hood that’s louder than it was two years ago is on its way out.
- Microwave that runs but doesn’t heat. Usually the magnetron or the diode, not the control board. A built-in Ameristar unit that’s stopped heating is a repair-or-replace decision tied to the cutout size, since a new unit has to fit the same opening.
- Doors and drawers that won’t stay aligned no matter how you adjust the hinges. The cabinet frame itself has moved, often because a leak softened the substrate or the original install didn’t shim against an unlevel floor. Hinge adjustment won’t fix a frame that’s out of square.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Coral Gables, with a written line-item quote before any work begins:
| Scope | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the number: whether the cabinet boxes stay or go, whether plumbing and electrical rough-in has to be moved to fit new appliance dimensions, and material tier on counters and fronts. We separate parts and labor on the quote so you can see exactly what the Ameristar-compatible component costs versus the install labor around it. Every completed project carries the 365-Day Done Right Promise – a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge. Pricing is fixed at the written number; it doesn’t move at the door.
DIY or Call Us?
Plenty of this is safe to check yourself. You can read the data plate, measure the rough opening with a tape, photograph the duct collar, and test whether a dishwasher is getting power at the outlet. Do that before you call – it makes the estimate faster and the quote tighter.
Where DIY goes wrong: swapping a dishwasher or built-in microwave into an opening that doesn’t quite fit, then forcing it. That cracks the cabinet frame and turns a $400 component into a $2,000 cabinet repair. Anything touching the electrical rough-in – hardwired hoods, new circuits for a different appliance draw – is licensed-trade work, full stop, and we won’t walk a homeowner through it. Our technicians have up to 22 years of experience, they’re background-checked and uniformed, and you’ll know who’s coming before they arrive. Call (833) 510-5367 to schedule a free estimate, and we’ll tell you straight whether it’s a swap or a remodel.
FAQs

Ameristar-grade appliances and cabinet components typically give 8 to 12 years in South Florida, and humidity and hard water pull that toward the low end. Coral Gables’ salt air and mineral-heavy municipal water age seals, supply lines, and blower wheels faster than in drier climates. Call (833) 510-5367 for a free estimate – we’ll tell you what’s left on yours.
Sometimes, yes – a magnetron, a water inlet valve, or a hood blower motor can often be repaired if the chassis and cabinet opening are sound. The call turns on parts availability and whether the surrounding cabinet has water damage. If the box is soft, repair is throwing money at a losing structure, and we’ll say so in writing. Call (833) 510-5367 for a straight answer.
A single component swap is usually a one-visit job, half a day or less, once the part is on site. A full kitchen remodel runs weeks, not days, and we schedule it with a written timeline before we start. We don’t promise same-day remodels – anyone who does is selling you something. Call (833) 510-5367 to get on the schedule.
We match by model and serial number and by measured rough opening, then quote you OEM and a quality aftermarket equivalent side by side. Aftermarket from a documented brand often saves 20-30% and carries its own manufacturer warranty that backs our 365-Day Done Right Promise. Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with Ameristar. Call (833) 510-5367 for a written quote with lead times.
Call (833) 510-5367 for a free estimate on your Ameristar kitchen project in Coral Gables. A live person answers, day or night, and you’ll have a written price in hand before any tool comes out.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












