







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Bathroom Remodeling: The Coral Gables Owner’s Guide
Ameristar bathroom remodeling in Coral Gables typically costs between $9,000 and $28,000 installed, and we give you that range in writing before any work starts. Owners usually find out something has failed the morning a shower won’t drain, a vanity fits loosely in its cabinet run, or a tile edge on the Roman floor lifts and won’t press back down. The failure is rarely sudden. It shows up as a symptom you explain away twice before you call anyone: a slow drain you blame on soap, a soft spot near the pedestal you step around, a seam in the surround you keep meaning to reseal. Bradford Remodeling Co Coral Gables installs Ameristar-compatible bathroom work across Coral Gables and the surrounding neighborhoods, and we quote the replacement in writing before we touch a thing.
Key Takeaways
- Installed Ameristar bathroom remodeling in Coral Gables runs $9,000 – $28,000, quoted in writing up front.
- Ameristar compatibility is decided by series and rough-in dimensions, not by how the old part looks.
- Every completed project carries the 365-Day Done Right Promise, a full-year written guarantee.
- We are an independent remodeling contractor and are not affiliated with Ameristar.
- Our technicians have up to 22 years of experience, and you’ll know who’s coming before the crew arrives.
Which Ameristar Models This Applies To

Ameristar bathroom products come in series lines, and the series – not the year printed on the glass or the vanity door – decides which parts and rough-in dimensions fit. Before we order anything we pull the model and series number off the label, usually inside the vanity door, on the faucet shank, or on the shower surround’s edge trim. From there we measure the rough opening and the drain and supply centers ourselves. An Ameristar vanity cut for a 31-inch rough-in will not sit over a 24-inch cabinet run without a cabinet modification you’d notice the second you look at it.
The OEM-versus-aftermarket call is specific to Ameristar. Manufacturer-spec parts and trim keep the original warranty terms intact, while a quality aftermarket equivalent can save money on pieces that were never the weak point – a shower valve cartridge, for instance. Trim and finish pieces are where we lean toward OEM and where the series gap bites hardest: an Ameristar base that fits one series often won’t fit the next, and the difference is a half-inch of substrate clearance you can’t see from the outside. If you want the specification traceable, we install a documented roster of name brands including KraftMaid, Cambria, and Silestone where the scope calls for cabinetry or surfaces. Give us a call at (833) 510-5367 with the series number and we’ll tell you what fits before you spend a dollar.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Bathroom Remodeling Is Failing
South Florida is hard on bathroom assemblies. Heavy seasonal rain, high humidity, and near-constant interior moisture cycling work on substrate, caulk lines, and grout joints year-round. In Coral Gables we see the same handful of failures come back:
- Soft or bouncy floor near the shower or tub. Water has reached the substrate under the tile or the pan, and the board has begun to give. Left alone, that soft spot spreads toward the framing.
- Recurring mold at the caulk line, coming back within weeks of cleaning. The sealant is failing and moisture is trapped behind it. Resealing over wet substrate just traps it again.
- Vanity doors that no longer align and won’t stay adjusted. The cabinet box or the mounting has shifted, often because the wall behind it took on moisture. The hinges were never the problem.
- Slow drains and gurgling at the trap. A partial clog or a failing P-trap seal is letting sewer gas back into the room. This is plumbing, not a drain cleaner problem.
- Loose tiles that sound hollow when tapped. The thinset bond has failed. A single loose tile usually means the waterproofing beneath it has already been compromised, especially in a shower.
The pattern matters more than any one symptom. Two or more of these together, and the odds are you’re looking at a substrate and waterproofing problem underneath the visible finish.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest Coral Gables pricing. A full Ameristar bathroom remodel runs $9,000 – $28,000 installed, and a small bathroom remodel runs $5,000 – $12,000. A walk-in shower installation is $4,500 – $12,000, and a tub-to-shower conversion is $3,500 – $10,000. A straight shower replacement is $3,000 – $8,500, and a vanity installation alone is $800 – $3,000.
What moves the number: whether the substrate and waterproofing have to come out, whether the rough-in has to move, tile selection and coverage area, and how much plumbing is actually failed versus just old. We break the quote down into parts and labor line by line so the parts figure and the labor figure are both visible. No change orders at the door, no numbers that move once the crew is in. Every completed project is covered by the 365-Day Done Right Promise. If the work fails within that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Read and photograph the model and series label. Note where the soft spots are, whether tiles sound hollow, and how quickly the caulk mold returns. You can tighten a cabinet hinge or a loose vanity leg, and you can pull the debris out of a drain cover. Do that, and you’ll have a clearer picture.
What you shouldn’t take on is the substrate and waterproofing work behind a shower or tub, and any rough plumbing. Water damage that looks like a loose tile is often a failed waterproofing layer, a shower pan liner, or wet framing, and sealing over it without fixing the cause is how a small repair becomes a full rebuild. Teasing out whether an Ameristar valve body needs reworking or just a cartridge is the same kind of call. This is not the place for guesswork. Call (833) 510-5367 to schedule your free estimate and get a written price you can hold us to.
FAQs

A properly installed Ameristar bathroom remodel typically lasts 15 to 25 years, and the parts that fail first are the waterproofing and caulk lines, not the tile or the vanity. Coral Gables humidity and seasonal rain speed up those failures, so we check and re-seal the wet areas as part of the job. Call (833) 510-5367 for an exact quote – estimates are free.
Sometimes, yes. A single failed cartridge, a re-seal on sound substrate, or a vanity reset can be repaired instead of replaced. If the substrate or shower pan has taken on water, a repair just delays the rebuild and we’ll tell you that plainly. Call (833) 510-5367 and we’ll give you a written recommendation either way.
A vanity or fixture-level swap is usually a one- to three-day job, while a full shower replacement or tub-to-shower conversion runs five to ten working days depending on substrate and plumbing. A full bathroom remodel takes longer. We agree on the schedule in writing before we start. Call (833) 510-5367 to schedule your free estimate.
We match parts to your Ameristar series and model number and order them from supplier stock against that specification, then verify the fit against your measured rough-in before installation. If an OEM part is unavailable, we’ll tell you what the quality aftermarket equivalent is and let you decide. Call (833) 510-5367 to get your model number on record.
Bradford Remodeling Co Coral Gables works under The Garrison Standard: a written price before any work starts, background-checked and uniformed technicians on every job, a live person answering the phone 24 hours a day, and the 365-Day Done Right Promise on every completed project. We work from a documented roster of name-brand materials, with Ameristar-compatible bathroom work alongside KraftMaid, Cambria, and Silestone where the scope calls for them. We are an independent remodeling contractor and are not affiliated with Ameristar. Call (833) 510-5367 for a free estimate on your Ameristar bathroom project in Coral Gables.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












