







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Kitchen Remodeling: The Coral Gables Owner’s Guide
ActiveYards-compatible kitchen remodeling in Coral Gables typically runs $14,000 – $45,000 installed, and because materials have to be ordered and staged rather than pulled off a truck, we schedule these projects around a written timeline, not same-day. There is no same-day availability here: this is a planned build. But every price you get from us is a written price before a single tool comes out, and every finished kitchen carries our 365-Day Done Right Promise – if the work fails inside that year, we come back and correct it at no charge.
Homeowners around Coral Gables usually discover a problem in their ActiveYards kitchen setup at the point of failure: a cabinet box that has swollen at the toe kick, a drawer glide that binds halfway open, a cabinet door that no longer sits flush against the face frame. The diagnosis starts with identifying which ActiveYards series you actually own, then matching the component to it. Between the salt air off Biscayne Bay and the humidity that pushes through every Coral Gables home from June to October, the failure pattern here is different from a dry-climate market.
Key Takeaways
- ActiveYards kitchen components are series-specific – part numbers are not universal across the line.
- Installed kitchen remodeling in Coral Gables runs $14,000 – $45,000; small kitchens $9,000 – $20,000.
- Humidity and salt air in Coral Gables accelerate swelling and finish breakdown on cabinet substrate.
- Bradford Remodeling Co Coral Gables is an independent remodeling contractor and is not affiliated with ActiveYards.
Which ActiveYards Models This Applies To

ActiveYards cabinetry is organized into series lines, and the components are not interchangeable across them. The door style, box construction, and drawer glide system all vary by series, so the first job is confirming which series your kitchen was built with. Look inside any base cabinet or on the back of a drawer box – most ActiveYards installations carry a label with the series and finish code printed on it. If no label survives, measure the cabinet box depth and the drawer box height, because those two dimensions narrow the field to a handful of possibilities.
This creates a real compatibility gotcha that catches a lot of Coral Gables owners: a drawer glide that looks visually identical to a current ActiveYards glide can have a different mounting hole pattern from an earlier production run of the same series. Two glides that look the same will not swap cleanly if the hole spacing shifted. Measure before you order, not after.
The OEM-versus-aftermarket decision comes down to two things: exactness and speed. Original ActiveYards components guarantee a match but can carry a lead time. A quality aftermarket equivalent from a documented manufacturer can be faster and less expensive, but only if the spec sheet matches on load rating, mounting pattern, and depth. We source against the spec, not against a photo. We also work with KraftMaid, Cambria, and Silestone materials on these projects where the owner wants to move the kitchen past the original factory spec entirely.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Kitchen Remodeling Is Failing
- Toe kick or cabinet box swelling at the base. Moisture wicks into MDF or particleboard substrate from floor cleaning and ambient Coral Gables humidity, and once the core swells it will not dry back to shape. This is the single most common failure we see in Coral Gables kitchens.
- Drawer glide binding or grinding. Usually a worn glide or a bent track, but check the drawer box first – a swollen box in a humid house binds against a glide that is perfectly fine.
- Cabinet door sagging or rubbing the face frame. Typically a hinge that has lost adjustment or pulled from the frame where the screw holes have enlarged. Coral Gables homes with heavy daily use show this faster on the doors that carry the most traffic.
- Finish peeling or lifting at the edges and seams. Salt air and sun exposure through a west-facing window break down the factory finish over time. Once the edge seals lift, moisture gets behind the finish.
- Countertop seam separating from the cabinet run. Often not the countertop at all – the cabinet box below has shifted or swelled, and the seam line tells you where. We investigate the substrate before we quote a surface replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the installed ranges for Coral Gables, with parts and labor listed together so there is no surprise number at the door:
| Scope | Installed Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the number: how many cabinet boxes are actually damaged versus just the glides and hinges, whether a countertop has to come off to reach the substrate, and whether the owner is replacing one failed component or upgrading the whole run. A single glide replacement sits at the low end. A full kitchen remodel with new cabinetry and surfaces sits at the top. Every completed project carries the full 365-Day Done Right Promise – a written one-year guarantee, and if the work fails inside that window, we return and correct it at no charge.
DIY or Call Us?
A homeowner can safely check a few things. Look for the series label inside the cabinet. Measure the drawer box height and the cabinet box depth. Note whether the glide is a side-mount or an under-mount. Tighten a loose hinge screw with a screwdriver and see whether it holds. That much is diagnostic, and it saves time.
Where DIY goes wrong: replacing a single glide without checking whether the drawer box has swollen, or swapping a countertop seam without investigating the cabinet substrate underneath. On the cabinet work specifically, the risk is not injury – the risk is that you reorder the wrong glide, or you replace a component and the underlying water damage keeps spreading behind it. This is not the electrical or high-tension kind of dangerous, but it is the kind where guessing costs more than it saves. Call us at (833) 510-5367 and we will give you a written price before any work starts.
FAQs

A well-built box will hold up 15 to 20 years, but glides and hinges are the first wear items and typically need attention well before that – often in the 5 to 10 year range for the doors and drawers used every day. The Coral Gables climate shortens that: humidity and salt air speed up finish and substrate failure compared with a dry market. Call (833) 510-5367 for a written quote – estimates are free.
Yes, more often than not. A single binding glide or a sagging hinge is a repair, not a replacement, and the cost reflects that – cabinet installation runs $4,000 – $13,000, but a glide and hinge swap sits far below that. The countertop and cabinet box are the two places where a repair turns into a replacement, because once the substrate has swelled the fix is not a patch. Call (833) 510-5367 and we will tell you which you are looking at before anything is ordered.
A component repair is a one-visit job; a full cabinet or countertop replacement runs longer and is scheduled around material lead times rather than squeezed into a day. We give you the schedule in writing with the price, so you know what to expect before we start. Call (833) 510-5367 for a free estimate and a written timeline.
We match against your ActiveYards series and the measured spec, not against a photo. We do not carry parts on a truck and we do not claim stock – the correct component is ordered to the spec and then installed. That protects you from the wrong-hole-pattern glide problem. Call (833) 510-5367 to start a free estimate.
If your Coral Gables kitchen has a failed ActiveYards component or the whole run is at the end of its life, call Bradford Remodeling Co Coral Gables at (833) 510-5367. A live person answers 24 hours a day, seven days a week. Every job gets a written price before any work starts, background-checked, uniformed technicians, and the 365-Day Done Right Promise on every completed project. Our technicians have up to 22 years of experience. Estimates are free.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












