







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Home Additions & ADU: The Coral Gables Owner’s Guide
Home additions and ADU work tied to a Cover system in Coral Gables typically runs $45,000 – $130,000 installed for a standard addition, with accessory dwelling units landing in the $90,000 – $220,000 range depending on footprint and finish level. We install and correct Cover-compatible addition and ADU scopes, and we quote the whole job in writing before any tool comes out. Most owners find out something is wrong the same way: a door that won’t latch square, a hairline crack tracking up the new wall, or a punch-list item that never got closed out after the original crew packed up.
Key Takeaways
- Addition work in Coral Gables: $45,000 – $130,000. ADU construction: $90,000 – $220,000. Garage conversions: $30,000 – $80,000.
- We are an independent remodeler and not affiliated with Cover. We work to Cover’s specified scope and then stand behind the finished build.
- Every project gets a written price up front and the 365-Day Done Right Promise on the completed work.
- Our technicians have up to 22 years of experience on additions and structural tie-ins.
Which Cover Models This Applies To

Cover’s addition and ADU scope is specified per project rather than by a single part number, so the “compatibility” question is really about matching the build to the plan set Cover issued for your property. The spec sheet lives with your permit documents and the plan set stapled to it. Look for the sheet index page and the structural schedule; that’s where the required wall assembly, tie-in method, and footprint dimensions are spelled out. If you can’t find the set, the Coral Gables building department keeps the permitted drawings on file, and pulling them is the fastest way to know exactly what was specified versus what got built.
Here’s where owners get burned. A second crew comes in to finish or repair and builds to “what looks right” instead of the documented assembly. In Coral Gables, that gap shows up fast because our wind-load and moisture requirements are stricter than most of the country. An addition framed to a generic detail rather than the Cover spec for your address is a compatibility failure even if every board is straight. We build to the documented assembly and keep the spec traceable. We also install KraftMaid cabinetry, Cambria and Silestone surfaces on the finish side when an addition includes a kitchen or bath, so the interior scope matches the structural one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Home Additions & ADU Is Failing
- Doors and windows that stick or won’t latch square. Usually a sign the tie-in between the addition and the original structure has shifted, or the header wasn’t sized to the documented load. Settling under a Coral Gables rain load exposes it quickly.
- Hairline cracks running diagonally from corners of openings. This points to movement at the connection point, not cosmetic drywall shrinkage. The cause is often a missing or undersized connector called for in the plan set.
- Water staining or soft drywall near the roofline of the addition. Typically a flashing or soffit detail done off-spec. In our storm season, a small gap becomes an interior leak within one summer.
- Uneven floors or a noticeable step at the threshold between old and new. Comes from a subfloor that wasn’t matched to the existing elevation as specified, or a slab that cured unevenly.
- An open punch list months after the crew left. The most common failure of all: items documented but never closed. It’s a scope-discipline problem, and it’s exactly what The Garrison Standard exists to prevent.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Coral Gables, expect these installed ranges. The spread depends on footprint, foundation type, finish level, and how much correction the existing structure needs before new work can tie in.
| Scope | Installed price range |
|---|---|
| Home addition | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
What drives the number up: structural correction to an existing tie-in, impact-rated openings required for the addition, and finish selections on the cabinetry and surface side. What’s included in our written price: the documented scope, permits pulled and inspections passed, materials, and labor. The price you sign is the price you pay, no numbers that move at the door. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely pull the permit documents, confirm the plan set matches what was built, and document cracks, sticking doors, and staining with photos and dates. That record is useful and costs nothing. What you shouldn’t do is open up a tie-in, reframe a header, or patch a structural connection to “see what’s underneath.” Addition and ADU work involves load paths, wind-load connections, and moisture barriers; getting them wrong is expensive at best and unsafe at worst. This is genuinely trained-professional territory. If the failure is cosmetic and documented, we can scope the correction. If it’s structural, we diagnose it properly before quoting. Call (833) 510-5367 for a free estimate and a written price before any work starts.
FAQs

A correctly built addition should hold its assembly for decades, but connection points and flashing details are what fail first in South Florida’s rain and heat. Built to the documented spec, the structure outlasts the finishes. Call (833) 510-5367 if you’re seeing movement or staining and want it looked at.
Often yes. Sticking doors, cosmetic cracks, and flashing leaks can frequently be corrected without tearing out the addition, provided the underlying tie-in is sound. We diagnose before we quote so you’re not paying for a rebuild you don’t need. Call (833) 510-5367 for a free estimate.
Correction work on a documented punch list typically runs days to a couple of weeks; a full addition or ADU is a months-long build with permits and inspections. We put the schedule in writing with the price. Call (833) 510-5367 to get yours scoped.
We work from a documented roster of name-brand materials with manufacturer specs and warranties behind them, so every spec is traceable. That includes KraftMaid and Wellborn cabinetry, Cambria, Silestone and Caesarstone surfaces, and Kohler and Moen fixtures on the finish side. Call (833) 510-5367 to talk through your scope.
If your Cover addition or ADU has an open punch list, a structural question, or a detail that never got built right, the next step is a written price, not a handshake. Bradford Remodeling Co Coral Gables operates under The Garrison Standard: a written price before any work starts, background-checked and uniformed technicians on every job, a live person answering the phone around the clock, and the 365-Day Done Right Promise on every completed project. Call (833) 510-5367 for a free estimate. We’re part of the Garrison Partners family, independently owned and operated, and we’ll give you the number straight.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












