







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Bathroom Remodeling: The Coral Gables Owner’s Guide
Quikrete bathroom remodeling in Coral Gables runs $9,000 – $28,000 installed, and that figure includes surface prep, setting materials, tile or slab work, fixtures, and haul-away. The range is set by bathroom size, substrate condition, and whether we’re resetting over a sound slab or rebuilding one that’s moved. Quikrete is a materials brand, not a fixture line, so “Quikrete bathroom remodeling” almost always means a homeowner is working with a Quikrete patch, leveler, or tile-setting product and something around it has failed: a hollow patch under a shower pan, a hairline crack that came back, a threshold that crumbles when you step on it, or a new tile that’s tenting off a floor that wasn’t flat.
Which Quikrete Models This Applies To

Quikrete sells across a wide catalog, so match the product before you do anything else. The ones that show up in Coral Gables bathrooms fall into a few families: Fast-Setting Concrete mixes in the red and gray bags, Sand/Topping Mix and Concrete Patch for repairs, Floor Leveler for flattening a substrate, and the Polymer-Modified Tile Setting line. Read the bag, not the shelf. Two products that look alike (a fast-setting mix and a standard mix) behave very differently under a shower pan: the fast-setting version kicks in minutes, which is a benefit on a small patch and a problem if you’re mixing a full pour by hand.
On the floor leveler and topping products, check the printed coverage and thickness limits. Most Quikrete levelers are rated for a maximum depth per pour, and going past it means a second pass with a bonding agent between coats. That spec is on the bag and it’s the one thing homeowners skip.
The OEM-versus-aftermarket call matters here. Quikrete’s own line is the OEM reference, and quality aftermarket equivalents (Custom Building Products, Mapei, Ardex) are legitimate substitutes on most bathroom substrates when the spec matches: compressive strength, thickness rating, and cure window. Cheaper generic patch mixes are usually not a substitute because their cure and strength specs aren’t published. We’re an independent Coral Gables service provider and not affiliated with Quikrete, and we specify against the printed spec either way.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Bathroom Remodeling Is Failing
- A hollow thud under the shower pan or floor tile. The patch or leveler has debonded from the slab. It happens when the slab wasn’t cleaned, wasn’t dampened, or wasn’t primed before the pour.
- Hairline cracks that reappear in the same spot. The crack was bridged, not stabilized. A moving slab will keep telegraphing through a thin patch, and South Florida’s slab movement makes that more likely than in a stable climate.
- Crumbling threshold or curb. Usually a mix that was watered past spec to make it flow. Excess water kills compressive strength, and a bathroom door threshold takes traffic.
- Tented or loose floor tile. The Quikrete leveler wasn’t flat to tolerance before tile went down, or the leveler was poured too thin for the tile format. Large-format tile needs a flatter plane than small mosaic.
- Efflorescence or a damp ring at the base of walls. Moisture is wicking through a porous patch. In Coral Gables that’s compounded by our wet season and the way slab-on-grade bathrooms hold humidity.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full bathroom remodel in Coral Gables lands between $9,000 and $28,000 installed, and a small bathroom remodel runs $5,000 – $12,000. If the scope is narrower, these are the line items we quote:
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
The range is driven by substrate condition first, then tile selection, then fixture grade. A failed patch often hides a slab issue that only shows after demo, so we price the demo and inspection as its own step and tell you the revised number before we continue. Materials cost is broken out from labor, and every figure is in writing before work starts. The 365-Day Done Right Promise covers the completed work for a full year; if it fails inside that window, we come back and correct it at no charge.
For higher-end bathrooms we also work with KraftMaid cabinetry, Cambria, and Silestone surfaces, quoted as separate line items.
DIY or Call Us?
There is real DIY here, and there’s a line we won’t pretend isn’t there. You can safely pull up a loose threshold, chip out a hollow patch, check the bag’s printed mix ratio, and measure your floor for flatness with a straightedge. Those checks are useful and we’ll talk you through the readings.
Where it goes wrong: surface prep. Most Quikrete failures we see in Coral Gables trace to a slab that wasn’t scarified, wasn’t dampened, or was poured over a leftover patch. A concrete patch that bonds to old, contaminated surface looks fine for a season and then lets go. And if the repair involves anything under a shower pan or inside a wet wall, the waterproofing layer gets disturbed, and redo there means redoing the whole assembly. That’s where the money gets burned twice. If you’ve had a patch fail once, call us before pouring a second one. Call (833) 510-5367 and we’ll give you the real number.
FAQs

A properly prepped, correctly mixed and cured Quikrete patch on a stable slab should last 20 years or more. Failures usually happen inside the first two years, and those are almost always prep or mix-water errors. In Coral Gables, the coastal humidity and wet season can extend cure times; the bag’s full cure window is what to follow, not your calendar. Call (833) 510-5367 for a free estimate on replacement.
Sometimes, yes. A single failed threshold or a hollow spot under one tile can be removed and rebuilt as a targeted repair. Once the failure reaches the shower pan or runs under a large-format floor, we recommend scoping the whole bathroom. Call (833) 510-5367 for a free estimate and we’ll walk the actual failure with you before recommending scope.
A targeted patch or threshold rebuild is typically two to three days, with cure time built in. A shower pan or full floor replacement runs five to ten working days depending on tile and substrate. We give you a written schedule with the price, so the finish date is in hand before demo.
We specify against the printed product spec, whether that’s a Quikrete product or a comparable aftermarket line, and we don’t carry stock on a truck. Products are sourced for your job and documented on the quote with brand, product name, and quantity, so what arrived is what was paid for. Call (833) 510-5367 for a free estimate on your Coral Gables bathroom.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












