







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The Coral Gables Owner’s Guide
Tremron paver driveways in Coral Gables typically run $7,000 – $18,000 installed, and a spot repair on a settled or cracked section usually lands between $400 and $1,800. We install and repair Tremron-compatible pavers across Coral Gables, and we quote every job from a written, line-itemed scope before the first paver comes off the pallet. Where a full driveway replacement is the honest answer, the number is on paper before we start.
Owners usually find the problem the same way: a low corner of the driveway holding water after a summer storm, a paver rocking under a tire, or a hairline crack that widens every time the lawn crew crosses it. In Coral Gables, that pattern shows up fast. The limestone rock sits close to grade in much of the city, drainage falls toward the street or the swale, and the rainy season from May through October works a thin base loose from below. What looks like a paver failure is often a base failure wearing a paver’s face.
Key Takeaways
- Tremron pavers themselves hold up; the sand-set base and joint sand under them are what fail in Coral Gables.
- Installed paver driveway: $7,000 – $18,000. Section repair: $400 – $1,800. Resealing: $250 – $700.
- We write the price before work starts and back completed work with the 365-Day Done Right Promise.
- Background-checked, uniformed technicians on every job. Live person answers the phone, day or night.
Which Tremron Models This Applies To

Tremron makes pavers in two main formats, and the fix differs by format. Their tumbled and textured lines (the Old Towne, Mega Olde Towne, and similar profiles) are the common choice for Coral Gables driveways because the chipped edge hides minor settling and matches the older Mediterranean and Mediterranean-revival homes around Granada Boulevard and the Riviera neighborhood. Their dimensional and geometric lines run in stricter modules and are less forgiving of a soft base, since the tight joints telegraph movement straight up through the surface.
To match what you already have, measure a single paver face length × width × thickness rather than guessing from a photo. Tremron’s standard driveway thicknesses sit in the 2⅜-inch to 2¾-inch range, and a full-thickness paver will not blend into a thinner walkway or border course. Look for a stamp or the supplier’s delivery slip before you order anything. Tremron also runs color lots, so a replacement batch mixed years later rarely matches an aged, sun-bleached driveway exactly.
On the OEM-versus-aftermarket question: Tremron’s own pavers are the right call when you’re matching an existing field, because profile and color are the whole job. For base materials, joint sand, and polymeric joint stabilizers, a quality equivalent from a documented brand is a sound choice and sometimes a better one. We work with a documented roster of name-brand materials so the spec is traceable and the warranty holds. KraftMaid, Cambria, and Silestone fall outside this paving work, but we handle those too if your project stretches indoors.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Driveway & Pavers Is Failing
- Ponding water in the same spot after every storm. That’s a base that’s settled or a slope that’s fallen out of plane, not a paver problem. Coral Gables’ flat lots and clay-heavy fill make this the most common call we get.
- Pavers rocking or shifting underfoot. The bedding sand has washed out or the base wasn’t compacted in lifts. Once a paver rocks, its edges chip fast.
- Joint sand washing out during rainy season. Loose polysand and open joints let water straight into the base. Refilling without fixing the drainage just buys a season.
- Hairline cracks that run in a line across several pavers. A crack that follows a straight course usually means a hard spot or root underneath pushing up. Single random cracks are usually impact damage, not structural.
- Efflorescence, that white chalky bloom. It’s salt migrating up through the paver, and in South Florida humidity it’s a moisture sign as much as a cosmetic one. Persistent bloom points to water trapped below.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Coral Gables, our installed ranges are consistent across every job and written before we start:
| Scope | Installed Price Range |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Section repair (settled or cracked area) | $400 – $1,800 |
| Driveway sealing | $250 – $700 |
What drives the range: square footage, whether existing pavers can be reset or must be replaced to match a color lot, base depth and compaction, drainage corrections, and haul-away of old material. Every quote itemizes pavers, base stone, sand, stabilizer, labor, and disposal. No surprise numbers at the door. The 365-Day Done Right Promise covers the completed work: if the install fails within a full year, we return and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Walk the driveway and mark where pavers rock. Pour a bucket of water and watch where it pools and which way it runs. Check that joints are filled and that no paver sits more than a quarter inch proud of its neighbors. That gives you a clear picture to describe on the phone.
Where DIY goes wrong: setting a base. Paver driveways carry a car, and that needs a properly excavated, compacted, graded base under a full-thickness paver. Skipping compaction lifts or grading by eye is how a new paver driveway settles within a year, and the cost to redo it is the full install price again. Our technicians have up to 22 years of experience setting base and grading drainage in South Florida. Call (833) 510-5367 and we’ll tell you honestly whether your driveway needs a repair or a rebuild.
FAQs

How long do Tremron pavers last in Coral Gables? Twenty-five to thirty years or more is realistic for the pavers themselves when the base is done right. In Coral Gables’ heat and rainy season, the base and joint sand are what need attention first, usually within five to ten years if drainage is off.
Can Tremron pavers be repaired instead of fully replaced? Yes. A settled or cracked section can often be lifted, the base corrected, and the pavers reset at $400 – $1,800. Full replacement is only the honest answer when the failure is widespread or the pavers can’t be matched. Call (833) 510-5367 for a free estimate and a straight answer.
How long does a Tremron paver driveway install take in Coral Gables? A typical driveway runs three to five working days, depending on square footage, base depth, and weather. Section repairs are usually a single day. We give you the timeline in writing with the price.
How do you source Tremron pavers for a repair? We match your existing profile by measuring the paver face and thickness, then order through suppliers who carry the Tremron line, checking color lot against your driveway. We don’t claim to stock parts or carry them on a truck; we source the right paver for your driveway. Call (833) 510-5367 to start with a free estimate.
Bradford Remodeling Co Coral Gables is an independent service provider. We are not affiliated with Tremron.
Every Tremron driveway and paver job we take on starts with a written price and ends with a signed guarantee in your hand. Background-checked, uniformed technicians arrive on schedule. If the work doesn’t hold within a year, the 365-Day Done Right Promise brings us back at no charge. Call (833) 510-5367 today for your free estimate on your Coral Gables driveway or patio.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












