







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Coral Gables Owner’s Guide
Tremron-compatible bathroom remodeling in Coral Gables typically runs $9000 – $28000 installed, depending on the size of the room, the shower or tub configuration, and the tile and stone you choose. We work with Tremron products and the name-brand materials that surround them, and every price is written down before work starts.
Coral Gables owners usually find the trouble the same way: a grout line in the shower floor starts weeping onto the bathroom threshold, a paver-set tile face goes chalky after a wet summer, or a vanity top chips at the edge and takes the tile with it. This page covers how Tremron surfaces and fixtures behave in South Florida, what fails first, and what it costs to set it right. Bradford Remodeling Co Coral Gables is an independent service provider and is not affiliated with Tremron.
Which Tremron Models This Applies To

Tremron makes pavers, retaining wall systems, and surface products across several series, so the first step is confirming which product line is actually in your house. Tremron hardscape series like Olde Charleston, Suburban, and Tremron’s larger-format wall blocks all carry different nominal dimensions, and a bathroom feature wall or a tile-over-paver substrate depends on matching the right unit. Look on the back or edge of any loose piece for the stamped series name, and measure the finished face thickness with a tape – Tremron units run roughly 2 3/8″ to 2 3/4″ for standard pavers, but the actual figure matters more than the spec sheet.
The OEM-versus-aftermarket call is where Coral Gables jobs turn. Matching a discontinued Tremron color or a specific profile from an older pour run is often the hard part; a current-spec piece matched to your existing field is the reliable route. When we specify the surrounding materials, we pull from a documented roster – KraftMaid and Wellborn cabinetry, Cambria, Silestone and Caesarstone surfaces, Kohler and Moen fixtures – so the specs are traceable and the warranty holds. If the exact Tremron unit is gone, we tell you and show you the closest current equivalent before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Bathroom Remodeling Is Failing
Here’s what owners describe, and what’s underneath it:
- Grout cracking along the shower floor. Coral Gables’ humidity and temperature swings work joints year-round; a hairline crack that widens means the substrate has moved, not that the grout is bad.
- Chalky or faded tile face. UV exposure through a bathroom window and salt air off Biscayne Bay dull a Tremron surface; a white residue that won’t wipe off is a surface problem, not dirt.
- Loose tile or a hollow sound underfoot. Tap the floor – a dead thud means the thinset bond has let go. Water is getting behind the tile, and that’s a rebuild, not a re-grout.
- Water staining at the threshold or baseboard. The shower pan or the waterproofing layer has failed. In a 1920s Coral Gables house this often traces to a lead or older pan under the remodel.
- Chipped edge or a cracked vanity top. A Tremron face or stone edge taking a hit near a sink shows as a sharp chip; matching the piece to the field is the fix, and it’s often the fastest part of the job.
Replacement Cost & What’s Included

Installed bathroom remodeling in Coral Gables runs $9000 – $28000 for a full room. A small bathroom remodel is $5000 – $12000, a walk-in shower $4500 – $12000, a tub-to-shower conversion $3500 – $10000, and a shower replacement on its own $3000 – $8500. A vanity install is $800 – $3000. Here’s what moves the number:
| Item | Coral Gables range |
|---|---|
| Small bathroom remodel | $5000 – $12000 |
| Walk-in shower installation | $4500 – $12000 |
| Tub-to-shower conversion | $3500 – $10000 |
| Shower replacement | $3000 – $8500 |
| Vanity installation | $800 – $3000 |
| Full bathroom remodel | $9000 – $28000 |
The range is driven by substrate repair behind the tile, whether the rough-in plumbing has to move, and the surface material you pick. Every project gets a written price before work begins, and the whole job is covered by our 365-Day Done Right Promise – if it fails within that year, we return and correct it at no charge. Call (833) 510-5367 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can check safely. Tap the floor and wall tile for hollow spots, look for efflorescence or active weeping at the threshold, and measure a loose Tremron piece so you have the real dimensions in hand. That’s honest diagnosing, and it helps the estimate.
Where DIY goes wrong is the rebuild. Tearing out a shower means cutting into a waterproofing layer, and if you don’t re-establish the slope to the drain and the pan liner, water goes where it shouldn’t. A chipped vanity edge is a cut-and-fit job, not a caulk patch. The craft is in the substrate – the surface layer and the membrane under it – and that’s what makes the difference between a repair and a callback. Call (833) 510-5367 to schedule your free estimate; we’ll write the price before any tool comes out.
FAQs

A well-installed Tremron surface with a sound substrate should hold 15 to 20 years in South Florida, though the grout and waterproofing – not the tile face – are usually what go first. Salt air and summer humidity speed up joint wear, so a Coral Gables bathroom in a bayside home tends to need re-grouting sooner than an inland one. Call (833) 510-5367 for an exact quote – estimates are free.
Sometimes, yes. A chipped edge or a single failed joint can often be re-set or re-grouted to match, which saves the cost of the whole job. But once water is behind the tile or the substrate has moved, a repair just delays the rebuild. We’ll tell you which one you’re looking at after the free estimate.
A shower replacement runs 3 to 5 working days once materials are on site; a full bathroom remodel is typically 2 to 4 weeks. Tremron and stone lead times drive the schedule more than the labor. We give you a written timeline up front and answer the phone with a live person – 24 hours a day, 7 days a week – so you know where the job stands.
We source from a documented roster of suppliers and pull from the manufacturer’s spec list wherever possible – if your Tremron series is current, we match it; if the color or profile is discontinued, we show you the closest current unit and the two options in writing before any order. Nothing gets ordered without your signature on the spec.
Squared Away at Close
At the end of a Bradford job you get a clean site, a documented scope of what was done, and the 365-Day Done Right Promise signed and in your hand. That’s the standard we hold every Coral Gables bathroom to. Background-checked, uniformed technicians show up on every job, and someone answers the phone every time you call. We work with a documented roster of premium brands – KraftMaid, Wellborn, Cambria, Silestone, Caesarstone, Kohler and Moen among them – so the materials have manufacturer specs and warranties backing our own guarantee. We’re a member of the Garrison Partners family, established in 2004, and each location is independently owned and operated under The Garrison Standard.
Call (833) 510-5367 for your free estimate. We’ll give you the price range in writing, state exactly what the guarantee covers, and answer every question before work starts. No urgency tactics, no numbers that move at the door.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












