A Bradford company - serving Coral Gables, FL
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Tremron · Coral Gables

Tremron Kitchen Remodeling in Coral Gables, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Coral Gables
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A single-story rear room addition with tall windows and a new patio
A freestanding soaking tub in a remodeled primary bathroom
A whole-home remodel with the living, dining and kitchen areas opened up
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tremron Kitchen Remodeling: The Coral Gables Owner’s Guide

If you’re pricing a Tremron kitchen remodel in Coral Gables, most projects land between $14,000 and $45,000 installed, depending on cabinet layout, surface square footage, and whether the electrical or plumbing rough-in has to move. We don’t sell parts off a shelf or run a parts counter. We’re an independent remodeling contractor that installs Tremron-compatible kitchen materials, we’re not affiliated with Tremron, and we give you a written price before any work starts.

Call (833) 510-5367

How owners usually find us: a fixed cabinet front starts peeling at the bottom edge after two wet seasons, a surface panel chips near the sink where the substrate was never sealed, or a door hinge plate pulls loose from a cabinet box that wasn’t rated for the door weight. In Coral Gables, that’s the pattern. Salt air, humidity that sits near 80% most of the year, and the fine spray that drifts west from Biscayne Bay all push the same failure points faster than the inland spec sheets assume. We see it most often in homes built between the 1950s and the 1980s where the kitchen still has its original framing under a newer surface.

Which Tremron Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Tremron builds in several distinct material lines, and the compatibility question isn’t a logo question, it’s a dimension and series question. Kitchen projects typically involve their surface and panel lines (countertop slabs, backsplash tile, and cabinet-facing panels), not their hardscape lines (pavers, wall blocks, and coping). Those are a different spec family entirely, and a paver specification won’t cross over to a kitchen application even on the same finish name.

To identify what you actually have, pull the spec plate or the stamp on the back of the panel or the underside of the slab. Look for:

  • A series or collection name, not just “Tremron”
  • Nominal thickness (kitchen surfaces typically run 2cm or 3cm for slabs; panels vary by line)
  • Finish name, because the same color reads differently across series
  • A batch or lot number, which is what actually determines whether a replacement piece will match the one your neighbor bought two years later

If the stamp is worn or missing, measure the piece. Length, width, and thickness on a caliper will tell a trained eye which series you’re in. On the OEM-versus-aftermarket call: OEM is the right answer when you need a visible match (a peninsula end panel next to a ten-year-old slab). A quality aftermarket equivalent is the right answer on hidden components (substrate, backing, sealant, hardware). Our technicians have up to 22 years of experience across both paths, and we work from the manufacturer’s documentation on every specification, the same way we handle KraftMaid, Cambria, and Silestone projects. If a match can’t be confirmed from the stamp and the measurement, we say so before you spend the money.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tremron Kitchen Remodeling Is Failing

The failure isn’t dramatic. It’s gradual. Here are the five we see most in Coral Gables kitchens:

  • Edge lifting on the countertop. That’s usually a substrate problem, not a surface problem. The plywood or cement board underneath absorbed moisture and swelled, and the surface is doing its best to stay flat over a base that isn’t.
  • Discoloration or a cloudy film across the surface. Under Florida sun through a south or west window, UV exposure plus humidity pushes a finish toward haze faster than the manufacturer’s lifespan estimate allows. A dull patch that won’t polish out is usually finish degradation, not dirt.
  • Caulk lines re-opening within a season. Movement at the joint or a sealant that wasn’t rated for a wet, humid environment. Coral Gables kitchens near the water see this constantly. The joint flexes and the sealant gives before it should.
  • Chipping at the sink cut-out or the cooktop edge. Frequently a fabrication issue, where the cut was made before the substrate was properly supported. The chip starts at the weakest point and runs.
  • A hollow sound when you tap the surface. A hollow sound means the adhesive bond has separated. Once it’s separated, water gets under the panel and the failure accelerates quickly.

Any one of these is worth an inspection. Two or more together, and you’re likely facing a partial rebuild of the substrate, not just a surface swap. That’s a different scope and a different number, and we price both before you decide.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled staircase with wood treads and a slim metal railing

Here’s the honest range for Coral Gables, broken out by the work that’s actually involved:

  • Full kitchen remodel: $14,000 – $45,000
  • Small kitchen remodel: $9,000 – $20,000
  • Cabinet installation: $4,000 – $13,000
  • Countertop installation: $2,000 – $6,500
  • Backsplash installation: $800 – $2,500
  • Kitchen island installation: $3,000 – $10,000

What moves you up or down that range: whether the substrate has to be replaced, whether the electrical rough-in needs to move for a new layout, and the finish selection. The installation line is labor and setting materials. The surface or cabinetry line is the material itself. We put both on one written sheet so you can see exactly where the money goes, and that price doesn’t move at the door.

Every completed project is covered by our 365-Day Done Right Promise. If the work fails within that year, we come back and correct it at no charge. That guarantee is written and signed, in your hand, at close. Site clean at close, documented scope, and the promise in writing: that’s what squared away looks like on a Bradford job.

DIY or Call Us?

You can safely check a few things yourself. Look for soft spots around the sink and the cooktop cut-out by pressing gently. Run a level across the countertop to see if it’s still true. Tap the surface to listen for delamination. Photograph the spec stamp before you call, because that speeds up the match. None of that is dangerous.

What’s not a weekend job: pulling a fixed panel or surface section off a substrate that may be hiding water damage, cutting new fabrication on a surface that isn’t rated for a homeowner cut, or resetting a cabinet box that’s out of plumb. Get the fabrication wrong and you’ve voided the manufacturer’s warranty on the material and created a worse problem than the one you started with. On any remodel involving the electrical or plumbing rough-in, that’s licensed trade work, full stop, and it’s not a DIY category.

If you want to know what your actual scope looks like, call us at (833) 510-5367. A live person answers, day or night, and the estimate is free.

FAQs

A low-threshold walk-in shower with a bench and grab bar

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished basement family room with a media wall and wet barA powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquetteA second-story addition that matches the existing roofline

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Coral Gables

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Coral Gables team

A local vetted partner works across Coral Gables and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 510-5367
Local Service Coverage

Request a Free Estimate in Coral Gables

Tell us what you need - Bradford Remodeling Co Coral Gables responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch