







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Coral Gables Owner’s Guide
Unilock-compatible kitchen remodeling in Coral Gables typically runs $14,000 – $45,000 installed, with small kitchens landing at $9,000 – $20,000 and full layouts with a custom island reaching the top of that range. We install with a written price before any work starts and back the finished job with the 365-Day Done Right Promise. Most Coral Gables owners find the problem the same way: a cabinet door that no longer sits flush, a backsplash tile that has popped free of the wall, or a drawer that scrapes the frame after a humid summer. The fix usually isn’t a single failed part. It’s a substrate or a rough-in that wasn’t squared to the room, which is common in Coral Gables homes where walls have moved over several decades.
Which Unilock Models This Applies To
Unilock makes masonry and hardscape products, and that matters here. If you called us because a Unilock paver, wall block, or step unit failed near a kitchen door or an outdoor kitchen, the repair belongs to hardscape scope, not cabinetry. If your kitchen project is specified with Unilock hardscape outside the sliding glass door and KraftMaid or Wellborn cabinetry inside, you’re in the right place, because we manage both scopes under one written contract. The compatibility detail that trips people up: Unilock dimension and thickness tolerances are set at the plant, and a Florida supplier will sometimes substitute the nearest available profile, which changes the height of the finished surface by a fraction of an inch. That fraction is enough to throw a door threshold, a cabinet toe kick, or a tile transition out of alignment. Check the label on the pallet band or the product stamp on the side of the unit, record the full series name and the stated dimensions, and photograph the exposed edge with a tape measure in frame. Bring those to the estimate. On OEM versus aftermarket: for structural masonry units, stay with the manufacturer’s matching profile. For trim, adhesives, and setting materials, a quality aftermarket equivalent is fine and often specified, provided the spec sheet matches what the original called for. Bradford Remodeling Co Coral Gables is an independent service provider, not affiliated with Unilock. We also work with KraftMaid, Cambria, and Silestone, so specifications stay traceable.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
These are the five symptoms we’re called out for most often in Coral Gables kitchens.
- Efflorescence or white bloom on a masonry surface. Moisture is moving through the unit and depositing salts on the face. In Coral Gables humidity, that’s usually a missing or failed seal, not a bad unit.
- Grout or joint failure along a backsplash or threshold. The substrate behind it has flexed. Tile and stone crack at the joint because the wall or slab underneath isn’t rigid, which is common where a prior remodel skipped backer board.
- A cabinet carcass out of square with the countertop. Walls in older Coral Gables homes are rarely plumb. If the installer shimmed the cabinet to the wall instead of scribing to the room, doors and drawers will bind within a year.
- Water staining at the toe kick or under a sink base. A slow supply or drain leak, or a slope that sends water back toward the cabinet. Left alone, the particleboard or plywood base swells and the cabinet floor fails.
- Loose threshold or step at a kitchen-to-patio transition. The setting bed has separated. This is a trip hazard and, in Coral Gables, water intrusion point.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Coral Gables, installed, parts and labor included in one written number:
| Scope | Installed range |
|---|---|
| Kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the number: whether the substrate has to be rebuilt, whether the layout changes plumbing or electrical rough-in, and the material tier you choose. A straight swap of cabinets over sound walls sits near the bottom. Moving a sink or adding an island circuit pushes it up. Every price is written before any work starts, and we don’t move it at the door. The 365-Day Done Right Promise covers the finished work for a full year: if a joint fails, a cabinet goes out of alignment, or the installation doesn’t hold, we return and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: photograph the product label, measure the exposed unit, note where water is staining, and confirm whether a cabinet is out of square with a level against the countertop. That information makes the estimate faster.
Where DIY goes wrong is the rebuild. Removing a set cabinet or a failed backsplash in a Coral Gables kitchen often means opening the wall and finding old wiring or a supply line that isn’t shut off cleanly. Cutting into a wall without knowing what’s behind it is how a small repair becomes a permit and an inspection. We pull the permits, and we’re licensed and insured. If water is actively leaking or a cabinet has pulled from the wall, stop using it and call. Call (833) 510-5367 to schedule your free estimate.
FAQs

A correctly installed unit over a sound substrate should hold 20 years or more, even in South Florida humidity. Failure inside the first year almost always traces back to the substrate, the setting bed, or a missed seal, not the product. Call (833) 510-5367 for an exact quote; estimates are free.
Often, yes. A single failed joint, a popped tile, or a loose threshold can be reset and sealed if the substrate behind it is still sound. If the wall or slab underneath has moved, a reset will fail again within a season. We tell you which one you’re looking at before you commit to either.
A targeted repair runs a day to three days. A full kitchen remodel in Coral Gables typically runs three to six weeks, longer if permits and inspections are involved. You get the schedule in writing with the price, so you know what the job looks like before we start.
We order by the manufacturer’s series name and stated dimensions, matched to the label or stamp on your existing unit. If the exact profile is discontinued or on a lead time, we tell you the options and the timeline before ordering. No substitutions without your sign-off.
To get a written price for your Coral Gables kitchen, call Bradford Remodeling Co Coral Gables at (833) 510-5367 for a free estimate. A live person answers the phone around the clock, and every technician who arrives is background-checked and uniformed, so you know who’s at your door.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












