







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Home Additions & ADU: The Coral Gables Owner’s Guide
Belgard doesn’t make a “home addition” or “ADU” part. Belgard is a hardscape and masonry brand – pavers, retaining wall blocks, segmental wall systems – and the Belgard material that shows up on an addition or accessory dwelling unit in Coral Gables is almost always the paver surface at the entry, the walkway, the patio edge or the base course under a slab. So when we say “Belgard home addition,” we mean the hardscape tied to that addition, and our licensed crews handle both the structure and the Belgard finish so the two meet cleanly. A typical addition in Coral Gables runs $45,000 – $130,000 installed, and a standalone ADU runs $90,000 – $220,000.
Owners usually call us after they notice the paver apron at the new addition has sunk or heaved, or the retaining wall base under the slab has started to lean. That is a base or compaction problem, not a cosmetic one. It shows up in the first rainy season after the work is done, when water finds the weak spot under the Belgard surface. Our technicians have up to 22 years of experience, and every estimate comes in writing before a tool comes out.
Which Belgard Models and Systems This Applies To

Belgard paver lines that commonly appear around additions and ADUs include the Urbana and Catalina slab-style pavers, Mega-Lafitt and Dimensions for the base and step faces, and the Belgard Castle Manor and Diamond wall systems for retaining a raised addition pad or a stair cheek. These lines have different thicknesses and edge profiles, and the paver under a threshold has to sit flush with the finished floor – not the rough slab – or you get a trip lip and water pooling at the door.
Identifying the right part starts with the joint. Are the pavers sand-set or polymeric-sand-set? Is there a mortar setting bed, or are they on a compacted aggregate base? Basement-grade Belgard wall blocks and slab pavers are not interchangeable, and a contractor who treats them as the same thing will get the base wrong. Measure thickness on an intact piece: Belgard slab pavers come in nominal sizes, and a replacement that is even 3/8″ off changes the joint line. The other gotcha in Coral Gables is the color and finish run – Belgard’s color batches vary, and a paver matched from a 2019 install may not match the current production. Pulling an intact piece from behind a planting bed and matching it in person is the honest way to do it.
The OEM-versus-aftermarket call matters here. Belgard-compatible is not Belgard. A generic 2-3/8″ paver that meets the thickness spec will not match the mottled face of a Catalina slab, and in a wall system the block’s interlocking lips are proprietary. Use Belgard-brand blocks for any structural or load-bearing wall and Belgard or a true same-profile match for the surface. We are an independent contractor and not affiliated with Belgard; we source genuine Belgard through the brand’s distribution network when the match calls for it, and we’ll say so on the written estimate when an equivalent is a better fit for budget.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Home Additions & ADU Is Failing
Most of these are visible before the surface crumbles. In our experience, Coral Gables owners catch this part late because it fails quietly, and the rainy season is when it gives up.
- Sinking or heaving at the threshold. The aggregate base was undersized or not compacted in lifts of 2-3 inches. Coral Gables’ sandy, high-water-table soil lets the base migrate, and the paver drops a quarter-inch in the first season.
- Paver or slab edges chipping. That is an edge-restraint failure – the restraining edge spikes or plastic edge are missing or too shallow. Without a proper edge, the surface spreads under foot traffic.
- Efflorescence and white staining. Water trapped under the paver wicks up and leaves salts. It can be cosmetic, but if it returns after every rain, water is getting under a setting bed that should have drained.
- Wall base leaning or block lips exposed. The retaining block was set without the right buried course. In a Coral Gables addition, that can pull the slab and the wall joint apart within a year.
- Joint sand washing out. Polymeric sand that was installed wet or not rain-cured loses its bond, and the joints open. Once they open, the base is exposed to the next downpour.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Belgard-surface addition in Coral Gables, the structural addition and the hardscape are figured together. The ranges below are installed, not the price of a part.
| Scope | Installed range (Coral Gables) |
|---|---|
| Home addition (structure + Belgard finish) | $45,000 – $130,000 |
| ADU construction (Belgard pad, walkway, entry) | $90,000 – $220,000 |
| Garage conversion (Belgard apron and approach) | $30,000 – $80,000 |
What drives the range: the base depth and compaction for Coral Gables soil, whether a retaining wall is needed to hold the pad, whether a permit is pulled and inspected, and whether the pavers are sand-set or a mortar bed. We put the parts – the pavers, the wall blocks, the edge restraint, the polymeric sand – on the same line-item quote as the labor. You see the part cost and the install cost separately. No numbers that move at the door. All completed work is covered by the 365-Day Done Right Promise – a full year, in writing; if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely check the obvious things. Run a straight edge across the pavers and push a screwdriver into an open joint to test the base. Look at the wall base – if the buried course is exposed, stop there. Lift one intact paver from a planted area and note its thickness, its colorway and whether it has a mortar bed under it. That is a look, not a lift of anything structural.
Where DIY goes wrong: re-laying a paver on a failed base without addressing the base simply resets the clock, and a Belgard retaining block wall holds real weight. A wall set on a shallow footing can move, and an addition pad that moves with it is a foundation problem. If your “part” is a wall block, a threshold slab or a step face that carries load, this is not a weekend job. Call (833) 510-5367 and we’ll look at it, put a price in writing, and tell you honestly whether it’s a repair or a rebuild.
FAQs

A properly based Belgard paver surface should last decades – 25 to 50 years is the usual range – and the paver itself is rarely the failure. What fails first in Coral Gables is the base and the joint sand, because our soil moves and the rain is heavy. A surface that was compacted in lifts and edged correctly holds; one that wasn’t shows problems in the first rainy season. Call (833) 510-5367 for a free estimate if you’re seeing movement.
Often yes. A single sunken paver or a short run of joint failure is a repair: pull, reset on a corrected base, re-sand and re-cure. A leaning wall or a pad that has separated from the addition is a rebuild of the base, not a spot fix. We tell you which one it is in writing before anything starts.
A paver or wall repair is usually a one- to three-day job. A full addition or ADU with Belgard finish is a multi-week build that depends on the permit and the inspection schedule, and we’ll put that timeline on the written quote. We don’t quote a start date we can’t hold.
We source genuine Belgard through the brand’s distribution network and match the colorway against an intact piece you pull, since color batches vary between production runs. If a true same-profile Belgard match isn’t available, we’ll tell you and quote the closest equivalent rather than passing off a generic paver as the same. We also work with KraftMaid, Cambria and Silestone on adjoining interior scopes, so the finish carries through.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.
Call (833) 510-5367 for a free estimate. Every price is in writing before work starts, our technicians are background-checked and uniformed, and a live person answers the phone 24/7 – not a voicemail. Every completed project carries the 365-Day Done Right Promise.












