







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Kitchen Remodeling: The Coral Gables Owner’s Guide
Belgard kitchen remodeling in Coral Gables typically runs $14,000 – $45,000 installed, depending on layout, cabinetry scope, and whether the floor, backsplash, or island are part of the job. We install Belgard-compatible kitchen work with a written price before any tool comes out, and estimates are free. We’re an independent service provider, not affiliated with Belgard.
Most Coral Gables owners don’t start with a part number. They start with a symptom: a cabinet door that won’t stay closed, a caulk line that keeps cracking under the sink, a backsplash joint pulling away from the wall. Those are the early signals that a prior install wasn’t squared away, or that a fixture has reached the end of its service life. The next step is usually a phone call, and we answer it. Every completed project carries the 365-Day Done Right Promise, so if the work fails inside a full year, we come back and correct it at no charge.
Which Belgard Models This Applies To

Belgard’s product lines split between hardscape and interior kitchen finishes, and the kitchen-relevant names are the ones worth knowing: Belgard Dimensions and Tremron (Tremron is a Belgard brand) tile lines, plus Belgard’s stacked-stone and ledger-style profiles used for backsplash and island faces. If your spec sheet names a series rather than a single SKU, that’s normal. The series carries the size and finish family, and the install details get set on site.
To identify the right part, look for the piece’s cast-or-molded back stamp, the box label, or the original invoice from the prior install. Measure the field tile or the ledger course width to the sixteenth of an inch. Belgard dimensional tile in this market commonly runs modular sizes in the 2-inch to 6-inch height band, and a mismatch of a quarter inch shows in the grout line. That’s the compatibility gotcha most homeowners miss: two finishes with the same name and different series will not interlock cleanly. An OEM part matched to your series is the sure route. A quality aftermarket tile that meets the same height and finish spec can work for a small patch, but we’d want the spec in hand before we quote it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Kitchen Remodeling Is Failing
- Grout cracking along the backsplash joint. Coral Gables humidity moves the wall assembly, and a rigid grout line with no movement joint at the counter seam cracks first. Once water gets behind the tile, the thinset bond breaks down.
- Tile or ledger face lifting off the substrate. This is a bond failure, not a tile failure. It usually traces to a substrate that wasn’t prepped, a dry-set mud that set too fast, or a wall that shifted after install.
- Caulk line at the sink or cooktop pulling away. Heat cycling and standing water break down standard caulk in 18 to 36 months. In south Florida’s humidity, we lean on mold-resistant sealant rated for wet areas.
- Efflorescence (white powder) on the tile face or grout. Mineral salts are wicking through the surface from behind. It looks cosmetic, but it means moisture is moving through the assembly.
- Different dye lot showing in a repair patch. A previous repair used a different batch. Belgard finishes vary by run, and a mismatched patch is the most common “it looked fine on the sample” complaint we hear in Coral Gables.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed prices in Coral Gables run in these ranges. These are real numbers, not “call for a quote.”
| Work | Installed Range (Coral Gables) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Backsplash installation | $800 – $2,500 |
| Countertop installation | $2,000 – $6,500 |
| Cabinet installation | $4,000 – $13,000 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: square footage of the finish field, tile or stone profile chosen, whether the substrate needs replacement, cabinet box count, and whether the electrical or plumbing rough-in gets moved. Parts plus labor are quoted as a line item. Nothing reprices at the door. The written price is fixed before work starts, and the 365-Day Done Right Promise covers the labor and the install for a full year.
DIY or Call Us?
You can safely measure, photograph, and check the back stamp on a loose piece. You can inspect the caulk line and log where the cracking runs. That’s the safe zone.
The work past that is not a DIY job. Removing tile from a wall means cutting the thinset bond without damaging the substrate or the cabinet box behind it. Setting the new tile correctly means the right substrate preparation, the right thinset for a humid Coral Gables climate, and a movement joint at the seams. Done wrong, a patch fails in six months and takes the wall with it. We’d rather do the small job right once. Call (833) 510-5367 to schedule a free estimate, and we’ll put the scope and the number in writing.
FAQs

How long does Belgard kitchen tile last in Coral Gables? A properly installed Belgard tile or ledger backsplash lasts 15 to 25 years in south Florida, and the finish holds as long as the substrate and the grout line stay intact. The failure point is almost always the caulk and grout joint at the counter seam, which needs freshening every 3 to 5 years. Call (833) 510-5367 for an exact quote, and estimates are free.
Can a failed Belgard tile be repaired instead of replaced? Yes, in most cases a localized repair is the right call and costs far less than a full re-tile. A single piece or a short ledger run can be matched if we can ID the series and confirm the dye lot. If the substrate behind it has failed, the repair grows. We’ll tell you which case you’re in before you commit. Call (833) 510-5367 for a free estimate.
How long does a Belgard kitchen tile swap take? A backsplash field replacement runs two to four days in a Coral Gables kitchen, including substrate prep and cure time. A full kitchen remodel with Belgard finishes and new cabinetry runs three to seven weeks. The schedule gets written into the scope. Call (833) 510-5367 to schedule your free estimate.
How do you source the Belgard part? We source through distributors against the series name, back stamp, or original invoice, and we confirm the dye lot before it’s ordered. We don’t carry parts on a truck. We also install KraftMaid, Cambria, and Silestone alongside Belgard, so a single scope sheet can cover the whole kitchen. Call (833) 510-5367 for a written quote.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












