







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Fence Installation: The Coral Gables Owner’s Guide
ActiveYards fence installation in Coral Gables typically runs $3,500 to $9,000 for a fully installed residential run, depending on material, linear footage, and gate count. We install ActiveYards-compatible vinyl and aluminum systems and can usually schedule an assessment within a few days. Most owners find the problem the same way: a post that rocks when they lean on it, a gate that drags the ground after the rainy season, or a panel that has gone chalky and brittle on the sun-facing side. Bradford Remodeling Co Coral Gables is an independent contractor and is not affiliated with ActiveYards.
Here’s what matters up front: in Coral Gables, fences fail from the bottom and the top at the same time. The bottom sits in our high water table and limestone-heavy soil. The top takes full summer UV. A fence can look fine at eye level and still be a season from leaning.
Key Takeaways
- Installed ActiveYards-compatible fence runs $3,500 – $9,000 in Coral Gables.
- Your written price comes before any work starts, every time.
- Every completed install carries the 365-Day Done Right Promise.
- Post footings and UV exposure, not the panels, are what fail first here.
Which ActiveYards Models This Applies To

ActiveYards is a brand umbrella, not a single product line, so the first job is identifying what you actually own. The brand covers vinyl privacy systems (including its Lexington and similar styles), aluminum ornamental runs, and hybrid/composite lines. Compatibility mostly comes down to rail spacing, post cap profile, and panel width, not to a single universal part. A rail from one series will usually not seat into the post channel of another, even when the color name matches.
To identify your system, check three things before you call anyone:
- Post cap shape and rail pocket depth. Square caps with 1.5-inch rail pockets point to one series; slotted or routed channels point to another.
- Panel width. Measure center-to-center across two posts. Common widths land near 6 feet or 8 feet, but the exact spacing tells us which section style you have.
- Original paperwork or the stamped mark on the post or rail. Many runs have a manufacturer mark molded into the inside face of a rail.
On the OEM-versus-aftermarket question: for structural parts (posts, rails, top caps), stick with the matching ActiveYards series so the warranty and the fit both hold. For fasteners, post inserts, and gate hardware, quality aftermarket equivalents are fine and often better. We’ll tell you which is which in writing. We also install KraftMaid, Cambria, and Silestone products on interior projects, but a fence is a fence – we won’t pad the scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Fence Installation Is Failing
Most ActiveYards fences in Coral Gables don’t fail suddenly. They give you warning signs. Here are the five we see most often and what’s actually happening underneath.
- Posts that rock or lean. The footing has lost its grip – usually shallow concrete in sandy soil, or a post set without enough depth to fight our water table. A leaning post is not a cosmetic problem; it’s a structural one, and the panel load follows it.
- Gates that drag or won’t latch. Coral Gables humidity swells wood and warps vinyl slightly, and a gate that was hung perfectly in dry weather sags once the rainy season hits. Hinge point or gate post is usually the culprit, not the gate itself.
- Panels that look chalky or yellow. UV exposure on the sun-facing side. Vinyl fades over time in South Florida’s sun; a chalky surface means the finish has broken down. Matching a replacement panel to a faded run is the tricky part.
- Loose or missing pickets and rail sections. Usually a fastener failure or a rail that’s cracked at the pocket. Small fix, but it weakens the whole section and should be caught before a storm season.
- Ground heaving around the posts. Our limestone-heavy soil and wet-dry cycles push posts up and out. If the concrete collar is cracking away from the soil, water is getting in and the footing is on its way out.
Any one of these is worth a look. Two or more together usually means the original install skipped a step, and a proper re-set is the honest fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed ActiveYards-compatible fence work in Coral Gables runs $3,500 to $9,000 for a standard residential run. The written price always comes before any work starts – no numbers that move at the door. Here’s what drives the range:
- Linear footage and gate count. More sections and more gates, more labor and more hardware.
- Post footing work. Re-setting or replacing posts in our soil is the single biggest cost swing. A section swap is far less than a full post reset.
- Material match. Blending a new panel into an older, faded run costs more because we have to color-match carefully.
- Access and removal. Hauling off old material and working tight side yards adds time.
The written quote is line-itemed: parts, labor, disposal, permits if any apply. Every completed install is covered by the 365-Day Done Right Promise – if the work fails inside that window, we come back and correct it at no charge. That’s The Garrison Standard in practice: a signed written guarantee in your hand at close, a clean site, and a documented scope.
DIY or Call Us?
Here’s the honest split. You can safely check your fence and identify what failed – walk the run, lean on each post, check the gate hardware, photograph the molded mark inside a rail. That’s useful information and it makes the estimate faster.
What we’d steer you away from: digging out a set post, resetting footings, or pulling loaded panels solo. A fence looks simple, but a post that’s been cut free in our soil can shift or fall while you’re beside it, and an unsupported panel can come down on you. Vinyl panels are light but awkward; a wrong move can crack a rail you then can’t match. And buried utilities in Coral Gables yards are not something to guess at – a professional locates before digging.
If a post is leaning or a gate has failed, that’s the point to call us. Phone is answered by a live person 24/7. Call (833) 510-5367 to schedule your free estimate.
FAQs

Expect 15 to 20 years for quality vinyl in South Florida, but UV is the real clock – the sun-facing side ages faster than the shaded side, and our humidity stresses fasteners and footings well before the panels themselves give out. Post footings are often the first thing to fail, not the vinyl.
Often, yes. A single leaning post, a sagging gate, or one cracked panel can usually be repaired rather than replaced, and we’ll tell you honestly when a repair makes sense versus when the run is too far gone. Call (833) 510-5367 for a free assessment – estimates are free.
A single-section repair or gate fix can be done in a day. A full residential run in Coral Gables usually takes a few days depending on footage, post work, and access, and the schedule is written into the estimate before work starts. Call (833) 510-5367 for a firm timeline.
We identify your exact series first, then source the matching part so it fits and keeps whatever warranty applies – we don’t guess at a universal replacement. You get the part details in the written quote. For an exact match on your run, call (833) 510-5367 and have your post measurements and any paperwork handy.
If you’re in Coral Gables and your ActiveYards fence has a post that’s given up or a gate that won’t close, the fix is a phone call. We put the price in writing before we touch anything, our technicians are background-checked and uniformed, and the work is covered for a full year. Call Bradford Remodeling Co Coral Gables at (833) 510-5367 for your free estimate – a live person answers, day or night.
Written by the team at Bradford Remodeling Co Coral Gables, serving Coral Gables and nearby areas.












