A Bradford company - serving Coral Gables, FL
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Barrette · Coral Gables

Barrette Kitchen Remodeling in Coral Gables, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Coral Gables
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A single-story rear room addition with tall windows and a new patio
A freestanding soaking tub in a remodeled primary bathroom
A whole-home remodel with the living, dining and kitchen areas opened up
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Kitchen Remodeling: The Coral Gables Owner’s Guide

We install Barrette-compatible kitchen components and carry the specifications to match them correctly. A standard kitchen remodel in Coral Gables runs $14,000 – $45,000 installed, and a cabinet installation alone runs $4,000 – $13,000. When a Barrette door, hinge, drawer system or trim piece fails, we quote the replacement in writing before anyone touches your kitchen. If you’re remodeling around existing Barrette cabinetry, that written price covers what we’re removing, what we’re matching and what we’re building back.

Call (833) 510-5367

Owners usually find the failure the same way. A door drops its corner and won’t sit flush no matter how the hinges are adjusted. A drawer runs rough, then stops closing. In Coral Gables, humidity across a summer pushes laminated panels and MDF frames harder than the assembly ever saw in a plant up north, and the failure shows up years later, quietly, on the frames that face an exterior wall or a sink.

Which Barrette Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Barrette makes outdoor product by the truckload and kitchen cabinetry through its component lines, so the first job is figuring out which part family you actually own. Barrette door and drawer fronts, box frames, and the hardware that ties them are not interchangeable across model years. A hinge plate bored for one series has a different screw spacing than the next, and a door from a different line will hang but never sit flush.

Find the label first. Barrette parts carry a sticker or stamped mark on the inside of the door face, on the underside of the drawer box, or on the frame’s back rail. Failing that, measure: the door thickness in millimeters, the hinge bore diameter (common values sit near 35mm, but not every series uses it), the drawer box height and the reveal gap at the frame. Those four numbers, plus a photo of the label, tell us which part your kitchen needs.

Then there’s the OEM question. Genuine Barrette replacements match color, finish and drilling exactly, which matters if you’re replacing one door or one drawer front in a run of otherwise good cabinetry. Quality aftermarket equivalents exist for hardware – hinges, slides, bumpers – and often outlast the originals, because the aftermarket has kept making the stronger version of a part the original line stopped producing. For door and drawer fronts, color match makes OEM the honest choice unless you’re refacing the whole run. Barrette cabinetry pairs fine with KraftMaid and Wellborn boxes when a single failed unit is beyond saving, and our countertop partners Cambria and Silestone cut to whatever box goes in. We’re an independent contractor – Bradford Remodeling Co Coral Gables is not affiliated with Barrette – so our loyalty is to the match, not the label.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Kitchen Remodeling Is Failing

  • The door hangs and drags at the bottom corner. The hinge screws have pulled out of particleboard or the plate has bent. Once the screw holes wallow out, tightening won’t hold them – the hole needs a plug or the frame needs repair.
  • A drawer runs gritty for a few inches, then sticks. The slide’s rollers have flat-spotted or the track has picked up grit. Under a Coral Gables summer, the particleboard box also swells, and a swollen box fights any slide.
  • The laminate on a door face is lifting at the top or near the dishwasher. Heat and steam get under the edge and the glue line gives. That failure spreads across the face once it starts.
  • The frame’s back panel is soft or bowed near the sink. A slow leak under the sink has been wicking into the frame for months. Press a thumb in; if it sinks, the frame is done.
  • Doors won’t sit even in a closed run. Either hinges have lost their adjustment range or the frames were never shimmed plumb. The second case is a framing fix, not a hinge swap.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled staircase with wood treads and a slim metal railing

Here’s what Coral Gables owners actually pay, installed, with no surprises at the door:

Scope Installed range
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: how many units are involved, whether we’re matching one door or a full run, whether the frames behind the face are sound, and how much the countertop has to come out to get there. Every price we quote is written and line-itemed. If it isn’t on the paper, it isn’t on the invoice. Labor, materials and cleanup are all in that number, and the work carries our 365-Day Done Right Promise. If a Barrette unit we installed fails inside the year, we come back and correct it at no charge.

DIY or Call Us?

You can safely tighten a hinge plate, replace a drawer slide that matches the original spec, swap a bumper or a shelf pin, and check your labels and measurements before you call. Those are low-risk and worth doing yourself. Where it goes wrong is a misdrilled door front, an over-torqued screw that cracks a frame, or a “replacement” door that technically fits but doesn’t match the finish after six months in Florida humidity. The result costs more than the part did.

Call (833) 510-5367 and we’ll tell you which part you need, quote the replacement in writing, and send a background-checked, uniformed technician to handle the swap. No guesswork, no surprise line items.

FAQs

A low-threshold walk-in shower with a bench and grab bar

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled hall bathroom with patterned floor tile and painted wallsA finished basement family room with a media wall and wet barA powder room with botanical wallpaper and a stone sinkA finished backyard cottage with a small covered porchA remodeled primary bathroom with a soaking tub and walk-in showerA remodeled living room with built-in shelves around the fireplace

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Coral Gables

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Coral Gables team

A local vetted partner works across Coral Gables and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 510-5367
Local Service Coverage

Request a Free Estimate in Coral Gables

Tell us what you need - Bradford Remodeling Co Coral Gables responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch